Amerock Appoint cabinet pull 96mm gives cabinets a defined grip point that supports smooth opening and closing on everyday jobs. The pull is part of the Amerock Appoint collection, so its profile keeps a consistent visual line across doors and drawers when multiples are installed. The stated 3-3/4 inch, or 96 mm, center-to-center measurement sets clear hole spacing, which helps plan drilling layouts and replacements without reworking the face. The polished nickel finish creates a bright, reflective surface that reads clean against painted or stained fronts, helping installers deliver a finished look using a single, repeatable style. The pull is identified by manufacturer part number BP36759PN, which ties directly to Amerock specification sheets and job submittals. Amerock Corporation branding connects this pull to a long-running decorative hardware program that supports coordinated selections across a room.
The 3-3/4 inch center-to-center dimension on this Amerock Appoint pull sets the distance between mounting holes, so installers can drill accurately using templates or jigs. The 96 mm metric value matches the same spacing, allowing the pull to drop onto layouts expressed in millimeters without conversion work. The defined center-to-center size supports replacing older pulls that share this spacing, because existing holes can be reused. The polished nickel finish gives a consistent edge line around the fingers, which helps hide minor drill variances visually when hardware is viewed in raking light across a bank of doors.
The Amerock Appoint Series 3-3/4 in center to center polished nickel pull is suited to cabinet faces that accept a 3-3/4 inch or 96 mm hole pattern. The stated center-to-center spacing lets installers align the pull with rail heights or panel breaks while keeping screw points clear of joints. The polished nickel finish features soft golden undertones, allowing it to coordinate with other polished nickel cabinet hardware or bath fittings where a warmer tone than chrome is desired. Because the pull is part of the Appoint collection, it carries the same refined, stately lines onto doors, drawers, and other fronts across a project. The decorative hardware and moldings category placement ties this part to typical cabinet, vanity, and built-in applications where a pull is the primary handhold. The web description notes that Amerock offers styles and finishes to add a finishing touch to a room, and this pull contributes that function when used in runs or grouped layouts.
The 3-3/4 inch, or 96 mm, center-to-center dimension helps maintain consistent spacing from edge to edge, so installers can repeat the same measurement across banks of cabinetry without recalculating. Using a pull with a defined center-to-center dimension also supports the use of shop-built drilling jigs, which can speed production and keep rows aligned on large jobs. The polished nickel finish, described as having a rich luster reminiscent of sterling silver, presents a uniform surface that reads well under both ambient and focused lighting. That consistent reflection helps finished cabinets look even when doors are slightly out of plane. The pull originates from Amerock Corporation, whose decorative and functional cabinet hardware program spans cabinet hardware, bath accessories, decorative hooks, and wall plates, allowing specifiers to tie this single pull into broader design schemes. Identifying the pull by BP36759PN allows clear communication between field installers, purchasing, and designers when confirming the exact Appoint polished nickel part used on a project.
The Amerock BP36759PN pull has a 3-3/4 inch, or 96 mm, center-to-center size, so hole spacing can be laid out or matched precisely on cabinet doors and drawers.
The polished nickel finish has soft golden undertones and a rich luster, so it pairs with similar finishes and gives cabinets a bright, reflective touchpoint on each front.
The Amerock Appoint 3-3/4 inch pull fits cabinet fronts drilled on a 3-3/4 inch or 96 mm center-to-center pattern, aligning with common layouts on doors and drawers.
The defined 96 mm center-to-center spacing lets installers use jigs or templates, which supports consistent hole placement across multiple cabinets on a job.
The Appoint collection is described as refined with stately lines, so this pull brings an enduring, coordinated style to cabinets when used throughout a space.
The BP36759PN part number uniquely identifies this Amerock Appoint polished nickel pull, which helps teams order, track, and match the exact model on repeat work.
The Amerock Appoint cabinet pull 96mm combines a defined 3-3/4 inch center-to-center drilling pattern with a polished nickel finish that carries soft golden undertones. For projects built around this spacing, choosing BP36759PN keeps layouts straightforward and appearance consistent from door to drawer. Wurth Baer Supply connects this Amerock Corporation pull to a broader decorative hardware range, so specifying this model can anchor the look of cabinets, vanities, and built-ins across a room or project run.