Kreg MortiseMate™ 8 mm Loose Tenons, KT0822-150-50 - 50 ct

Kreg MortiseMate 8 Mm Loose Tenons For Joinery

Kreg MortiseMate 8 mm Loose Tenons are milled from all-natural, solid hardwood, which supports strong, stable loose tenon joints in woodworking projects. Each tenon is sized at 8 mm x 22 mm x 1.5 inches, so it matches 8 mm mortising cutters and mortises in that range for consistent fit across a run of parts. The tenons are fluted along their length, which holds glue on the surface and lets excess glue move into the grooves during assembly, helping joints seat fully. Each piece is approximately 1/16 inch shorter than the nominal length, which leaves space inside the mortise for glue and squeeze-out so the joint pulls tight. These loose tenons are described as perfect for use in furniture, cabinetmaking, and casing, which means they suit common shop projects across multiple assemblies.

Loose Tenon Details That Support Daily Work

• The solid hardwood construction provides strength and stability in loose tenon joinery, which helps joints handle everyday loads in furniture, cabinetmaking, and casing projects without relying on metal fasteners.
• The 8 mm x 22 mm x 1.5 inch size is designed for a precise fit with 8 mm diameter mortising cutters, so matching mortises can be produced quickly using standard 8 mm tooling for repetitive, predictable joinery.
• The fluted design retains glue along the tenon and channels excess glue into the grooves during clamping, helping the joint draw together fully instead of hydraulic locking against a smooth surface.
• The tenons are approximately 1/16 inch shorter than the nominal length, creating an internal pocket in the mortise so glue and squeeze-out have room, which supports tight shoulders without forcing parts apart.
• The resealable container described for these tenons reduces expansion and shrinkage of the hardwood pieces, which helps maintain consistent fit in precisely cut 8 mm mortises over time in the shop environment.

Joinery Fit For 8 Mm Mortises And Cutters

These Kreg MortiseMate 8 mm Loose Tenons are described as compatible with 8 mm mortises cut with the Kreg MortiseMate Loose Tenon Jig, so they tie directly into that jig-based workflow for loose tenon joinery. The design for precise fit with 8 mm diameter mortising cutters means mortises created with those cutters can accept these tenons with minimal hand fitting, which helps keep assembly times predictable. Because each tenon is slightly shorter than the nominal length, glue space within the mortise is built into the system, helping parts pull tight when clamped. The fluted hardwood surface presents glue-friendly faces inside the joint, which supports bond quality when the tenon is seated in matching 8 mm mortises.

Using These Tenons In Cabinet And Furniture Builds

Where Kreg 8 Mm Loose Tenons Are Applied

Kreg MortiseMate 8 mm Loose Tenons are identified as perfect for use in furniture, cabinetmaking, casing, and more, so they serve a range of interior woodworking assemblies where loose tenon joinery is preferred. In furniture builds, the solid hardwood material supports structural joints such as leg-to-rail or frame connections that depend on wood-to-wood strength. In cabinetmaking, the 8 mm by 22 mm profile works with appropriately sized mortises to join cabinet components such as face frames or case parts. For casing work, the same 8 mm mortise approach can tie trim elements together, relying on the tenons to align parts. Because the tenons are compatible with 8 mm mortises cut using the Kreg MortiseMate Loose Tenon Jig, they integrate into that jig system for repeatable hole placement in these applications.

Details That Help Repeatable Loose Tenon Results

The fact that these loose tenons are designed for a precise fit with 8 mm diameter mortising cutters means that once mortises are cut with those cutters, the tenons can be used repeatedly without custom fitting, helping runs of parts match across a project. The consistent 8 mm x 22 mm x 1.5 inch dimensions give a known joint size, which aids planning mortise depth and layout around edges and ends of workpieces. The fluted hardwood surfaces not only hold glue but also let air and excess glue escape along the grooves, which supports fully seated joints during clamping and reduces the chance of joints stopping short. Their approximate 1/16 inch shorter length than nominal establishes an internal glue reservoir in the mortise, letting tenons travel to full depth without hydraulic resistance. The resealable container, which reduces expansion and shrinkage, helps preserve that consistent fit from the first tenon to the last in environments where humidity can change, supporting predictable assembly behavior job after job.

Common Questions About Kreg MortiseMate Loose Tenons

Select Kreg Loose Tenons For 8 Mm Mortises

Kreg MortiseMate 8 mm Loose Tenons give a defined 8 mm x 22 mm x 1.5 inch hardwood element for loose tenon joinery, so joints can be planned around a known size. Their design for precise fit with 8 mm diameter mortising cutters supports efficient production of matching mortises. The fluted, slightly shorter tenon length provides practical glue management inside the mortise, which helps joints pull tight in service. For furniture, cabinetmaking, casing, and related work using the Kreg MortiseMate Loose Tenon Jig or other 8 mm mortising cutters, these tenons offer a matched component for that joinery approach.