DynaJet In-Line Air Blow Gun mounts permanently between the coupler and air hose, so the operator cleans off work surfaces and purges the line without disconnecting tools. This in-line design lets the user connect once and keep the blow-off point ready whenever air is available, which streamlines repetitive tasks where tools cycle between blowing and cutting or fastening. The blow gun is designed to purge the air line of water and contaminants before starting up air tools, helping reduce moisture and debris at the tool inlet during everyday shop work. Its role as an air line fitting keeps blow-off and purging in the same path as the supply hose, which supports consistent airflow behavior every time the system is opened.
The DynaJet In-Line Air Blow Gun meets O.S.H.A. requirements through a special relief hole in the nozzle, which limits pressure to 30 PSIG (2 Bar) when dead ended on an air line of 150 PSIG (10.3 Bar) or less, supporting safer blow-off conditions during normal use. Its classification as an INLINE AIR BLOWGUN in the air line fittings category defines it as part of the permanent plumbing on a hose rather than a loose handheld piece, helping maintain a consistent installation pattern in shop air systems. The product is available in any quantity, which allows planning for multiple hose stations or incremental additions as workstations expand.
The Dynabrade DynaJet In-Line Air Blow Gun is identified as an air line component in the air line fittings class, so it fits naturally into hose runs that already use couplers and standard air connections. By sitting between the coupler and air hose, the blow gun places its purge and cleaning function directly in the main supply path, which means every hose using it can clear water and contaminants before air tools start. The design focuses on cleaning off work surfaces without disconnecting, aligning with benches, assembly areas, and tool stations where debris needs to be blown away between operations using the same air source. Its role as a dedicated INLINE AIR BLOWGUN supports consistent positioning at each hose drop, so operators know exactly where to access blow-off airflow along the line.
The DynaJet In-Line Air Blow Gun uses durable aluminum construction, which supports long-term service where fittings experience hose drag and handling across floors, tables, and fixtures, helping maintain reliable function over extended shop use. Weighing only 2 oz (0.06 kg), the blow gun adds minimal mass to the hose, preserving flexibility and reducing resistance when workers reposition hoses repeatedly during a job. The special relief hole in the nozzle limits pressure to 30 PSIG (2 Bar) when dead ended on air lines at or below 150 PSIG (10.3 Bar), which aligns air output with O.S.H.A. requirements for typical shop blow-off tasks. The ability to purge air lines of water and contaminants before starting up air tools helps support cleaner internal passages in connected equipment, which can matter for tool responsiveness and general air system hygiene. The manufacturer part number 94467 clearly identifies this specific Dynabrade configuration, simplifying selection whenever the exact INLINE AIR BLOWGUN model is required across multiple hoses or facilities.
The DynaJet In-Line Air Blow Gun mounts between the coupler and air hose to clean off work surfaces and purge the air line of water and contaminants before starting up air tools.
The in-line design lets the user connect once and keep the blow gun permanently on the hose, so purging and blowing off surfaces happen without disconnecting air tools between tasks.
The DynaJet In-Line Air Blow Gun has durable aluminum construction and weighs only 2 oz (0.06 kg), helping reduce hose weight while withstanding regular handling in shop environments.
The INLINE AIR BLOWGUN uses a special relief hole in the nozzle that limits pressure to 30 PSIG (2 Bar) when dead ended on an air line of 150 PSIG (10.3 Bar) or less.
This Dynabrade in-line air blow gun is used as an air line component at hose stations to clean work surfaces and purge water and contaminants before operating air tools.
The Dynabrade part number 94467 identifies this specific DynaJet In-Line Air Blow Gun configuration, helping match the exact INLINE AIR BLOWGUN across hoses or replacement orders.
The DynaJet In-Line Air Blow Gun from Dynabrade combines an INLINE AIR BLOWGUN layout, durable aluminum construction, and an OSHA-oriented 30 PSIG relief nozzle to support routine blow-off and purging directly at the hose. Its 2 oz (0.06 kg) weight keeps hoses manageable, while the between-coupler-and-hose mounting keeps the cleaning point where operators already handle the line. For air lines that need surface cleaning and contaminant purging before tools start, this in-line air blow gun 94467 offers a focused option built for air line fittings workflows.
Sold In: 1 Each