Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Appoint appliance pull gives you a defined gripping point for larger doors where an appliance-style pull is preferred. The Amerock Corporation design groups this pull in the Appoint Series, so it presents a coordinated look when matched with related Appoint pieces in the same project. The center to center measurement on this pull is 12 inches, so the mounting holes align on that spread and hold the load along a longer section of the door or panel. That 12 inch length provides a substantial hand grab, which helps when operating tall doors or heavier fronts. The same center to center dimension is 305 mm, which suits layouts dimensioned in metric systems on shop drawings. The Amerock BP54030PN pull uses a polished nickel finish, so the facing surface shows a bright metal tone that reads consistently across multiple pulls on the same run.
This Amerock Appoint appliance pull uses an 12 inch center to center dimension, so both mounting points align on that exact span and define the drilling pattern on the door or panel. That fixed 12 inch spread also means existing bores on replacement work must follow the same center to center distance to use this BP54030PN pull in the same locations. The matching 305 mm center to center measurement gives the identical span in metric units, which connects directly to metric spacing on plans or drilling jigs. The product is identified as an appliance pull, so it is sized to act as a primary grip point on appliance fronts or larger cabinet faces where that 12 inch spread fits the scale of the panel.
The Amerock Appoint appliance pull is categorized under Appliance Pulls, so it is intended for installations where a larger pull suits appliance fronts or tall cabinet doors that need a strong, central grip. The 12 inch center to center dimension means this pull spans a significant portion of the front, which works well on wide or full-height panels that benefit from a long handle. The same center to center measure is specified as 305 mm, so the pull can be planned into cabinets designed in metric without recalculating the mounting distance. This pull is listed under Decorative Hardware & Moldings|Handles and Pulls, which places it in the decorative hardware group commonly used on finished cabinetry and built-ins.
The Amerock Corporation branding on this Appoint Series pull identifies it as part of an established decorative hardware line, which is relevant when coordinating with other Amerock components on a job. The polished nickel finish on the BP54030PN model gives the pull a bright nickel face, so it visually supports polished nickel themes across hinges, smaller handles, or other trim pieces on the same installation. The specific Amerock Appoint Series designation links this appliance pull to that series profile, which helps keep style continuous when you specify matching Appoint handles or knobs on neighboring doors and drawers.
The 12 inch center to center specification on the Amerock BP54030PN pull defines the hole-to-hole distance, which allows consistent drilling from cabinet to cabinet when that same layout is repeated. Labeling the same span as 305 mm provides an exact metric counterpart, which keeps the layout precise on metric-based casework without conversion rounding. The part number BP54030PN directly ties to the polished nickel finish, so when this identifier is specified on orders or drawings, the hardware finish and size match across the entire run.
Classifying this product as an appliance pull in the Appliance Pulls product class signals that it is sized for larger fronts, so the 12 inch center to center layout can be planned at a proportion that looks balanced on tall or wide doors. Placement under Decorative Hardware & Moldings|Handles and Pulls places it among visible hardware components, so its appearance and finish can be coordinated intentionally with other exposed pulls and moldings in the same design. The Amerock Appoint Series name groups this pull with other Appoint pieces, which simplifies maintaining one visual line throughout kitchens, built-ins, or other projects using the same series.
The Amerock Appoint appliance pull has an 12 inch center to center size, so the mounting holes are spaced 12 inches apart for alignment on larger doors or panels.
The Amerock BP54030PN pull lists the same center to center distance as 305 mm, which matches metric cabinet drawings that specify a 305 mm hole spacing.
The BP54030PN model is specified in polished nickel, so the visible surface presents a bright nickel tone that coordinates with other polished nickel hardware.
This Amerock Appoint Series piece is classified as an appliance pull in the Appliance Pulls product class, so it is intended for larger doors and appliance-style fronts.
The pull is part of the Amerock Appoint Series, which means it shares styling with other Appoint handles and pulls for coordinated decorative hardware layouts.
This pull is listed under Decorative Hardware & Moldings|Handles and Pulls, so it is specified as visible decorative hardware for cabinetry and related work.
The Amerock Appoint appliance pull with 12 inch (305 mm) center to center spacing provides a defined hole layout for appliance fronts and large cabinet doors. The polished nickel BP54030PN finish keeps the appearance consistent with other polished nickel hardware selections. Using the Amerock Appoint Series within Decorative Hardware & Moldings|Handles and Pulls lets you match this appliance pull with related Appoint pieces across the same project. For projects calling for a polished nickel appliance pull on an 12 inch or 305 mm spread, this Amerock Corporation model offers a clearly specified option ready to be planned into your hardware schedule.