Rev-A-Shelf 4PIL Maple 7/8" Pilaster System, 4PILU-20-088-40
Description
Choose a Rev-A-Shelf pilaster system
Rev-A-Shelf pilaster system gives cabinet builders and installers a customizable way to create organized storage inside a door and drawer base cabinet. This Rev-A-Shelf cabinet organizer uses maple pilaster uprights made from natural maple with a semi-gloss finish. The product is designed to mount to the cabinet side, and the uprights can be trimmed both lengthwise and widthwise for a more exact fit. These trimmable pilaster uprights are supplied as pilaster uprights only, so buyers can pair them with compatible Rev-A-Shelf wood drawer boxes or provide their own. Right and left brackets can be used in the front and back, which helps simplify installation planning when laying out a door drawer base cabinet organizer.
Use maple pilaster uprights for access
- Natural maple construction - The Rev-A-Shelf product uses maple for a wood cabinet interior that matches many shop-built or upgraded cabinet projects.
- Semi-gloss finish - The finished surface supports a cleaner appearance and helps the maple pilaster uprights look ready for visible cabinet interiors.
- Trimmable lengthwise and widthwise - The cabinet pilaster system can be adjusted for a more custom fit when cabinet dimensions or layout details vary.
- Right and left brackets included for front and back use - The bracket layout gives installers more flexibility during placement and can make setup easier inside the cabinet.
- Pilaster uprights only - Buyers can pair the system with Rev-A-Shelf wood drawer boxes or use their own compatible boxes based on project needs.
- Designed for any door/drawer base cabinet - The drawer base cabinet pilaster format is intended for this cabinet style, helping buyers target the correct application.
- Can be stacked to reach desired height - The stackable pilaster system supports taller interior layouts when the cabinet design calls for added vertical reach.
- Mounts to cabinet side - Side mounting gives a clear installation reference for cabinet planning before ordering parts and drawer boxes.
Confirm cabinet pilaster system fit
Key specs to confirm: This cabinet pilaster system is listed as 19.6 x .8 and is manufactured as Rev-A-Shelf part 4PILU-20-088-40. Buyers should confirm cabinet interior height, side panel condition, and available width before trimming or stacking the uprights. Because this product is intended for any door/drawer base cabinet, it is important to verify your specific cabinet opening, box layout, and the drawer box dimensions you plan to use. If you need load details, compliance information, or any performance limits, those details should be confirmed with the manufacturer or current technical documentation before purchase.
What's included: Verified listing details identify pilaster uprights only. The product is compatible with Rev-A-Shelf wood drawer boxes, or buyers may provide their own compatible drawer boxes. Right and left brackets are referenced in the product description and should be confirmed against the current package contents if needed for your order.
What to verify before ordering: Confirm cabinet type, side-mount location, required finished height, whether stacking is needed, whether trimming is planned, and whether your selected wood drawer box is compatible with this pilaster upright format.
Compare drawer base cabinet pilaster options
Use a cabinet pilaster system in base cabinets
A drawer base cabinet pilaster is useful when a project needs organized pull-out style storage in a base cabinet that combines a door and drawer layout. In many jobs, the challenge is not finding storage space but fitting hardware into the exact cabinet dimensions already on site. This Rev-A-Shelf pilaster system addresses that issue by giving the installer maple pilaster uprights that can be trimmed both lengthwise and widthwise. That matters when cabinet interiors are not perfectly uniform or when the project includes custom cabinetry.
Another common issue is reaching the required interior height. The product description states that the uprights can be stacked to reach the desired height. For a buyer planning a taller interior arrangement, a stackable pilaster system can reduce the need to shift to a different organizer style. Since the product mounts to the cabinet side, the installer can plan around the cabinet wall rather than relying on floor mounting details that may not suit every build.
This product is also useful when the buyer wants flexibility with drawer boxes. The listing clearly states that these are pilaster uprights only and that they are compatible with wood drawer boxes from Rev-A-Shelf or with buyer-supplied boxes. That wood drawer box compatible format can help a cabinet shop standardize on its own box construction while still using a branded organizer framework. For remodel work, that flexibility can also help when matching existing cabinet interiors or when the buyer already has a preferred drawer box source.
Because this is a door drawer base cabinet organizer component rather than a fully described complete kit, buyers should confirm the exact package contents, drawer box compatibility, and final installed dimensions before ordering. If your project depends on a specific load capacity, extension detail, or code-related requirement, those points are not listed in the verified product data and should be checked with the manufacturer.
Compare maple pilaster uprights with generic options
When comparing maple pilaster uprights to more generic cabinet organizer parts, buyers often look first at material, adjustability, and installation layout. This Rev-A-Shelf cabinet organizer component is clearly identified as natural maple with a semi-gloss finish, which is helpful for projects where the cabinet interior appearance matters as much as basic function. A wood-based organizer component may also better match cabinetry built with wood drawer boxes and wood-faced interiors.
Fit flexibility is another key point. The verified description states that the uprights are trimmable in both directions and can be stacked to reach the desired height. That combination gives buyers more ways to adapt the cabinet pilaster system to the job rather than forcing the cabinet to match a fixed organizer size. For installers, this can simplify planning when cabinet sizes vary across a kitchen or bath project.
The bracket arrangement also supports practical installation planning. Right and left brackets can be used in the front and back for easier installation. Without claiming anything beyond the verified data, that layout indicates a setup intended to help the installer position the uprights more efficiently inside the cabinet. Side mounting is also clearly stated, so buyers can compare this format against other organizer types that may use a different mounting location.
Finally, the product is described as pilaster uprights only. That can be an advantage for buyers who want to choose their own compatible drawer boxes instead of replacing an entire system. It also means the buyer should review the full cabinet layout and confirm all related parts before purchase so the finished organizer matches the intended use.
Ask fit questions before cabinet install
What cabinet type is this pilaster system designed for?
The Rev-A-Shelf pilaster system is designed for any door/drawer base cabinet.
Does this product include drawer boxes?
The Rev-A-Shelf pilaster uprights are listed as pilaster uprights only, so drawer boxes should be sourced separately unless confirmed in current package details.
Can the maple pilaster uprights be trimmed?
The maple pilaster uprights can be trimmed both lengthwise and widthwise for a more custom fit.
Can this cabinet pilaster system be stacked?
The cabinet pilaster system can be stacked to reach the desired height.
Where does this drawer base cabinet pilaster mount?
The drawer base cabinet pilaster mounts to the cabinet side.
Are brackets included for installation?
The product description references right and left brackets that can be used in the front and back, but buyers should confirm exact package contents before ordering.
Will it work with non-Rev-A-Shelf drawer boxes?
The pilaster uprights are described as compatible with Rev-A-Shelf wood drawer boxes, or buyers can provide their own, so compatibility should be checked before purchase.
What dimensions should I verify before ordering?
The pilaster system is listed as 19.6 x .8, and buyers should also verify cabinet interior size, side-mount clearance, and planned drawer box dimensions.
Is load capacity listed for this cabinet organizer?
The Rev-A-Shelf cabinet organizer listing does not provide load capacity in the verified data, so that detail should be confirmed with manufacturer documentation.
What installation guidance should I follow?
The Rev-A-Shelf pilaster system should be installed by following manufacturer installation guidance and local building requirements where applicable.
Order a Rev-A-Shelf cabinet organizer
Rev-A-Shelf cabinet organizer components like this pilaster upright set are a practical fit when you need side-mounted, trimmable storage hardware for a door/drawer base cabinet. Before purchase, confirm the 19.6 x .8 listing size, whether stacking is needed, and which compatible wood drawer box you plan to use. Also verify the exact included components for your order, since the verified description identifies pilaster uprights only. Careful fit checks help make sure the finished cabinet organizer matches your cabinet interior and installation plan.
Confirm maple pilaster uprights before ordering
Maple pilaster uprights are best ordered after you confirm cabinet type, side-mount space, trim requirements, and whether your project will use Rev-A-Shelf wood drawer boxes or another compatible box. This product is built for door/drawer base cabinet use, can be stacked for added height, and is supplied as pilaster uprights only. Reviewing those fit points before purchase helps avoid mismatched parts and keeps installation moving once the cabinet is ready.
