Omega National Tambour Door Track 18-1/4"W x 3-1/2"D, Plastic - T04019002-W01

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from OGT4019 to RST4019.

Omega National Tambour Door Track For Cabinets

Omega National tambour door track is a plastic track designed to guide a tambour door in an appliance garage or similar cabinet opening. The track measures 18-1/4 inches wide by 3-1/2 inches deep, so it suits cabinet layouts built around that footprint. The track is part of the Finger Lite hardware system, which uses an aluminum coil as a counterbalance against the door, helping the tambour move with controlled action. This track is built for face frame style applications, aligning with common framed cabinet construction in many kitchens and shops. It is designed for tambour thicknesses up to 3/16 inch, so it supports typical thin slat tambour doors used over countertop appliance garages. Together, these details let installers plan a predictable tambour door opening using a known track size, known frame style, and a specific tambour thickness range.

Key Tambour Track Details For Projects

• The 18-1/4 inch width provides a defined span, which helps when sizing the tambour opening and aligning it with surrounding cabinet elements.
• The 3-1/2 inch depth gives space for the tambour path, supporting smooth travel as the door follows the curve inside the cabinet.
• The plastic track body offers a consistent channel surface for the tambour door, aiding repeatable movement along the full run.
• The track is part of Finger Lite hardware, so it works with an aluminum coil counterbalance that assists the door as it opens and closes.
• The face frame style design lets the track integrate with framed cabinet construction, supporting straightforward layout and mounting references.
• The track is designed for tambour thicknesses up to 3/16 inch, helping match the track channel to common thin slat tambour doors.
• The track is classified under appliance garages and tambour doors, aligning it with upper cabinet countertop applications where roll-up access is needed.

Tambour Track Fit, Frame Style, And Operation

This tambour door track is a face frame style component, so it is intended for cabinets built with a frontal frame instead of full-overlay frameless construction. That frame reference gives installers predictable edges for positioning the 18-1/4 inch wide track. The 3-1/2 inch depth accommodates the path of the tambour within the cabinet interior, allowing the slats to roll back without interfering with the cabinet face. Because the track is part of the Finger Lite hardware with an aluminum coil counterbalance working against the door, the motion is engineered around that coil-assisted operation. The design for tambour thicknesses up to 3/16 inch ties the track channel clearance to relatively thin slat assemblies. All of these factors combine to support smooth, guided tambour travel inside a face frame cabinet opening.

Using This Tambour Door Track In Cabinet Work

Where This Omega Tambour Track Fits Best

This Omega National Products tambour door track is classified under appliance garages and tambour doors, so it is oriented toward upper cabinet openings that conceal countertop appliances or similar items. The 18-1/4 inch width and 3-1/2 inch depth work as fixed layout dimensions when designing or retrofitting those spaces. As a face frame style track, it aligns with framed cabinet fronts that dominate many kitchen and shop installations, giving a defined boundary for the track edges. The track is designed for tambour thicknesses up to 3/16 inch, which corresponds to slim tambour slats commonly used for compact roll-up doors. Because it is a component of Finger Lite hardware that uses an aluminum coil as a counterbalance against the door, it suits projects that want coil-assisted tambour operation built into the opening.

Details That Support Smooth Tambour Door Travel

The plastic construction of this tambour door track creates a uniform channel to guide the tambour door through its full motion range. That consistent surface supports steady travel as the slats move into the 3-1/2 inch deep space behind the face frame. The 18-1/4 inch width keeps the path constrained, which helps the door remain aligned along the opening during repeated use. Because the track is part of the Finger Lite hardware system, the aluminum coil counterbalance works in concert with the track to manage the door load as it moves. The track is designed around tambour thicknesses up to 3/16 inch, tying the channel clearance to a specific door build so the door can ride properly without excess play. These combined details support predictable, guided motion for a tambour door in a face frame cabinet.

Common Questions About This Tambour Track

Choose This Track For Face Frame Tambour Projects

This Omega National tambour door track gives cabinet builders a defined 18-1/4 inch by 3-1/2 inch path, a face frame style layout, and support for tambour thicknesses up to 3/16 inch. As part of the Finger Lite hardware system with an aluminum counterbalance coil, it is suited for appliance garages and other tambour door openings that need guided, coil-assisted motion. For projects that match these dimensions and construction details, this track provides a focused solution for routing a tambour door inside a framed cabinet opening.