SurfPrep 5 inch 320 grit sanding disc describes a 5 inch round abrasive disc that uses 320 grit, so it supports fine sanding where a smooth surface is needed before moving to the next finishing step. The disc uses aluminum oxide as the abrasive, which cuts consistently so surfaces are refined without jumping between different grits. This disc is built on a film backing, so the abrasive sits on a stable base that helps the disc stay flat against the work surface. The disc design has 9 holes, so sanding dust can be pulled through these openings when aligned with a matching pad, helping the abrasive stay exposed while working. The disc color is silver, so it can be identified quickly on a busy bench or cart when sorting different SurfPrep discs.
This SurfPrep 5 inch aluminum oxide sanding disc uses a 9 hole layout, so it is designed to line up with a compatible 9 hole pad pattern during setup. When the holes on the disc and pad match, air movement can draw dust through the surface instead of leaving it under the disc, which helps the abrasive layer keep working instead of loading. The film backing and 5 inch format keep the sanding face uniform across the pad, so the operator can track the contact area easily as they move over the work surface.
This SurfPrep 5 inch 320 grit 9 hole aluminum oxide sanding disc on film is part of the abrasives and abrasive discs category, so it fits into workflows that rely on hook-and-loop style sanding pads sized at 5 inches. The 320 grit level places this disc toward the finer end of sanding steps, so it can be used after coarser grits to refine the surface before other shop processes. The aluminum oxide abrasive works as the cutting layer across the silver disc face, so high spots and light marks can be reduced without immediately stepping to another product. The film backing holds the abrasive layer on a continuous base, so the disc can ride smoothly over flat areas and gentle transitions while maintaining its shape. The 9 hole design across the 5 inch disc connects with dust movement through a properly matched pad, so dust paths are present across the full sanding face.
The SurfPrep film backed 5 inch disc with aluminum oxide and 320 grit works as a matched system of backing, grain, and dust path, so each pass can stay closer to the intended scratch level. The 320 grit classification defines how fine the abrasive points are, so the user can plan this disc as a specific stage in their sanding sequence instead of guessing at its aggressiveness. The film base under the abrasive helps the disc stay more consistent across its silver surface, so contact pressure remains similar as the disc moves across the pad area. The 9 hole pattern makes room for dust to travel away through the disc, so material that is removed has a path off the work area while sanding continues. The 5 inch format ties this SP5HLF320.9 SurfPrep sanding disc directly to tools designed for that pad size, so the disc edge tracks with the outer pad edge throughout the sanding motion.
This SurfPrep 5 inch 320 grit sanding disc uses aluminum oxide as the abrasive, so the cutting surface is defined for controlled material removal on suitable workpieces.
The 320 grit aluminum oxide disc provides a fine sanding grade, so it is suited to surface refinement steps where a smoother finish is needed after coarser grits.
The 9 hole design on this 5 inch 9 hole sanding disc creates dust paths through the disc when aligned with a matching pad, so abrasive faces stay more open during sanding.
The film backed abrasive disc uses a continuous film layer under the aluminum oxide, so the disc stays stable across the pad face for consistent contact.
The SP5HLF320.9 SurfPrep sanding disc part number identifies this specific 5 inch 320 grit 9 hole aluminum oxide film disc for ordering or stocking.
The 5 inch diameter matches sanders designed for 5 inch pads, so the disc covers the working face and keeps sanding focused across the intended contact area.
This SurfPrep 5 inch 320 grit 9 hole aluminum oxide sanding disc on film gives a clearly defined abrasive grade, so it can be assigned to a specific fine-sanding stage in a repeatable process. The aluminum oxide grain, film backing, and 9 hole design work together to keep contact and dust movement predictable over the pad face. For operations that rely on organized grit progressions and known disc behavior, this silver SurfPrep abrasive disc from Wurth Baer Supply fits into a structured sanding sequence that can be repeated across similar jobs.
Sold In: 1 Box