47 inch wooden handrail from Quiet Glide is designed to be used with Quiet Glide's rolling ladders, giving a defined grasp point along the ladder that supports controlled movement on the rail. The handrail is made from white oak, so it aligns with white oak ladder components and creates a consistent look across the system. Steam-bent construction shapes the rail to follow ladder movement, which helps hands track naturally as the ladder rolls and angles. The rail is finished with a clear coat, so the wood surface is already sealed and ready for use where a finished appearance is important. Pre-drilled holes in the handrail set the bolt pattern, which keeps field assembly consistent with the Quiet Glide layout. Satin brass bolt components match the specified finish, tying the handhold into other satin brass ladder hardware.
This Quiet Glide wooden handrail is designed around the Quiet Glide rolling ladder layout, so its pre-drilled pattern coordinates with the ladder stiles for repeatable fastening. The 1-1/4 inch square stock provides flat bearing faces for bolt heads and nuts, which supports solid clamping without complex shaping. Satin brass KD bolts and KD nuts connect through the rail and ladder members, establishing a through-bolt connection that resists pull-out in normal rolling ladder movement. Because the handrail is steam-bent and finished with a clear coat, installers work with a rail that already follows the intended curve and has a sealed surface, reducing shaping and finishing steps during mounting.
This Quiet Glide wooden handrail is part of the Quiet Glide rolling ladder system, so it is used specifically with Quiet Glide's rolling ladders rather than as a general-purpose stair rail. The rail uses 1-1/4 inch square stock, which ties into the proportional scale of typical rolling library ladders and keeps the grasp profile appropriate for that style of ladder. White oak construction supports use in library, office, or display environments where white oak ladders are common and a continuous wood grain line is desired from floor to upper track. Steam-bent shaping makes the rail follow the designed ladder line, which suits installations where the ladder rolls and then rests at an angle for climbing. The clear coat finish on the white oak matches finished ladder components, supporting use in visible locations where a ready-to-use surface is required.
The pre-drilled handrail layout sets fixed positions for the KD bolts, so hole spacing along both rails is controlled and helps keep the rails level relative to each other when mounted on the ladder stiles. Using 1/4-20 KD bolts establishes a known thread size through the handrail and ladder members, which simplifies selection of corresponding ladder components within the Quiet Glide system. Satin brass KD bolts and satin brass KD nuts are specified at 45mm and 17mm, providing defined lengths that engage through the wood thickness while presenting satin brass at the visible connection points. Because the handrail is steam-bent before drilling, the bolt pattern follows the curved profile uniformly, which reduces the chance of misaligned fasteners when building multiple ladders to the same pattern. The clear coat finish on the white oak rail means installers are working with a sealed surface, so handling during fitting does not expose raw wood along the grasp line.
The Quiet Glide wooden handrail is designed to be used with Quiet Glide's rolling ladders, so its shape and pre-drilled pattern align with that specific rolling library ladder system.
The 1-1/4 inch square stock provides a defined, consistent edge profile that hands can grip along the full rail in rolling ladder applications.
The white oak handrail with clear coat finish coordinates with white oak ladder components and provides a sealed, finished surface suitable for visible ladder installations.
Steam-bent construction shapes the handrail to follow the intended ladder arc, which supports smooth hand travel as the ladder rolls and rests at an angle.
Pre-drilled holes set fixed locations for the KD bolts, helping maintain parallel rails and consistent bolt spacing across both sides of the ladder.
The satin brass 1/4-20 KD bolts and KD nuts provide a defined through-bolt connection and present satin brass at visible points to match satin brass ladder hardware.
The Quiet Glide 47 inch wooden handrail in white oak with clear coat finish pairs directly with Quiet Glide's rolling ladders, tying the grasp rail into the rest of the ladder assembly. Its 1-1/4 inch square stock, steam-bent shape, and pre-drilled pattern are set up for the Quiet Glide system, while satin brass KD bolts and KD nuts maintain a consistent satin brass appearance at the connection points. Choose this handrail when the project calls for a white oak, clear-coated rail that follows the Quiet Glide rolling ladder layout.