Kreg MortiseMate 6 mm Mortising Cutter is a carbide-tipped mortising drill bit designed for creating precise, clean mortises that accept Kreg 6 mm tenons, so joints seat accurately and stay consistent from workpiece to workpiece. The cutter is only for use with the Kreg MortiseMate Loose Tenon Jig, which means its geometry and size are matched to that jig for predictable fit. The bit works with any drill, allowing use in a range of shop or jobsite drilling setups while keeping the same mortise standard. A stainless steel stop collar controls depth, so mortises stop where planned and repeated cuts match without constant measuring.
This mortising cutter works with any drill, so users can pair it with the drill they rely on while still using the Kreg MortiseMate Loose Tenon Jig to guide the cut. The stainless steel stop collar installs on the cutter to govern drilling depth, so once the collar is positioned, each mortise stops consistently at the same depth. Laser-etched markings on the cutter give visual references for mortise depth, so users can align the collar to a specific mark instead of relying on separate measuring tools. This combination of drill compatibility, visual depth scale, and physical stop collar supports repeatable mortising in cabinet, furniture, or general woodworking loose tenon work that uses 6 mm tenons.
This KLTJC-M06 mortising cutter is part of the Kreg MortiseMate system and is only for use with the Kreg MortiseMate Loose Tenon Jig, so it fits workflows that already rely on that jig for layout and guidance. Because the cutter creates perfectly sized mortises for Kreg 6 mm tenons, it suits joinery where 6 mm loose tenons are specified as the joint connector. The bit works with any drill, so it adapts to corded or cordless drills commonly used in cabinet shops or on-site installations while the jig maintains alignment. Its carbide tipped construction is rated to withstand over 5,000 joints (or more, depending on material), so it fits repetitive mortising tasks where long tool life supports continued production on similar stock without frequent bit changeouts.
The carbide tipped cutting edges are engineered for durability across thousands of joints, so cutting performance stays consistent over extended use and helps keep mortise dimensions stable. Spiral flutes are designed to create precise, clean cuts, so each pass clears material efficiently and leaves mortise walls ready to accept 6 mm loose tenons without extra refining steps. Laser-etched markings along the cutter body support quick, precise mortise depth adjustment, so the stainless steel stop collar can be aligned to a known depth mark and then locked for a series of matching cuts. Working only with the Kreg MortiseMate Loose Tenon Jig means the jig positions the cutter and this bit defines mortise size, so together they create strong and accurate joints every time described by the manufacturer. This combination of controlled depth, clean cutting, and system-matched sizing supports repeatable joinery results with reduced chance of variation from mortise to mortise.
The Kreg MortiseMate 6 mm Mortising Cutter works with any drill, so it can be driven by the drill already used in the shop or on site while the jig guides location.
The cutter is only for use with the Kreg MortiseMate Loose Tenon Jig, so its size and design match that jig for guided mortise cutting in 6 mm tenon joinery.
The mortises created by this cutter are perfectly sized for Kreg 6 mm tenons, so loose tenons fit the cavity as intended for strong, accurate joints.
The carbide tipped bit is stated to withstand over 5,000 joints, or more depending on material, so it supports extended use before performance impacts scheduling.
The cutter uses a stainless steel stop collar and laser-etched depth markings, so users can set and repeat mortise depth directly on the bit body.
The spiral flutes are described as creating precise, clean cuts, so mortise walls come off the bit ready to accept loose tenons with minimal cleanup.
The Kreg MortiseMate 6 mm Mortising Cutter, part number KLTJC-M06, is designed for use with the Kreg MortiseMate Loose Tenon Jig and for Kreg 6 mm tenons, so it fits workflows built around that system. Its carbide tipped construction withstands over 5,000 joints, or more depending on material, so it supports ongoing production in cabinet and furniture work that uses repetitive loose tenon joints. Laser-etched depth markings, spiral flutes, and a stainless steel stop collar work together to control depth and cut quality, so joints stay strong and accurate across repeated setups when using any drill with the MortiseMate jig.
Sold In: 1 Each