Amerock Overton 3 inch pull sets a consistent 76 mm center-to-center dimension, which gives cabinet doors and drawers a repeatable drill pattern that aligns cleanly across a run. The pull is part of the Amerock Overton collection, so its ribbonlike forms keep a uniform design language from door to drawer in the same space. The Brushed Matte Black/Satin Nickel split finish combines a dark, textured surface with warm metallic accents, helping the pull coordinate with both dark cabinet faces and stainless or nickel fixtures in the room. This pull is produced by Amerock Corporation, a brand focused on decorative cabinet hardware, so it is designed for use on residential or light commercial cabinetry where appearance and consistent styling matter.
The 3 inch (76 mm) center-to-center dimension on this Amerock Overton pull defines the distance between mounting holes, so installers can layout drill points with a standard 3 inch template or boring jig. Because this dimension is fixed and clearly specified, it supports accurate retrofits on doors or drawers already drilled at 3 inches on center. The pull is designed as decorative cabinet hardware, so mounting is oriented around typical door and drawer front thicknesses found in cabinetry. Using the stated center-to-center spacing across a full bank of fronts keeps each pull visually aligned, which maintains straight visual lines on face frames or frameless cabinet runs.
The Amerock Overton Series 3 inch (76 mm) center-to-center pull is specified as decorative cabinet hardware, positioning it for use on cabinet doors and drawers in kitchens, baths, and other casework. Its ribbonlike forms from the Overton collection create a continuous design theme, so the same pull can be repeated on upper doors, lower bases, and tall pantry fronts without changing visual style. The Brushed Matte Black/Satin Nickel split finish pairs a dark, brushed surface with subtle warm metallic accents, allowing the hardware to sit comfortably against painted cabinets, stained wood, or laminate faces while still relating to nickel faucets or fixtures in the room. Because the center-to-center size is clearly defined at 3 inches (76 mm), this pull suits layouts that already use, or are planned around, that common drilling standard.
The specified 3 inch (76 mm) center-to-center measurement on the Amerock BP37080BMBG10 pull gives installers a predictable mounting reference, so once a single door is laid out, the same spacing can be repeated quickly across a project. The split Brushed Matte Black/Satin Nickel finish creates a high-contrast look that can bridge between dark cabinet surfaces and lighter metal appliances, which reduces the need to alternate hardware finishes from zone to zone. The Overton collection styling with its ribbonlike forms means pulls on doors and drawers share the same visual profile, supporting a cohesive, planned appearance in finished millwork. Because this pull is identified precisely as Amerock part BP37080BMBG10, specifiers can call out that code on drawings or order lists, helping field teams match the exact finish and style during installation or later expansions.
The Amerock Overton 3 inch pull has a 3 inch (76 mm) center-to-center dimension, which defines the hole spacing for drilling cabinet doors and drawers.
The Amerock BP37080BMBG10 pull uses a Brushed Matte Black/Satin Nickel split finish, combining a dark brushed surface with subtle warm nickel accents on the same handle.
The pull is part of the Amerock Overton collection, so its ribbonlike forms match other Overton pieces used on different cabinets in the same project.
The 3 inch (76 mm) center-to-center size matches a common cabinet boring standard, so existing 3 inch drill patterns can accept this pull without changing layouts.
This Amerock Overton pull is designed as decorative cabinet hardware, fitting typical cabinet doors and drawers in kitchens, baths, or similar casework.
The BP37080BMBG10 part number uniquely identifies this Overton 3 inch pull and finish, helping specifiers and installers match the same hardware across projects.
The Amerock Overton Series 3 inch (76 mm) center-to-center pull in Brushed Matte Black/Satin Nickel offers a defined mounting span, a split high-contrast finish, and coordinated collection styling under part number BP37080BMBG10. For cabinet work planned around a 3 inch pull pattern with a consistent decorative look, this Amerock cabinet pull aligns the drill layout, finish pairing, and visual profile across the run.