NOTE: As of 4/13/26, InnovaShelf's prefix has changed from IS to RS. This part number has changed from ISTBR-LOC-1762-08 to RSTBR-LOC-1762-08.

TBR-LOC-1762 8" Floating Shelf Bracket For Solid Wood

TBR-LOC-1762 8" Floating Shelf Bracket is an InnovaShelf Timber-LOC concealed support designed for floating shelves where the hardware stays hidden but the load rating matters. The bracket is classified under floating shelves and concealed brackets, so it is built to support shelving while staying out of sight in finished work. A 200 lb capacity lets the bracket carry substantial weight when properly integrated into the shelf design, which is important on closet and garage organization projects that see heavier loads. The Timber-LOC system uses high quality materials for the bracket and arms, giving the assembly strength that suits demanding woodworking jobs. This bracket is designed for use with a solid wood shelf, aligning with common shop-built shelves. It is also designed to be installed into a wood substrate, matching typical wall framing or cleat construction found in professional installations.

Key Timber-LOC Details That Support Shelf Projects

• The Timber-LOC bracket offers up-down adjustment, allowing the installer to fine-tune shelf height on the support arms so the finished shelf can sit level along the wall.
• Sideways adjustment is built into the Timber-LOC design, letting the bracket be shifted laterally on its arms to align a solid wood shelf with adjacent cabinets or walls.
• Brackets and arms are crafted from high quality materials, providing strength that supports the stated 200 lb capacity in closet, garage, or general storage applications.
• The bracket is categorized under floating shelves and concealed brackets, which keeps the support hidden inside the solid wood shelf for a clean, hardware-free appearance.
• The system is designed for a solid wood shelf, matching common shop-built shelf blanks and helping the installer work with familiar materials and machining methods.
• Design for mounting into a wood substrate fits standard framing or blocking, so the installer can fasten into structural wood rather than non-structural surfaces.

Floating Shelf Bracket Fit And Installation Role

The Timber-LOC floating shelf bracket is designed to be installed into a wood substrate, so it ties directly into structural wood such as studs or blocking during layout. This installation approach helps the bracket transfer the 200 lb load rating into the structure, which matters when the shelf will carry heavier stored items. The bracket is intended for a solid wood shelf, so the installer can bore and rout into solid stock to receive the Timber-LOC arms without exposing hardware. Up-down adjustment in the bracket lets the shelf position be tuned vertically after mounting, which reduces the need to recut or shim shelves to correct minor alignment issues. Sideways adjustment allows the arms to shift laterally, giving more freedom to align the solid wood shelf with walls or adjacent components.

Using Timber-LOC Brackets In Real Installations

Where This Floating Shelf Bracket Performs Best

The Timber-LOC floating shelf bracket is suited to shelf, closet, and garage organization applications, where support strength and concealed hardware are both important. A 200 lb capacity supports heavier storage loads in these areas, allowing a single solid wood shelf to handle substantial weight in service. Because the bracket fits into the floating shelves and concealed brackets class, it is designed to sit inside the shelf body rather than under it, leaving the solid wood shelf face and underside clean for a finished look. The need for a solid wood shelf pairs well with shop-built shelving that uses hardwood or softwood boards, since these materials can be drilled to accept the Timber-LOC arms while maintaining strength around the bores. Design for installation into a wood substrate aligns with wall framing, ledger boards, or other wood-based supports often used in organization systems.

Adjustment Features That Support Precise Results

The Timber-LOC floating shelf bracket uses up-down adjustment so the installer can raise or lower the shelf position on the bracket arms after fastening into the wood substrate, which helps bring multiple shelves into the same plane across a run. This vertical adjustment reduces rework when wall conditions are uneven, since the shelf can be tuned on the supports instead of altering the mounting surface. Sideways adjustment built into the Timber-LOC design lets the bracket be shifted laterally relative to the solid wood shelf, so the shelf edge can be aligned with wall corners, cabinets, or other reference lines. Brackets and arms crafted from high quality materials provide a solid base for these adjustments, so the 200 lb capacity remains supported while fine-tuning position. For repetitive drilling, a self-centering drilling jig specific to this system is available separately, which can streamline boring operations across multiple shelves.

Common Questions About This Timber-LOC Bracket

Select This Timber-LOC Bracket For Solid Wood Runs

The TBR-LOC-1762 8" Floating Shelf Bracket from InnovaShelf provides a 200 lb capacity, up-down adjustment, and sideways adjustment in a concealed Timber-LOC format. Design for a solid wood shelf and a wood substrate aligns with typical shop-built floating shelf projects. Brackets and arms made from high quality materials support demanding shelf, closet, and garage organization work where strength and a clean appearance both matter. Using a component that belongs to a dedicated floating shelves and concealed brackets class gives a focused solution for hidden shelf support. For projects based on solid wood shelves and wood-based mounting surfaces, this Timber-LOC bracket offers a practical way to tie structure, capacity, and adjustability into one concealed support.