47 inch wooden handrail defines this Quiet Glide component as a fixed-length rail sized for rolling library ladder runs. The walnut material gives the handrail a wood surface that visually matches other walnut ladder elements, supporting consistent appearance along the ladder system. The clear coat finish seals the walnut, so the surface is protected from direct contact with raw wood during normal ladder use. Being a wooden handrail, it provides a continuous grasp surface along the ladder side, helping hands follow the rail smoothly as the ladder rolls on its track. The handrail is part of Quiet Glide's rolling ladders line, so it is intended to integrate into that specific hardware system rather than serve as a general-purpose rail. The overall design focuses on providing a sized, finished grasp rail matched to Quiet Glide rolling library ladder installations.
The handrail works with 1/4-20 KD bolts in 45mm satin nickel, so the bolt diameter and thread are matched to the pre-drilled holes, supporting straightforward fastener engagement during assembly. Satin nickel on the bolts provides a consistent metal appearance where the fasteners remain visible on the ladder side, matching other satin nickel elements in the system. The included 1/4-20 KD nuts in 17mm satin nickel are sized to secure those bolts, so the nut flats present the same satin nickel finish on the opposite side of the connection. Using KD bolt and nut pairs creates a through-bolted connection between the handrail and its mating ladder parts, which supports a solid, repeatable joint along the rail length. Together, the wood rail, bolts, and nuts form an integrated handhold and connection path in the Quiet Glide rolling ladder configuration.
This handrail is designed to be used with Quiet Glide's rolling ladders, so it fits within that manufacturer-defined rolling library ladder hardware family. The reference to 1-1/4 inch square stock indicates the handrail is intended to align with ladder stiles or structural members that are built around that dimension, helping the rail sit correctly alongside the ladder sides. By being part of the Rolling Library Ladders product class, the rail is targeted at library-style ladders that travel horizontally along a track instead of fixed-position stairs, so its length and layout correspond to that environment. The steam-bent construction lets the wood rail follow the programmed curve or profile of the Quiet Glide ladder design, which matters when the ladder side is not simply straight from end to end. The walnut material and clear coat finish keep its look and feel consistent with other Quiet Glide walnut ladder components used in the same run.
The handrail being pre-drilled means holes are already located to accept the 1/4-20 KD bolts, simplifying alignment between the rail and its mating ladder parts because the installer follows the existing pattern. Using 45mm satin nickel 1/4-20 KD bolts sets both the working length and thread standard, so once the handrail is positioned, the bolts pass through the rail and the corresponding ladder section with a known engagement depth. Matching 1/4-20 KD nuts in 17mm satin nickel clamp against those bolts, creating a controlled clamping force across the connection, which supports a secure handhold along the rail. The satin nickel finish on both bolts and nuts coordinates the visible metal around each connection point, so each fastener location has a uniform appearance against the walnut and clear coat. These details together help the rail integrate as a repeatable component in the Quiet Glide rolling library ladder hardware set, supporting consistent joints from one ladder project to the next.
This handrail is designed to be used with Quiet Glide's rolling ladders, so it matches their rolling library ladder hardware and layout.
The 1-1/4 inch square stock reference ties the handrail to ladder members built around that dimension, helping the rail align with Quiet Glide ladder sides.
The steam-bent description means the wood is formed to a specific curve, allowing the handrail to follow the intended Quiet Glide ladder profile.
The pre-drilled handrail has holes located for the 1/4-20 KD bolts, guiding bolt placement and hole spacing when assembling the ladder rail connection.
The 45mm satin nickel 1/4-20 KD bolts and 17mm satin nickel nuts secure the handrail to the ladder, creating through-bolted connections along the rail.
The clear coat finish on walnut seals the wood surface, preserving the walnut appearance while providing a finished surface for normal ladder handling.
This Quiet Glide 47 inch wooden handrail in walnut with clear coat is set up for rolling library ladders using 1-1/4 inch square stock, so it aligns with that ladder format. The steam-bent, pre-drilled rail works with the specified satin nickel 1/4-20 KD bolts and nuts, giving a defined path to fasten the handrail into the Quiet Glide rolling ladder system. For projects built around Quiet Glide rolling ladders where a finished walnut rail is planned, this handrail offers a clearly matched wood, length, and hardware combination.