Innovashelf T-LOC Floating Shelf Brackets, 200 lb Weight Rating, 1-1/2" X 3/4" X 6", T-LOC-1575-06
Description
NOTE: As of 4/13/26, InnovaShelf's prefix has changed from IS to RS. This part number has changed from IST-LOC-1575-06W to RST-LOC-1575-06.
Innovashelf T-LOC Floating Shelf Brackets For Heavy Use
Innovashelf T-LOC Floating Shelf Brackets provide a concealed support solution for floating shelves in shelf, closet, and garage organization projects, so installers can design clean-looking storage while relying on a defined bracket format. The T-LOC series identity ties this bracket to a specific engineered family, helping shops standardize layouts across multiple installs. A 200 lb weight rating defines the load capacity for each bracket, guiding how these brackets are applied in heavier-duty shelf runs. The 1-1/2 inch by 3/4 inch by 6 inch size establishes the bracket dimensions, which influences how shelves are drilled, routed, or bored to accept this component. As part of the floating shelves and concealed brackets product class, this bracket works as a hidden structural element, letting the visible shelf surface stay uninterrupted. The InnovaShelf brand signals a dedicated line focused on floating shelf brackets and related support solutions.
Key T-LOC Bracket Details That Support Projects
- The T-LOC series designation defines this bracket as part of Innovashelf T-LOC Floating Shelf Brackets, helping shops match it with other T-LOC components and plan repeatable floating shelf details.
- A 200 lb weight rating specifies the designed load capacity per bracket, so installers can plan shelf spans and support counts around a known rating when laying out storage or display runs.
- The 1-1/2 inch measurement defines one primary bracket dimension, which affects how deeply the shelf material must accept the bracket to keep the support fully concealed behind the shelf face.
- The 3/4 inch dimension sets another bracket thickness or height factor, guiding how tight the bore or slot should be when machining shelves for a snug, controlled fit over the support.
- The 6 inch length establishes how far the bracket can project into the shelf, which matters for resisting bending under the 200 lb rating and for deciding shelf depth in closets or garages.
Dimensional Details That Influence Shelf Layout
The 1-1/2 inch by 3/4 inch by 6 inch size of the T-LOC-1575-06 shelf bracket defines a fixed geometry that directly affects layout and machining steps. The 6 inch length determines how far into the shelf the support extends, which influences both shelf depth choices and the leverage against wall mounting points. The 1-1/2 inch measurement contributes to how much material surrounds the bracket inside the shelf, affecting how installers position bores relative to front and back edges. The 3/4 inch dimension impacts the width or thickness of the pocket or bore, which guides bit or cutter selection during fabrication. By working from these known dimensions, shops can develop templates and jigs that repeat the same concealed bracket positioning across multiple floating shelves.
Using The T-LOC-1575-06 Bracket In Real Projects
Where This T-LOC-1575-06 Shelf Bracket Fits Best
The Innovashelf T-LOC Floating Shelf Brackets sit within the Shelf, Closet & Garage Organization category, so they align well with storage projects that call for floating shelves rather than visible standards. As part of the floating shelves and concealed brackets product class, each T-LOC-1575-06 bracket acts as the hidden structural core inside a shelf. The 6 inch length suits shelf designs where a concealed arm can extend several inches into the material, giving room for load transfer while keeping the support out of sight. The 200 lb weight rating gives this bracket a defined role in heavier-use storage, such as deeper closet shelves or garage applications that need a specific load figure.
Why The T-LOC Series Details Matter For Results
The T-LOC series labeling on the T-LOC-1575-06 shelf bracket groups it with a known Innovashelf floating shelf bracket family, which helps installers treat it as a repeatable component in shop standards. Because the 1-1/2 inch by 3/4 inch by 6 inch dimensions are fixed, shops can design boring patterns, routing setups, or CNC programs around this single configuration and reuse them across multiple runs. The 200 lb weight rating gives designers a specific value to factor into bracket spacing and shelf width, helping align the number of supports with anticipated loads. With a defined manufacturer part number, T-LOC-1575-06, reordering the same bracket remains straightforward for ongoing or phased projects that rely on consistent bracket geometry.
Practical Questions About Innovashelf T-LOC Shelf Brackets
What type of product is the T-LOC-1575-06 bracket?
The T-LOC-1575-06 is an Innovashelf T-LOC Floating Shelf Bracket, so it functions as a concealed support element within the floating shelves and concealed brackets product class.
How does the 200 lb weight rating affect shelf design?
The 200 lb weight rating defines the load capacity for each bracket, so designers can size shelf spans and choose bracket counts around that specific rating.
What do the 1-1/2 x 3/4 x 6 inch dimensions refer to?
The 1-1/2 inch by 3/4 inch by 6 inch dimensions describe the bracket size, guiding how deep and wide shelves are machined to house the concealed support.
Where is this bracket typically used in projects?
This bracket is in the Shelf, Closet & Garage Organization category, so it aligns with floating shelf projects in storage-focused spaces.
What does the T-LOC series designation indicate?
The T-LOC series designation identifies the bracket as part of Innovashelf T-LOC Floating Shelf Brackets, supporting standardization on a specific floating shelf system.
How does the manufacturer part number help workflows?
The manufacturer part number T-LOC-1575-06 provides a precise reference, simplifying ordering, job documentation, and repeat use of the same bracket geometry.
Select The T-LOC-1575-06 For Defined Shelf Support
The Innovashelf T-LOC-1575-06 floating shelf bracket gives shops a clearly specified component, combining a T-LOC series designation, a 200 lb weight rating, and 1-1/2 inch by 3/4 inch by 6 inch dimensions. Those details help align design decisions, machining steps, and layout choices around a repeatable concealed support for Shelf, Closet & Garage Organization projects. Selecting this part number ties each floating shelf run to a consistent InnovaShelf bracket format that can be documented and reused on future jobs.