NOTE: As of 4/13/26, InnovaShelf's prefix has changed from IS to RS. This part number has changed from IST-LOC-1510-14W to RST-LOC-1510-14.

T-LOC-1510 Floating Bracket For Wood Stud Shelves

T-LOC-1510 14" Floating Shelf Bracket for Wood Stud is a concealed support system from InnovaShelf designed for floating shelves in wood substrates. The patented T-LOC system utilizes a specially designed slotted base plate that slides onto the screws, allowing precise adjustability at the wall so the installer can fine-tune level without re-drilling. Brackets and arms are crafted from high quality materials for maximum strength and durability, so the support stays stable under load in typical closet, garage, or room storage use. The bracket is designed to be installed into a wood substrate, aligning with standard stud wall construction and typical shop materials. Shelf is secured to bracket with self-tapping trim screws, tying the hollow shelf structure back to the arms for a rigid, concealed connection that keeps the installation clean and streamlined.

Key T-LOC Bracket Details For Real Jobs

• The patented leveling system with a slotted base plate slides onto the screws, which gives side-to-side and minor vertical adjustability so the shelf can sit level even when screw placement or stud faces vary.
• Brackets and arms are crafted from high quality materials for maximum strength, which supports demanding closet, garage, or utility shelving applications where load capacity and long-term performance are critical.
• The design for installation into a wood substrate works with wood studs or plywood backers, integrating smoothly into common framing or cabinet construction practices in woodworking and finish carpentry.
• The bracket is designed for a hollow shelf, so the arms slide inside the void, keeping the support invisible while distributing the load within the shelf skin for a stable, finished appearance.
• The shelf is secured to the bracket with self-tapping trim screws, which bite into the shelf material without pre-tapping and lock the assembly together to reduce movement during everyday use or loading.
• The bracket has a rated capacity of 250 lb, so a properly constructed hollow shelf and wood substrate can support substantial storage weight in closets, garages, or general room shelving layouts.

Wood Substrate Mounting And Adjustment Use

The T-LOC-1510-14 floating shelf bracket is designed to be installed into a wood substrate, so crews can fasten through the slotted base plate directly into wood studs or structural wood panels. The specially designed slotted base plate slides onto the screws, allowing adjustability after the screws are set so leveling becomes a fine-tuning step rather than a trial-and-error drilling process. Once the base plate is locked in position and level, the bracket arms project to support a hollow shelf, providing a concealed structure for the shelf body. Self-tapping trim screws then secure the shelf to the bracket, which ties the shelf firmly to the arms and helps resist sagging or racking when the shelf is loaded.

Using This InnovaShelf Bracket In Projects

Applications For Hollow Floating Wood Shelves

This InnovaShelf floating shelf bracket is designed for a hollow shelf, which aligns with typical shop-built floating shelves that slide over projecting arms. The 14" length provides deep engagement into the shelf cavity, spreading the 250 lb rated capacity across a larger internal area so the shelf can carry storage loads when built appropriately. Because it is designed to be installed into a wood substrate, the bracket ties directly into wood studs or wood backers behind finished walls, fitting common layouts in closets, garages, and living spaces. The patented T-LOC system with its slotted base plate supports floating shelf layouts where visual clean lines are important, keeping support hidden while maintaining structural performance.

Leveling, Strength, And Long-Term Alignment

The T-LOC system utilizes a specially designed slotted base plate that slides onto the screws, giving installers adjustability after initial fastening so they can bring multiple brackets into plane and keep long runs of shelving straight. This adjustability means small variations in stud placement or screw angle can be corrected at the plate, reducing rework. Brackets and arms are crafted from high quality materials for maximum strength and durability, which supports the 250 lb capacity rating and helps the installation stay true over time as loads change. Shelf connection with self-tapping trim screws links the hollow shelf back to the arms, creating a unified structure that resists twisting or shifting as the shelf is used in day-to-day storage.

Installer Questions About T-LOC-1510 Floating Bracket

Selecting This Bracket For Floating Wood Shelves

The T-LOC-1510 14" Floating Shelf Bracket for Wood Stud pairs a patented T-LOC leveling system with high quality materials and a 250 lb capacity, giving installers a concealed support option for hollow shelves on wood substrates. The slotted base plate that slides onto the screws supports on-the-wall adjustment, while self-tapping trim screws secure the shelf to the arms for a rigid connection. For floating shelves built around a hollow design and anchored to wood, this InnovaShelf bracket provides a practical, concealed structure ready to integrate into closet, garage, and general storage layouts.