Omega National Tambour Hardware Pack 26-1/4"W x D, Wood - T04029002-W01

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from OGT4029 to RST4029.

Finger Lite Spring System For Tambour Doors

Finger Lite spring system from Omega National Products is a tambour hardware pack designed for appliance garages and tambour doors in kitchen and bath cabinet applications, giving these doors controlled movement that suits frequent daily use. The Finger Lite hardware uses an aluminum coil that acts as a counterbalance against the door, so the spring action works with the door weight to moderate how the door moves through its travel. This counterbalanced action supports smoother opening and closing, which helps keep movement predictable when the door is raised and lowered repeatedly in a busy workspace. The hardware pack is sized for a 26-1/4 inch wide by D wood tambour layout, aligning with common cabinet appliance garage dimensions. It is intended for use within the appliance garages and tambour doors product class, so it matches typical cabinet maker expectations for this style of rolling door system.

Key Tambour Hardware Details That Matter

• Finger Lite hardware uses an aluminum coil as a counterbalance against the door, so the spring tension works with the door mass to control motion and support more manageable operation during everyday cabinet use.
• The maximum recommended tambour size is a slat length of 30 inches, which defines the door height range this system is designed to handle and helps align the hardware choice to the intended opening size.
• The system is designed for tambour thickness up to 3/16 inch, so wood slats built within that thickness work properly with the hardware track and spring tension for consistent door travel.
• The hardware pack is identified as Omega National tambour hardware for appliance garages and tambour doors, tying the components to a known application in kitchen and bath cabinet layouts.

Tambour Spring System Fit And Setup Basics

The Finger Lite spring system is engineered around a maximum recommended tambour slat length of 30 inches, so cabinet openings built to that height stay within the operating range of the aluminum coil counterbalance. This sizing guidance connects the door design to the hardware performance, helping the spring action support the door throughout its travel. The system is also designed for tambour thickness up to 3/16 inch, so tambour slats milled to that thickness work with the hardware geometry and allow the coil to manage movement more effectively. By pairing a 26-1/4 inch wide wood tambour layout with these height and thickness parameters, the spring system aligns with the typical appliance garage door proportions used in many kitchen and bath cabinet installations.

Using This Omega National Tambour Hardware

Where The Finger Lite Spring System Fits Best

This Finger Lite spring system is part of Omega National Products appliance garages and tambour doors line, so it is suited to cabinet openings that use rolling wood tambour fronts instead of hinged doors. With a 26-1/4 inch wide by D wood tambour hardware pack, it aligns with appliance garage style upper cabinet bays that often sit on countertops in kitchen layouts. The maximum recommended tambour slat length of 30 inches targets door runs around that height, giving a practical range for vertical travel in a typical appliance garage cabinet. Because the system is designed for tambour thickness up to 3/16 inch, it fits wood slat constructions that match that dimension, tying the hardware choice directly to common tambour milling practices in woodworking shops.

How The Counterbalanced Coil Supports Door Operation

The Finger Lite hardware uses an aluminum coil that acts as a counterbalance against the door, and that design feature shapes how the tambour door behaves in everyday use. As the door moves through its 30 inch recommended slat length range, the aluminum coil works with the door weight, helping moderate effort during opening and closing. This counterbalanced action supports smoother control over the rolling motion, which is useful when the door is raised and lowered many times through the workday in a kitchen or bath setting. By matching the coil to tambour thickness up to 3/16 inch, the system ties the spring force to a predictable slat mass and geometry, so the rolling door tracks consistently as it travels. Within a 26-1/4 inch wide wood tambour layout, these relationships between width, thickness, and spring counterbalance help keep the door movement aligned with the hardware design.

Common Questions About This Finger Lite System

Choose This System For Counterbalanced Tambour Doors

The Omega National Finger Lite spring system pairs an aluminum coil counterbalance with tambour doors using slat lengths up to 30 inches and thickness up to 3/16 inch, giving a defined operating range for appliance garage style openings. When a cabinet layout calls for a 26-1/4 inch wide wood tambour front in a kitchen or bath application, this hardware pack aligns width, thickness, and height to the Finger Lite design so the door movement matches the intended counterbalanced action. Select this T04029002-W01 tambour hardware pack when that combination of door size and aluminum coil support suits the planned cabinet opening.