TBR-LOC-2762 6" Floating Shelf Bracket

NOTE: As of 4/13/26, InnovaShelf's prefix has changed from IS to RS. This part number has changed from ISTBR-LOC-2762-06 to RSTBR-LOC-2762-06.

TBR-LOC-2762 6" Floating Shelf Bracket For Solid Wood

TBR-LOC-2762 6" Floating Shelf Bracket from InnovaShelf is a Timber-LOC concealed support designed to hold solid wood shelves while keeping hardware hidden, so finished installations present a clean, floating look in closets, garages, or other storage runs.

The Timber-LOC design provides both up-down adjustment and sideways adjustment, so the installer can fine-tune shelf position after mounting, which helps achieve straight, level lines even when wall conditions vary or drilling is slightly off.

Brackets and arms are crafted from high quality materials, which supports maximum strength in service and helps the bracket reach its rated 300 lb capacity when properly installed into a suitable wood substrate.

The bracket is designed to be installed into a wood substrate, so it integrates naturally into typical framing or blocking scenarios where solid wood backing is available behind the finished surface.

The bracket is designed for a solid wood shelf, aligning the support arms with the strength and density of solid lumber, which helps transfer the high load rating into the shelf without relying on weaker materials.

The self-centering drilling jig for this system is sold separately, and that dedicated jig supports more accurate hole placement, which in turn speeds repeat drilling and improves alignment when setting multiple Timber-LOC shelf brackets.

Floating Shelf Bracket Details That Support The Job

• The Timber-LOC system provides up-down adjustment, letting the installer raise or lower the shelf slightly on the arms so multiple shelves line up cleanly across a wall, even when initial drilling heights vary.
• Sideways adjustment built into the Timber-LOC design allows limited lateral movement of the shelf position after mounting, which helps align shelf edges with adjacent cabinetry or wall features without re-drilling.
• Brackets and arms are crafted from high quality materials, which supports long-term strength under load and helps resist deformation when the shelf is subject to heavy, everyday use in storage applications.
• The design is intended for mounting into a wood substrate, so installers working with wood studs, blocking, or panels can rely on familiar fastening methods to achieve secure anchoring of the floating shelf bracket.
• The system is designed for a solid wood shelf, matching the internal support arms to the characteristics of solid lumber so the shelf can carry the 300 lb rated capacity without relying on composite-core performance.
• The Timber-LOC shelf bracket has a 300 lb rating, so it can be used in heavier-duty storage or display situations where higher static loads are expected, reducing the need for additional visible support hardware.

Timber-LOC Floating Shelf Mounting And Adjustment

The Timber-LOC floating shelf bracket is designed to be installed into a wood substrate, so the installer fastens directly into solid wood framing or panels, creating the foundation needed to reach the 300 lb rating in normal use.

The bracket works specifically with a solid wood shelf, which allows the support arms to seat firmly inside the material, helping the shelf behave like an integrated structural element rather than relying on thin skins or hollow construction.

Up-down adjustment built into the system lets the installer tweak vertical position after the arms are set, which is particularly useful when running a bank of shelves where minor layout variances would otherwise show as uneven lines.

Sideways adjustment gives additional fine-tuning in the horizontal direction, helping bring shelf ends into alignment with adjacent components or wall constraints without pulling fasteners or opening new mounting holes.

The self-centering drilling jig for this Timber-LOC system is sold separately and is intended to speed drilling of matching holes in the solid wood shelf, which supports quicker, more repeatable alignment on multi-shelf projects.

Using The Timber-LOC Bracket In Real Projects

Where This Floating Shelf Bracket Fits Best

The TBR-LOC-2762 6" Floating Shelf Bracket sits in the Floating Shelves and Concealed Brackets class, so it is aimed at installations where the load must be supported while the hardware remains hidden behind the solid wood shelf.

As part of the Shelf, Closet & Garage Organization category, it suits storage layouts that require both high capacity and a streamlined appearance, such as closet walls, mudroom runs, or garage organization where exposed brackets are undesirable.

The design assumes a wood substrate, so it works naturally wherever solid wood studs, blocking, or wooden wall panels are present, allowing the bracket to anchor directly into structural wood rather than non-structural surfaces.

The bracket is engineered for a solid wood shelf, which means the shelf body can be bored to accept the Timber-LOC arms, creating a concealed connection that leaves the front and underside visually clean once the shelf is in place.

Within assemblies that draw from Wurth Baer Supply offerings to the woodworking industry, this InnovaShelf Timber-LOC bracket serves as the concealed support component, allowing fabricators to combine it with their preferred solid lumber species.

Details That Support Alignment And Repeat Work

The Timber-LOC system provides up-down adjustment, giving installers the ability to compensate for slight height differences between brackets, which is important when running multiple brackets on uneven framing or long wall sections.

Sideways adjustment adds another layer of control, allowing the shelf to shift slightly along the wall so miters, butt joints, or intersections with cabinets align tightly without the labor of relocating underlying fasteners.

Brackets and arms crafted from high quality materials support the 300 lb rating, which lets fabricators design deeper or more heavily loaded solid wood shelves without resorting to additional visible bracing that would interrupt the clean floating effect.

The 6" bracket length is suited to solid wood shelves sized to accept that insertion depth, so the internal engagement between arm and shelf body contributes to stiffness and reduces deflection under typical storage loads.

The self-centering drilling jig, sold separately for this Timber-LOC system, is intended to position holes accurately in the shelf, helping shops produce repeatable, interchangeable shelves where multiple parts must fit the same bracket layout.

By installing into a wood substrate and using a solid wood shelf, the Timber-LOC bracket ties all components into a wood-to-wood system, which aligns well with the machining capabilities and workflow of woodworking professionals and serious DIY builders.

Common Questions About The Timber-LOC Shelf Bracket

Select This Timber-LOC Bracket For Solid Wood Runs

The TBR-LOC-2762 6" Floating Shelf Bracket pairs a 300 lb rating with concealed Timber-LOC support, so installers handling solid wood shelves over wood substrates can deliver clean floating runs using familiar woodworking processes.

With up-down adjustment and sideways adjustment, the bracket supports precise alignment work across closets, garages, and other organization projects where straight, consistent lines and high capacity are critical expectations.

For woodworking professionals and serious DIY builders sourcing through Wurth Baer Supply, this InnovaShelf Timber-LOC bracket serves as a robust, concealed component to integrate into custom solid wood shelf designs.