Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 16 inch over-travel side-mount ball bearing drawer slide from Fulterer, rated 100 lb per pair, with a hold-in anti-rebound detent and a bright zinc finish. It is designed for kitchen, shop, and utility drawers that sit beneath countertop overhangs or inside deep face frames where standard full extension leaves the back of the drawer out of reach.
Standard full-extension slides stop at the cabinet face. When the drawer sits below a countertop overhang or behind a thick face frame, that means the rearmost contents stay partially hidden. The over-travel action on this slide pushes the drawer member past the nominal slide length, giving the drawer that extra clearance needed to clear the obstruction. It is the right choice for kitchen base drawers under stone or laminate countertops, workshop benches with overhanging tops, and any framed-cabinet application where deep face frames eat into the opening. The hold-in anti-rebound detent adds a practical bonus in busy shops and high-traffic kitchens: the drawer stays shut when pushed closed instead of springing back open.
Both the cabinet and drawer members are cold-formed steel, with a bright zinc electroplate that protects against corrosion in normal indoor environments. Zinc is the segment standard for side-mount ball bearing slides — a functional, low-profile finish that disappears inside the cabinet beside the drawer box. This is an indoor slide; it is not rated for wet, exterior, or marine conditions.
Cabinet shops and contractors installing base cabinets under deep countertop overhangs will find the over-travel action solves a common problem without requiring a special-order product. Homeowners retrofitting kitchen drawers that were originally fitted with standard-travel slides can use this as a direct drop-in if the existing clearance and length match. The 1/2 inch per-side clearance and non-handed format keep installation straightforward: build the drawer box 1 inch narrower than the opening, mount one slide per side, and no left/right distinction is needed. For face-frame cabinets, rear mounting brackets are required to support the back of the slide — those are sold separately and are series-specific, so confirm compatibility before ordering.
No. Sixteen inches is the closed slide length, not the travel distance. Over-travel means the drawer member extends past that nominal length, pushing the drawer beyond the cabinet face. The exact over-travel distance is not stated in the source data for this SKU — measure your specific overhang clearance requirement before selecting a length.
It is a mechanical catch that holds the drawer in the closed position and stops it from bouncing back open after a firm close. There is no spring assist and no damping — the drawer simply stays put until you pull it open. It does not pull the drawer shut on its own.
Confirm the sold-as unit on the product listing before ordering. Most Fulterer FR-series slides in this catalog are sold as pairs, but verify the unit shown at checkout matches your drawer count.
No. This slide is non-handed — both pieces in the pair are identical and fit either side of the drawer without modification.
Yes, but you will need rear mounting brackets to support the back of the slide, since the cabinet side is set back from the face frame. Brackets for this series are sold separately — use Fulterer-compatible brackets matched to this slide's length and style.
When a countertop overhang or deep face frame is cutting off access to the back of the drawer, this 16 inch over-travel slide solves the problem at the standard 100 lb class — no heavy-duty upgrade needed, and no special clearance beyond the 1/2 inch per side that fits most existing layouts.
Sold In: 15 Set
