SurfPrep 5 inch 100 grit sanding disc describes a 5 inch round abrasive disc designed for sanding tasks where a medium abrasive cut is needed on wood or similar materials, which fits common orbital sanders sized for that diameter. The product uses aluminum oxide abrasive, which delivers a consistent cutting action across the disc surface so material removal stays even during the sanding pass. The abrasive is bonded to a film backing, which provides a flat, stable base under the grit so the disc lies smooth on the pad and helps maintain a uniform scratch pattern. This disc is part of the SurfPrep abrasive discs category, so it fits into workflows already standardized around SurfPrep abrasive solutions for cabinetry or woodworking. The grit rating of 100 positions this disc for leveling and surface prep between rough stock removal and finer finishing, helping installers move efficiently from shaping to pre-finish sanding.
This SurfPrep 5 inch 100 grit sanding disc is sized for orbital sanders with a 5 inch pad, so the disc edge matches the pad edge for stable tracking during use. The 6 hole layout works with sander pads that share the same 6 hole vent pattern, enabling dust collection through the disc when the holes are aligned. Aluminum oxide abrasive layered on the film backing lets the disc conform to the pad while staying dimensionally stable, which supports smooth rotation and helps avoid irregular contact points. As part of the SurfPrep abrasive discs line, the disc integrates into sanding setups already configured for SurfPrep abrasives, helping maintain consistent behavior when changing grits within that system.
The SurfPrep 5 inch 100 grit sanding disc on film fits applications that call for a round 5 inch abrasive disc built around aluminum oxide grit, such as intermediate sanding on wood panels or similar materials. The 6 hole layout aligns with 6 hole pads on compatible orbital sanders, so when the holes match, dust passes through the abrasive into the sander extraction path. This disc sits in the abrasives - abrasive discs category, which positions it as a component in larger sanding sequences where multiple grits are used. With a 100 grit rating, the disc is suited to smoothing surfaces after an initial cut from a coarser grit, preparing the surface for subsequent finer sanding stages. The film backing beneath the abrasive forms a stable base under the grit, which helps the disc follow the sander pad evenly across flat work, supporting a uniform scratch pattern.
The SurfPrep aluminum oxide sanding disc uses aluminum oxide grit to create the cutting face, and this abrasive structure supports a reliable bite into the work surface on each pass. By fixing that grit to a film backing, the disc gains a thin but stable support layer that resists bunching while the tool moves across the surface, so the pad remains fully supported. The 5 inch diameter matches orbital sanders designed around that size, which keeps the sanding contact area predictable and helps installers manage edge control near profiles or borders. A 6 hole pattern built into the disc coordinates with 6 hole pads that move dust away through the pad, helping the abrasive stay clearer as work progresses. With a 100 grit rating, the disc bridges between aggressive stock removal grits and finer finishing grits, which supports a more controlled scratch refinement sequence from step to step.
The SurfPrep 5 inch 100 grit sanding disc is designed for sanders that use a 5 inch round pad, so the disc edge aligns with the pad edge during sanding.
The disc has 6 holes that line up with 6 hole sander pads, allowing dust to move through the disc so the abrasive surface stays clearer in use.
The 100 grit rating places this disc in a medium range, suitable for leveling and surface preparation between coarse cutting and fine finishing steps.
The SurfPrep aluminum oxide sanding disc uses aluminum oxide abrasive to provide a consistent cutting action, supporting predictable stock removal on compatible materials.
The film backing supports the abrasive layer with a flat, stable base, helping the disc stay even on the pad so scratch patterns remain consistent.
This disc is part of the SurfPrep abrasive discs category, so it can be used as the 100 grit step within a SurfPrep-oriented sanding sequence.
The SurfPrep 5 inch 100 grit sanding disc on film, silver, provides a 5 inch diameter aluminum oxide abrasive surface in a 6 hole format, matching orbital sanders built around that size and layout. Its 100 grit rating positions it for mid-sequence sanding where surfaces need refining after heavier cuts and before finer grits. The film backing keeps the abrasive supported across the pad face for stable contact on flat surfaces. For sanding jobs that rely on SurfPrep abrasive discs and 5 inch 6 hole tools, this disc offers a defined role within a controlled, step-based sanding process.
Sold In: 1 Box