Amerock Mulino 10-1/16 inch pull is a decorative cabinet pull designed for cabinetry and other woodwork where a 256 mm center-to-center handle is required. This pull provides a consistent 10-1/16 inch (256 mm) hole spacing, which supports straightforward layout on doors and drawers using common drilling jigs or shop templates. The pull is part of the Amerock Mulino collection, so the inviting lines and simple geometry give a unified, contemporary look across a job when used on multiple fronts. Its design blends clean geometry with a split-finish assembled form, which creates a defined visual line that can help align the pull with door and drawer reveals. The pull is categorized under decorative handles and pulls, keeping it squarely in the trim hardware stage of a cabinet project.
The 256 mm center-to-center measurement defines where installers drill mounting holes, allowing repeated use of the same template for multiple fronts. By matching the stated 10-1/16 inch spacing, existing or planned hole layouts can be coordinated across a bank of doors and drawers. The defined length supports layout on wider drawer faces, where longer pulls better span the usable hand grip area. As a decorative handle within Amerock cabinet hardware, this pull fits into standard cabinet installation sequences, typically set after finish work so surfaces stay clean while hardware is aligned. The consistent bar length and fixed hole spacing help maintain straight visual lines when used in rows or stacked vertically on tall cabinet doors.
The Amerock BP36726MBBBZ Mulino pull is specified for cabinet and decorative hardware applications, so it suits kitchen, bath, and built-in cabinetry where a streamlined handle is desired. Its 10-1/16 inch (256 mm) center-to-center dimension suits wider drawers or larger doors, where a longer pull provides more hand contact area across the front. Because the Mulino collection relies on clean geometry, the pull pairs well with flat or slab-style doors, creating straight sight lines that match the hardware profile. The Matte Black and Golden Champagne split-finish design gives a high-contrast look that coordinates with mixed metal themes commonly found around appliances, faucets, and lighting in finished rooms. As a decorative handle and pull under Amerock, it fits within broader hardware sets on a project that use similar modern styling.
The defined 256 mm center-to-center spec allows installers to rely on metric or imperial jigs without adjusting between pieces, which keeps drilling operations consistent across multiple cabinets. The straight, inviting lines of the Mulino profile help visually confirm alignment during install, because the pull's edges run parallel to door and drawer edges. Its split-finish assembled construction places the Matte Black and Golden Champagne finishes in intentional zones, which can serve as visual guides when setting height or spacing relative to panel rails and stiles. The high-contrast finish pairing means the pull remains easy to see against many cabinet colors, supporting accurate placement when working in varied site lighting. As an Amerock decorative cabinet pull, the part number BP36726MBBBZ clearly identifies this specific size and finish combination, which helps maintain uniform results on later matching or expansion work.
The Amerock Mulino 10-1/16 inch pull lines up with 256 mm center-to-center holes, so drilling or existing holes must match that spacing for proper mounting and alignment.
The Amerock BP36726MBBBZ Mulino pull spans 10-1/16 inches, or 256 mm, between mounting centers, which sets the working distance for screw hole placement on doors and drawers.
The pull uses a Matte Black and Golden Champagne split finish, creating a high-contrast look that visually defines the handle on many cabinet finishes during layout and daily use.
The Amerock Mulino 10-1/16 inch pull is classified as decorative cabinet hardware, making it well suited to cabinet, bath, and furniture projects needing coordinated handles and pulls.
The Mulino split-finish design clearly separates Matte Black and Golden Champagne areas, giving installers a visual line that can align with rails, stiles, or drawer edges during installation.
The BP36726MBBBZ part number identifies this specific Amerock Mulino pull with 10-1/16 inch (256 mm) center-to-center spacing and the Matte Black/Golden Champagne finish combination.
The Amerock Mulino 10-1/16 inch pull with 256 mm center-to-center spacing offers a clearly specified drilling pattern for cabinet, bath, and furniture work. Its clean geometry and split Matte Black/Golden Champagne finish support modern layouts where straight lines and visual contrast matter. As part of Amerock decorative cabinet hardware, the BP36726MBBBZ Mulino pull fits naturally into handle selections that prioritize consistent sizing and coordinated style across a project. Choose this pull when a long, defined center-to-center measurement is needed to standardize handle locations on wider drawers and larger cabinet doors.