47 inch wooden handrail gives Quiet Glide rolling ladders a dedicated grip point, so users have a solid hold while moving up and down the ladder. Hickory construction provides a sturdy rail, supporting confident use in rolling library ladder applications.
Designed to be used with Quiet Glide's rolling ladders, this handrail works directly in that system so installers can match the original hardware layout. The rail is clear coat finished, so the hickory is sealed and ready for immediate installation in finished interiors.
The handrail uses 1-1/4 inch square stock, providing a defined profile that lines up with matching ladder components in the same system. Steam-bent construction creates the curved form, so the rail follows the intended arc without on-site shaping or bending steps.
The handrail is pre-drilled, so bolt locations are already laid out for the satin brass hardware. This layout helps installers align parts consistently from one ladder to the next, reducing layout time when fitting multiple units in a run.
This Quiet Glide wooden handrail is pre-drilled, so hole placement for the bolts is already established. That layout guides where the handrail seats on the ladder, helping maintain consistent spacing and alignment from project to project.
The 45mm satin brass bolts and 17mm satin brass nuts are dimensioned for this rail, so they thread through the pre-drilled holes and clamp the hickory handrail at the intended thickness. This match between hole sizing and hardware reduces fitting adjustments during installation.
The handrail length of 47 inches provides a defined segment for a rolling library ladder, setting a predictable span of hand support along the ladder side. Installers can use that known length to coordinate rail placement with other ladder components in the Quiet Glide system.
This hickory rolling ladder handrail is designed to be used with Quiet Glide's rolling ladders, so it occupies a specific role in that system. The 1-1/4 inch square stock profile means the rail presents a consistent cross-section along its 47 inch length, which helps it track visually and mechanically with other Quiet Glide ladder parts built around the same dimension.
Steam-bent construction shapes the hickory to match the expected curvature in a rolling ladder handrail, so the rail follows the path the system requires without segmenting or jointing separate pieces. That continuous bent form helps installers position the rail along the ladder side while maintaining smooth transitions at changes in angle.
The clear coat finish on the handrail seals the hickory and provides a clean surface suited to interior rolling library ladder locations. With the finish already applied, installers can mount the rail in its final location within the Quiet Glide system without scheduling separate finishing passes or additional drying time on site.
The Quiet Glide brand association confirms that this handrail belongs within the Quiet Glide rolling ladder lineup, giving installers a defined match between the rail and the rolling library ladders specified for the project. That alignment helps coordinate part numbers and simplifies selection when multiple ladder components are ordered for the same job.
The handrail is pre-drilled for use with 45mm satin brass 1/4-20 KD bolts and 17mm satin brass 1/4-20 KD nuts, so the fastening system is planned around these dimensions. By sizing the holes for 1/4-20 hardware, the rail accepts the bolts cleanly and positions the threads where the matching nuts engage, giving a defined clamp path through the hickory.
Using satin brass for both the bolts and the nuts keeps the visible connection points consistent with the rest of the satin brass details in a Quiet Glide rolling ladder installation. That finish continuity matters in library or display settings where exposed fasteners are directly in the sightline along the ladder rails.
The 47 inch length of the handrail provides a fixed area in which these pre-drilled holes are distributed, giving installers a predictable series of fastening locations to work with. This spacing supports repeatable installations across several ladders in the same project because each handrail uses the same length, bolt count, and hardware sizing.
The manufacturer part number QG.6309.HC.06B-P uniquely identifies this finished hickory handrail with satin brass bolts in the Quiet Glide range, which matters when matching replacement parts or specifying identical rails for additional rolling library ladders in a facility.
This hickory handrail is designed to be used with Quiet Glide's rolling ladders, so it fits directly into their rolling library ladder system layout.
The Quiet Glide wooden handrail is 47 inches long, giving a defined span of hand support that installers can coordinate with the ladder run.
The rolling ladder handrail is made from hickory with a clear coat finish, so the wood is sealed and visually ready for interior ladder installations.
The hickory handrail is steam-bent, which forms the curved shape needed for rolling ladder applications without on-site bending steps.
The handrail uses 1/4-20 KD bolts at 45mm in satin brass and 1/4-20 KD nuts at 17mm in satin brass, matching the pre-drilled hole layout.
The Quiet Glide wooden handrail uses 1-1/4 inch square stock, giving a consistent profile that aligns with the rolling ladder components.
The hickory 47 inch wooden handrail with satin brass bolt layout gives Quiet Glide rolling ladders a defined gripping surface and a coordinated hardware appearance. With pre-drilled holes sized for 1/4-20 satin brass bolts and nuts, the rail installs in a repeatable way across projects.
For rolling library ladder work built around Quiet Glide components, this clear coat finished hickory handrail with part number QG.6309.HC.06B-P provides a matched rail option that supports consistent function and appearance along the ladder line.