Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
84 inch KV83 shelf standard from Knape and Vogt provides a vertical track for adjustable shelving, so closet, garage, or storage shelves can be positioned as needed along the wall. The standard is 3/4 inch wide and 1/2 inch deep, which gives installers a slim profile that still supports typical shelf brackets. The KV83 model is made from 14-gauge steel, so it resists bending under normal shelf loads in residential or light commercial storage layouts. An anochrome finish coats the steel, so the standard has a neutral metallic appearance that coordinates with typical closet and garage hardware. The standard is part of the Knape and Vogt shelf standards and brackets system, so it fits into common workflow for installers already using KV components on projects.
On the KV83 standard, screw holes are spaced 12 inches apart on center, which simplifies laying out fastener locations along studs or backing for repeat installs. This spacing also helps installers quickly align multiple standards on the same wall, since hole locations repeat in an easy pattern from top to bottom. The standard is adjustable in 1 inch increments, which means shelf brackets can be repositioned in 1 inch steps for clearances above clothing rods, storage bins, or tools without re-drilling structure. Recommended fasteners are #7 flat head screws, which are sold separately; that sizing guides bit and driver selection so standards can be mounted cleanly and consistently.
The 84 inch KV83 heavy-duty oversized shelf standard works in taller closets and garage walls where multiple shelf elevations are needed. Its 84 inch height spans a typical floor-to-ceiling closet zone, so installers can plan upper and lower shelves on the same run. The KV83 model is typically used with KV183 and KV161 series brackets, so it supports bracket selection from those Knape and Vogt families during layout. The 3/4 inch wide by 1/2 inch deep profile makes the standard suitable near cabinet sides or partitions where space is limited. With adjustment in 1 inch increments, the track supports fine-tuning shelf height around rods, organizers, or existing utilities, which helps layouts adapt to varied site conditions.
Because the KV83 standard is punched for adjustment in 1 inch increments, it provides a predictable vertical grid for aligning shelves across a bank of standards. Installers can count slots or measure in 1 inch steps, which speeds up setting matching shelf heights on opposite walls. The 12 inch on-center screw hole spacing helps maintain consistent anchoring; running fasteners at these intervals ties the 14-gauge steel firmly to studs or backing along the full height. The anochrome finish on the steel gives a smooth surface for sliding brackets in and out of the slots, which supports repeated reconfigurations as storage needs change. Using #7 flat head screws aligns the head profile with the countersunk holes, so the screw heads sit flush and do not interfere with bracket engagement along the track.
The 83 ANO 84 standard has an 84 inch length, which suits full-height closet or garage runs where multiple shelf positions are needed on a single vertical track.
The KV83 standard is typically used with KV183 and KV161 series brackets, so bracket selection can follow those Knape and Vogt families during system layout.
The KV83 standard is adjustable in 1 inch increments, so brackets can be moved up or down in 1 inch steps to set clearances for clothing, bins, or tools.
The KV83 shelf standard measures 3/4 inch wide by 1/2 inch deep, giving a slim profile that sits close to the wall while still guiding shelf brackets.
The KV83 standard is made from 14-gauge steel with an anochrome finish, combining rigidity with a neutral metallic surface for typical storage areas.
On the KV83 standard, screw holes are spaced 12 inches apart on center, and recommended fasteners are #7 flat head screws sold separately.
The Knape and Vogt KV83 heavy-duty oversized shelf standard in an 84 inch length combines 14-gauge steel construction, 3/4 inch by 1/2 inch dimensions, and 1 inch adjustment steps for flexible storage layouts. With 12 inch on-center screw holes and an anochrome finish, it supports straightforward mounting and clean appearance in closet or garage projects. Using this 83 ANO 84 standard with KV183 or KV161 series brackets aligns the vertical track and bracket system so adjustable shelves can be planned confidently across your installation.
Sold In: 1 Each
