Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Salice F70 is an 18 inch full-extension undermount slide with integrated soft-close, rated 170 lb per pair and engineered for face-frame cabinet construction. It mounts concealed beneath the drawer box, delivering quiet, damped closing on a face-frame cabinet without compromise on capacity.
Face-frame cabinetry is the default construction style in American kitchens, and most undermount slides require extra thought to mount correctly in it. The F70 face-frame version is purpose-built for this application, so it installs cleanly without improvised workarounds. At 170 lb per pair, it handles the jobs that turn away standard undermounts: a deep pots-and-pans drawer loaded with cast iron, a utility base drawer carrying tools or supplies, or a large waste pull-out where weight adds up fast. The full-extension travel means nothing stays buried at the back of the box.
Steel construction gives the F70 the structural backbone its 170 lb rating demands. The zinc finish protects the slide through everyday indoor service and keeps the hardware looking clean in the cabinet interior. Because the slide runs concealed beneath the drawer box, the zinc finish is functional rather than decorative — what matters is durability over the long cycle count of a working kitchen or shop drawer.
Cabinet shops building traditional face-frame kitchens and bath vanities will find the F70 face-frame model a natural fit wherever the drawer content is heavy or the client expects full rear access. Custom builders working on pantry pull-outs, heavy-duty base drawers, or oversize storage applications will appreciate the 170 lb headroom without stepping up to a separate product category. The 1/2 to 5/8 inch side-thickness range covers dovetailed hardwood boxes and standard plywood construction equally well.
Yes. In face-frame cabinets the rear of the slide needs support behind the frame. Use the matching Salice F70 face-frame rear mounting brackets — these are series-specific and do not interchange with brackets from other brands or slide lines.
Per pair, as undermount load ratings are stated throughout this segment. One drawer installation uses one pair — two slides carrying the load together.
Salice F70 front locking devices are series-specific accessories. Confirm whether this SKU ships with locking devices or whether they need to be ordered separately before building the drawer box.
Yes. The drawer box must be built to Salice's published specification for the F70 series: 18 inch nominal length, the correct box width for the required side clearance, bottom recess, rear notch, and drilling for the locking devices. An off-spec box will not seat correctly on the slides.
Yes. The F70 line includes a separate push-to-open model for handle-less fronts. This SKU is the soft-close version — damped closing on a pulled front, not touch-eject. Choose the push-to-open model if handle-less operation is the priority.
For face-frame cabinetry where the drawer content is genuinely heavy, the F70 soft-close undermount delivers the capacity and the concealed, damped close that the job calls for — without asking you to step outside the face-frame construction standard you already work in.
Sold In: 1 Set
