Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Series PVC edgebanding TA L586 Natural Affinity 1-3/4 x 1mm gives panel edges a defined finish that matches its TA L586 Natural Affinity design, so exposed board edges present as a continuous surface on completed work. This edge banding is identified as Pro-Tek Edgebanding Ulc TN1-3/4X1MM-L586, which provides a consistent reference when matching to existing jobs or shop standards. The 1-3/4 inch width allows coverage of common panel thicknesses with room for trimming, helping installers achieve flush edges without exposing core material. A 1mm thickness offers a substantial edge profile that stands up to routine shop handling during cutting, trimming, and detailing. As a PVC product in the Edgebanding & Surfacing category, it works within typical cabinet and casework environments where durable, easily machined edging supports repeatable fabrication.
This edge banding is specified at 1-3/4 inches wide, giving installers margin to align the strip slightly proud of the panel before trimming, which reduces the impact of small placement shifts. The 1mm thickness offers an edge that responds predictably to typical edge-trimming and scraping passes, so installers can dial in their tooling for repeat runs without reworking every panel. Because it is categorized as PVC Edgebanding & Surfacing, it fits into standard cabinet and furniture production setups where similar PVC products run through edge banders, trimmers, and finishing stations in a familiar sequence.
This product sits in the Edge Banding class under Edgebanding & Surfacing, aligning it with cabinet, furniture, and casework applications where raw panel edges need a finished face. The TA L586 Natural Affinity reference connects the edge visually to matching surfacing designs, so shops working with that specific tone can carry the look across doors, gables, and shelves. Sized at 1-3/4 x 1mm, it suits work where standard panel thicknesses need full edge coverage and a defined profile, such as vertical cabinet sides and exposed shelf fronts. The Pro-Tek Edgebanding Ulc TN1-3/4X1MM-L586 designation helps production teams call out the exact edgebanding required on cut lists, supporting consistent material pulls for repeated builds.
The combination of 1-3/4 inch width and 1mm thickness gives this PVC edge banding enough material for controlled trimming and finishing, which is important when edges must align flush across multiple doors or panels. The Pro Value Series brand identity helps procurement and shop leads track this edge banding as part of a defined family, reducing variation when reordering for follow-up jobs. The TA L586 Natural Affinity label ties the product directly to a named appearance, which matters when multiple similar tones are stocked and installers need the correct visual match. Having a specific manufacturer part number, WUX11849-5 1-3/4X1MM, lets production documents and inventory systems reference the same item, helping keep edging consistent from sample to final install. Together, these details support cleaner panel lines and more predictable results on cabinet and surfacing projects.
TA L586 Natural Affinity 1-3/4 x 1mm is a Pro Value Series PVC edge banding, so it is used to finish and protect exposed panel edges in cabinet and surfacing work.
The 1-3/4 inch width provides extra coverage beyond typical panel thickness, allowing slight overhang for trimming so the substrate edge stays fully covered after machining.
The 1mm thickness creates a substantial PVC edge profile, giving enough material for trimmers and scrapers to work while maintaining a solid-looking edge on cabinets and panels.
This edge banding is identified as Pro-Tek Edgebanding Ulc TN1-3/4X1MM-L586 and by part number WUX11849-5 1-3/4X1MM, which supports accurate material calls on job documents.
The TA L586 Natural Affinity designation links the edge banding to a specific appearance, helping match banded edges to panels that share the same design reference.
This PVC edge banding belongs to the Edgebanding & Surfacing category, fitting into standard cabinet and casework workflows using common edge banding and trimming equipment.
The TA L586 Natural Affinity 1-3/4 x 1mm Pro Value Series PVC edge banding offers a defined way to finish exposed panel edges when projects call for this specific design reference. By using the Pro-Tek Edgebanding Ulc TN1-3/4X1MM-L586 identification and manufacturer part number WUX11849-5 1-3/4X1MM, shops can align ordering, inventory, and production notes around one clearly defined edging choice. For work centered on that TA L586 Natural Affinity look, this edge banding provides the matching format needed to carry the design across cabinet and surfacing components.
Sold In: 300 Lineal Ft