Dynabrade 50617 dust collection system is designed for hook-up to a self-generated vacuum tool's exhaust, so sanding dust is pulled directly from the tool instead of spreading across the work area. This setup supports dust-free applications, which helps keep surfaces cleaner during prep between coating steps. The system uses a 6 ft (183 cm) long exhaust hose identified as DY50682, giving enough reach to route the hose away from the work surface while still staying close to the sander. Two 1 in diameter cuffs on the hose secure the connection at both ends, so the airflow path stays consistent while the tool moves. A reusable felt bag identified as DY50683 captures the dust, so collected material stays contained at the end of the vacuum path instead of venting into the room.
This dust collection system is ready for hook-up to a self-generated vacuum tool's exhaust, so the installer connects at the existing outlet where air and dust leave the orbital sander. With the 6 ft (183 cm) exhaust hose identified as DY50682 between the tool and the bag, the user routes the line along a predictable path instead of letting dust discharge freely from the tool. The two 1 in diameter cuffs at the ends of the hose form the connection points, so each interface holds the hose in place along the exhaust path during tool movement. The reusable felt bag identified as DY50683 attaches at the hose end, so dust is collected in a single location that can be serviced when the bag reaches its dust load.
This orbital sander dust collection system is specified for dust-free applications, so it is suited to woodworking jobs where airborne sanding dust would interfere with finishing or shop cleanliness. In a workflow using a self-generated vacuum tool, the exhaust port already produces airflow, and this system connects directly to that outlet so the dust path is controlled from the point of sanding. The 6 ft (183 cm) exhaust hose identified as DY50682 gives enough length to route the hose along benches or fixtures while keeping the sander mobile on the workpiece. With the hose terminated at the reusable felt bag DY50683, collected dust is directed to a defined location, which keeps the work area clearer while sanding cabinet doors, trim pieces, or panel surfaces.
The felt bag identified as DY50683 has a one micron filter rating that traps over 99 percent of vacuum particles larger than one micron, so very fine sanding dust is captured before it can circulate in the shop air. That filter performance supports a cleaner environment around the operator during extended sanding passes on wood or similar materials. The bag uses a hook and loop end closure, so it can be opened to empty dust and then fastened again for continued use, keeping the same filter element in service across multiple jobs. With overall dimensions of 14-1/2 in (368 mm) long by 7-1/2 in (191 mm) wide, the bag provides a defined volume for dust collection, which helps reduce service interruptions during typical sanding tasks. Combined with the hose and cuff layout, the system maintains a consistent vacuum path from orbital sander exhaust to the felt filter surface.
The Dynabrade 50617 dust collection system is ready for hook-up to a self-generated vacuum tool's exhaust, so it works with tools that produce their own vacuum flow at the exhaust outlet.
The dust collection system 50617 uses a 6 ft (183 cm) long exhaust hose identified as DY50682, so the hose length supports normal reach between the orbital sander and the dust collection point.
The orbital sander dust collection system hose has two 1 in diameter cuffs, so each end of the hose connects using a 1 in interface for consistent airflow and secure attachment.
The reusable felt bag DY50683 has a one micron filter rating that traps over 99 percent of vacuum particles larger than one micron, so it captures very fine sanding dust during use.
The one micron felt dust filter bag in this system measures 14-1/2 in (368 mm) long by 7-1/2 in (191 mm) wide, so it provides a defined dust holding capacity during sanding work.
The reusable felt dust collection bag identified as DY50683 uses a hook and loop end, so the end can be opened to remove accumulated dust and then fastened closed again for continued operation.
The Dynabrade 50617 dust collection system pairs a self-generated vacuum tool's exhaust with a 6 ft (183 cm) hose and a reusable one micron felt bag, so sanding dust moves from the orbital sander outlet into a defined filter area. For shops working under dust-free application requirements, the one micron filter rating that traps over 99 percent of particles larger than one micron supports cleaner air around finishing work. The 1 in diameter cuffs and bag dimensions of 14-1/2 in by 7-1/2 in create a consistent, repeatable setup, so installers can plan hose routing and dust collection points around benches or work cells. Use this system when a direct exhaust-to-bag path is needed to control sanding dust from self-generated vacuum tools.
Sold In: 1 Each