Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3M 268XA sanding disc is a 6 inch abrasive disc designed for industrial and occupational sanding tasks where controlled, fine finishing is needed. The disc uses aluminum oxide on film, so the abrasive surface combines consistent cutting action with a stable film backing that supports uniform contact across the workpiece. The 5 micron grade positions this disc for very fine sanding steps, helping dial in refined surfaces before final process stages. A no hole configuration keeps the disc face solid, which suits applications where vacuum extraction is not part of the setup. The PSA backing allows the disc to bond flat to compatible backup pads, helping reduce disc slippage during use. As a 3M industrial and occupational product, it is intended for trained workplace users working within established shop processes and standards.
The 3M 268XA sanding disc uses a PSA backing, which is designed to adhere to a compatible flat backup pad on an appropriate sanding tool. When the disc is pressed onto the pad, the adhesive layer holds the 6 inch disc firmly in place so the abrasive face tracks evenly over the work surface. The no hole layout means the disc covers the pad completely without vent patterns, aligning with sanders that do not require vacuum channels. With its aluminum oxide on film construction and 5 micron grade, the disc fits into fine sanding stages where controlled contact and repeatable results across workpieces are priorities in an industrial setting.
The 3M 268XA sanding disc is categorized as an abrasive disc for industrial and occupational use, so it is structured for workplace sanding processes rather than general consumer applications. The 6 inch format matches many industrial abrasive disc tools, giving shops a familiar size for integrating this disc into existing sanding stations. As part of the Abrasives and Abrasive Discs category, it fits environments where repeatable surface preparation and finishing steps are part of a standardized process. The PSA backing supports use on tools designed for adhesive-backed discs, so operators can move through discs as process stages or wear dictate. Because the product is intended for trained industrial and occupational customers, it aligns with shops that operate under documented procedures and standards.
The 5 micron specification on the 3M 268XA sanding disc defines a very fine abrasive level, so each pass removes material in a controlled manner that supports tight finish targets. When this fine grade is combined with aluminum oxide on film, the disc maintains a stable, flat base under the abrasive particles, which helps deliver even scratch patterns from part to part. The no hole face ensures the entire 6 inch surface is active abrasive, supporting consistent contact when sanding across edges or into corners where vent patterns might otherwise interrupt coverage. The PSA backing keeps the disc seated on the pad, which helps avoid shifting that could cause inconsistent finishes. As a 3M industrial and occupational product, it fits workflows where predictable, repeatable sanding performance is central to quality control on finished components.
The 5 micron grade on the 3M 268XA sanding disc indicates a very fine abrasive level, which supports controlled material removal and refined surface preparation in late-stage sanding sequences.
The PSA backing on the 3M 268XA sanding disc bonds the disc to a suitable backup pad, helping it stay aligned during sanding and allowing straightforward disc changes between process steps.
The aluminum oxide on film construction of the 3M 268XA sanding disc provides a stable backing under the abrasive, supporting consistent contact and uniform scratch patterns on workpieces.
The no hole design of the 3M 268XA sanding disc means the abrasive surface is continuous, fitting sanding setups that do not use through-disc dust extraction and maintaining uninterrupted contact.
The 3M 268XA sanding disc is intended for industrial and occupational customers, supporting workplace sanding processes handled by trained users in structured environments.
The 00051141274959 part number identifies this specific 3M 268XA 6 inch, 5 micron, no hole, PSA aluminum oxide on film sanding disc for ordering and process documentation.
The 3M 268XA sanding disc combines a 6 inch diameter, 5 micron grading, and aluminum oxide on film with PSA backing to support fine industrial and occupational sanding tasks. When a process calls for consistent, controlled finishing, this disc provides a defined abrasive step that fits adhesive-backed disc tools already in service. For shops sourcing abrasive discs through Wurth Baer Supply, the 3M 268XA configuration aligns with workflows built around precise surface preparation and documented part numbers for repeat orders.
Sold In: 25 Each
