Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
cabinet face frame clamp from Kreg Tool holds cabinet face frames in position for one-step installation, so you can align, drill, and secure the joint in a single workflow. The clamp is designed for face frame cabinet installation, which helps streamline hanging and joining face frames in the shop or on site. Professional grade, all-aluminum construction creates a rigid clamping body, which supports repeatable setups when you are running multiple cabinets or frame joints. Thick protective pads contact the work at the jaws, so the clamping pressure is distributed over a larger area to help protect finished cabinet surfaces as you pull parts together. The hardened drill guide is integrated into the clamp, so pilot holes are guided square to the joint while the parts stay locked, which helps reduce bit wandering and keeps screw placement consistent across a run of cabinets.
The clamp works on stiles from 1-1/2 inch to 2 inch, so once you size your face frame stock in that range, you can move from cabinet to cabinet without changing clamp hardware. A jaw width of 2 inch centers pressure over the joint area, helping to hold rails and stiles flush while you drill through the hardened drill guide. The hardened drill guide with integrated pilot hole support keeps the bit location fixed relative to the joint, which helps maintain a clean screw line along a run of cabinets. Professional grade, all-aluminum construction keeps the tool weight manageable during overhead or wall cabinet work, which can help reduce fatigue during longer installation days.
The clamp is designed for face frame cabinet installation, so it fits naturally into workflows where face frames are joined, aligned, and fastened to cabinet cases. It works on stiles from 1-1/2 inch to 2 inch, which matches typical cabinet stile dimensions in many shop-built and job-site-built cabinets. This range lets you clamp a stile to a cabinet case or another frame member while keeping both parts aligned for drilling. A jaw width of 2 inch spreads clamping pressure across the face frame edge, which is useful when you are pulling slightly bowed parts into a straight line before driving fasteners. Thick protective pads sit between the aluminum jaws and the wood, so you can apply firm pressure on stained or painted frames while reducing surface marking during assembly.
The hardened drill guide with integrated pilot hole capability acts as both a locator and a bushing, directing the drill bit into the joint while the clamp holds parts fixed, which supports consistent screw placement down a run of cabinets. Because the clamp supports one-step face frame cabinet installation, you can clamp, drill through the guide, and drive screws in sequence, which helps maintain a uniform workflow across an entire kitchen or bank of built-ins. Professional grade, all-aluminum construction provides a rigid frame around the guide and jaws, so alignment at the drill guide stays stable from the first cabinet to the last. The clamp works on stiles from 1-1/2 inch to 2 inch, which means once you mill face frame stock to that range, your drilling and fastening pattern through the guide remains consistent on every piece.
The cabinet face frame clamp works on stiles from 1-1/2 inch to 2 inch, which matches common cabinet face frame widths and supports consistent setups across different cabinets.
The hardened drill guide with integrated pilot hole function directs your drill bit into the joint while clamping holds the parts steady, which supports accurate, repeatable screw placement.
The 2 inch jaw width spreads pressure across more of the face frame, which helps keep rails and stiles flush and tight, improving joint alignment while you drill and fasten.
Professional grade, all-aluminum construction keeps the clamp rigid yet light, which is useful when repeating the clamping and drilling process across multiple cabinets in a project.
The clamp holds the face frame in alignment while the hardened drill guide directs the pilot hole, so clamping, drilling, and fastening can happen in a single, continuous process.
Thick protective pads sit between the jaws and the work surface, so clamping pressure is cushioned, which helps reduce marking on painted or finished face frames during installation.
The Kreg Tool cabinet face frame clamp is built for one-step face frame cabinet installation, so it fits well into professional and serious DIY cabinet workflows. With a working range for stiles from 1-1/2 inch to 2 inch and a 2 inch jaw width, it supports common cabinet frame dimensions while holding joints flush. The hardened drill guide with integrated pilot hole keeps screw locations consistent from cabinet to cabinet. Add this clamp to your setup when precise alignment, repeatable drilling, and protected cabinet surfaces matter on every job.
Sold In: 1 Package