
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
807 base cabinet hanging bracket describes a left hand steel bracket designed as part of a wall hanging rail system for base cabinets. The screw mount design ties the cabinet directly to the structure, which supports solid cabinet anchoring in wall-mounted installations. The 10mm shoulder socket engages with a properly matched wall plate, creating a defined connection point that helps position the cabinet consistently along the rail. As part of a wall hanging rail system category, this bracket works within an organized installation layout rather than as a stand-alone fastener, which helps installers keep cabinet runs straight. A 528 lbs. weight capacity per pair means the bracket system is intended to support substantial base cabinet loads when used as designed, giving installers a clear reference for planning cabinet spacing and loading in typical woodworking projects.
The hanging bracket installs as a screw mount component, so the bracket is attached using screws through the body into the cabinet or supporting structure, providing a firm mechanical connection before it is engaged with the wall plate. Depth adjustment range of 19mm lets installers move the cabinet in or out relative to the wall, helping align the cabinet face with adjacent units or finished surfaces. Height adjustment range of 22mm allows the bracket position to shift vertically, which supports leveling cabinet runs after the brackets are engaged on the rail. Side-to-side adjustment range of 2mm adds a small horizontal correction window, letting installers fine-tune gaps between cabinets or align doors and drawer fronts along a straight line.
This hanging bracket is specified for base cabinets, so it is intended to support cabinets located at the lower run of a wall hanging rail system rather than upper wall units. The part is identified as a wall hanging rail system component, so it functions together with the referenced anti-drop wall plate to create the load path from cabinet into the wall. Screw mount installation means the bracket is fastened directly to the cabinet or structural elements with screws, forming a fixed mounting point before the cabinet is set onto the wall plate. The 10mm shoulder socket dimension indicates the interface that engages with the anti-drop wall plate, helping situate the cabinet on the wall rail at a defined horizontal position.
The bracket works with a 120mm x 120mm or 60mm x 70mm anti-drop wall plate, letting installers choose between those plate sizes while maintaining compatibility with the 10mm shoulder socket. That pairing defines how the cabinet connects to the wall, supporting predictable bracket placement across different project layouts. The depth adjustment range of 19mm enables the cabinet face to be brought flush with fronts of nearby cabinets or countertops once the bracket is hanging on the rail. The 22mm height adjustment range is useful for leveling cabinet tops along a run when floor or wall conditions vary, while the 2mm side-to-side adjustment supports tightening up reveals between cabinets. The 528 lbs. weight capacity per pair indicates how the bracket and matched wall plate participate in the overall support strategy.
The 807 base cabinet shoulder mount hanging bracket is specified for base cabinets, so it supports lower cabinet runs in wall hanging rail system installations.
The 807 bracket is left hand, identifying it for the left side of a base cabinet, which helps pair it with a corresponding right side component in a rail system layout.
The hanging bracket uses a screw mount configuration, so it is secured by driving screws through the bracket into the cabinet or structure during installation.
The bracket provides 19mm depth, 22mm height, and 2mm side-to-side adjustment, allowing installers to fine-tune cabinet position after engaging the wall plate.
The bracket is specified to install with 120mm x 120mm or 60mm x 70mm anti-drop wall plates, so it can engage either plate size using the 10mm shoulder socket.
The 528 lbs. weight capacity per pair states the load rating for two brackets used together, guiding cabinet load planning within a wall hanging rail system.
This left hand steel hanging bracket from Peter Meier, Inc. is built as a base cabinet component within a wall hanging rail system, so it fits projects that use anti-drop wall plates and need screw-mounted support. The 10mm shoulder socket and specified wall plate sizes define a repeatable connection point, helping cabinet runs line up cleanly. With 19mm depth, 22mm height, and 2mm side-to-side adjustment, the bracket supports practical on-site tuning of cabinet position. The 528 lbs. weight capacity per pair provides a numeric reference when planning base cabinet loading. For wall-mounted base cabinet work that matches these dimensions and adjustments, this 807 base cabinet shoulder mount hanging bracket offers a focused solution.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | CM807-01-SX Mfr# 807-01-SX | Left-Hand Cover Cap for 807 Hanging Bracket, White (400/Box) | ||||
Sold in: 1 Each | CM807-02-SX Mfr# 807-02-SX | Left-Hand Cover Cap for 807 Hanging Bracket, Black (400/Box) | ||||
Sold in: 1 Each | CM897-AS-Z1 Mfr# 897-AS-Z1 | 60mm x 70mm 807 Anti-Drop Wall Plate, Steel (200/Box) | ||||
Sold in: 1 Each | CM897-AS-Z2 Mfr# 897-AS-Z2 | 120mm x 120mm 807 Anti-Drop Wall Plate, Steel (100/Box) | ||||
Sold in: 1 Each | CM807-MA-P2 Mfr# 807-MA-P2 | Drill Template for 807 Hanging Bracket | ||||
Sold in: 1 Each | CM807-55-SD Mfr# 807-55-SD | 22-3/4" Pozi Drive Screw Driver for 807 Brackets |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | CM807-00-AP Mfr# 807-00-AP | Bracket Insertion Tool for 807 Dowel Mount | ||||
Sold in: 1 Each | CM807-VP-DX Mfr# 807-VP-DX | 807 Base Cabinet Shoulder Mount Hanging Bracket, Right Hand, Steel (100/Box) |