Sugatsune FS 1-3/8" (35 mm) Center to Center Rubber Pull, FS-04/S

Sugatsune FS Series Rubber Pull For Cabinets

Sugatsune FS Series rubber pull gives you a compact 2 inch handle that combines aluminum construction with a rubber finish, providing a small-format pull that still offers a defined gripping area for cabinet and furniture applications. The 1-3/8 inch (35 mm) center to center spacing sets consistent hole locations, which helps with layout when installing multiple pulls in a row. Aluminum material creates a rigid core, so the pull resists flexing when opening heavier doors or drawers. The rubber finish adds a softer contact surface, which helps improve everyday finger grip compared with bare metal. Projection of 1-1/16 inch sets the pull off the surface enough for fingers to get behind it, which is important on doors with thicker edges or face frames. A 2 inch overall width keeps the pull visually compact, which works well on smaller fronts or tight layouts.

Key FS-04/S Pull Details For Daily Use

• The Sugatsune FS Series 2 inch pull uses aluminum construction, which supports a solid feel during repeated use in cabinet and furniture environments.
• A rubber finish on the pull creates a textured contact surface, which supports a more secure grip during opening and closing.
• The 1-3/8 inch (35 mm) center to center spacing sets a repeatable drilling pattern, which helps keep rows of pulls visually aligned across doors or drawers.
• Projection of 1-1/16 inch holds the gripping surface away from the face, which provides finger clearance even on thicker fronts or face frame cabinets.
• The 2 inch width defines the overall footprint of the pull, which helps planners match scale to narrower rails and smaller drawer fronts.
• M4 x 1 inch screw size specification identifies the thread and length interface, which helps match the pull to appropriate mounting points in standard cabinet construction.

Mounting And Fit Details For This Pull

The FS-04/S rubber pull uses 1-3/8 inch center to center hole spacing, giving installers a clear drilling dimension when setting up jigs or marking faces. With a 2 inch width, the pull fits comfortably on narrow rails where larger handles could crowd edges. Its 1-1/16 inch projection positions the grip forward from the door or drawer front, helping fingers clear decorative trims or edge profiles. The specified M4 x 1 inch screw size defines the threaded connection, aligning with common cabinet pull mounting points that use metric machine threads. Aluminum construction keeps the body stable under mounting tension, so the pull seats firmly against the surface once fastened.

Using The FS-04/S Pull In Real Projects

Where This Sugatsune FS Series Rubber Pull Fits

The Sugatsune FS Series rubber pull, model FS-04/S, is a compact option for cabinet and furniture fronts that call for a 1-3/8 inch center to center mounting pattern. Its 2 inch width suits smaller doors and drawer faces where longer handles are not desired, helping maintain balanced proportions on narrow stiles or rails. The combination of aluminum material and rubber finish supports use on doors or drawers that see frequent operation, because the rigid core manages the opening force while the exterior finish shapes the contact feel. With a projection of 1-1/16 inch, the pull stands off the surface enough to work on fronts with moderate edge details without crowding the hand space. The rubber finish also visually separates the grip area from the surrounding surface, which can support design contrast on light or dark cabinet finishes.

Why These Dimensions Support Consistent Results

The 1-3/8 inch (35 mm) center to center measurement on this FS-04/S rubber cabinet pull defines a precise hole spread, which simplifies setting up drilling templates for multiple fronts and helps avoid misalignment across a bank of cabinets. Because the width is 2 inches, there is minimal overhang past the mounting points, which refines the look on small fronts and reduces interference near adjacent hardware or edges. Projection at 1-1/16 inch creates a fixed stand-off distance, so once the mounting holes are set, the installer can expect consistent finger clearance job to job. The aluminum construction keeps the pull body stable, which supports reliable mounting when the M4 x 1 inch screws apply clamping force. By combining these defined dimensions with the rubber finish, the pull supports repeatable layout, predictable clearances, and a uniform grip feel across an entire run of cabinetry.

Common Questions About The FS-04/S Rubber Pull

Select The FS-04/S Pull For Defined Layout

The Sugatsune FS Series rubber pull FS-04/S pairs a 1-3/8 inch center to center layout with a compact 2 inch width, giving installers a clearly defined footprint for cabinets and furniture. Its aluminum material and rubber finish create a stable yet comfortable grip area that works well on frequently used doors and drawers. With a projection of 1-1/16 inch and specified M4 x 1 inch screw size, the pull delivers predictable stand-off and fastening engagement. Choose this model when a small-format, rubber-finished handle with defined metric mounting details aligns with the design and drilling pattern of your next run.