Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Quickscrews #6 x 1-1/4" modified pan head face frame and pocket-hole screw is engineered for joining 3/4-inch hardwood face frame stock — rail to stile, face frame to cabinet box, and adjacent frame connections — where a fine thread, clean seating head, and split-resistant point make the difference between a tight joint and a cracked stile.
Face frame work puts specific demands on a screw. The head needs to pull the joint closed without acting as a wedge — which is why the modified pan head on this screw bears flat against the pocket wall rather than burying into it. The fine thread is matched to hardwood: it engages the dense grain of maple, oak, and cherry with enough thread surface to hold the joint under load, where a coarse thread would either strip on entry or fail to draw the pieces flush. At 1-1/4 inches, the screw reaches full thread engagement in 3/4-inch stock without punching through the show face. That combination of length, thread, and head style is what separates a true face frame screw from a general-purpose wood screw pressed into service for cabinetry.
The plain finish keeps this screw positioned for interior cabinetry where the fastener stays hidden behind the face frame or inside the pocket. The Type 17 Auger Point does the heavy lifting at entry: its fluted tip cuts through hardwood fibers and clears chips from the bore, which lowers the torque needed to seat the screw and protects the stile from splitting near the pocket opening. That chip-clearing action is especially valuable when driving into hard maple or white oak at production pace, where a sharp gimlet point alone would raise splitting risk on every joint.
Cabinet shops building hardwood face frames in quantity are the core user. A box of 6000 covers a serious production run without the interruption of restocking mid-job. Smaller shops and finish carpenters attaching hardwood frames to cabinet boxes will find the same benefits: the screw seats cleanly, holds firmly, and leaves no split or raised grain at the joint line. It is a poor fit for softwood or sheet-good face frames, where a coarse-thread screw pulls more effectively — and it is not an outdoor fastener.
Hardwood has a dense, tight grain structure. A fine thread engages more thread surfaces per inch of shank, which improves holding power and reduces the risk of the screw stripping out as it seats. Coarse thread is better suited to softwood, plywood, MDF, and particleboard, where the wider thread pitch digs into the looser fiber matrix.
Yes. The modified pan head and 1-1/4-inch length match the standard screw specification for most pocket-hole jig systems set up for 3/4-inch stock. Confirm your jig manufacturer's screw recommendation if you are joining a different stock thickness.
A #2 square drive bit. The square recess is designed to hold the screw on a correctly sized bit for one-handed placement — useful when reaching into tight cabinet interiors at an angle.
For softwood pine, poplar, or sheet-good face frames, a coarse-thread pocket-hole screw pulls more reliably. This screw's fine thread is optimized for hardwood and may not develop full holding power in lower-density materials.
The plain finish is designed for interior applications where the screw head stays concealed inside a pocket or behind the frame. It is not rated for exterior use or high-humidity environments.
When the job calls for tight, clean hardwood face frame joints at volume, this Quickscrews #6 x 1-1/4" screw delivers the right thread, head, point, and drive in a box sized to keep pace with a production shop.
Sold In: 1000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 8000 Each |  WL3B61250B Mfr# 2722 | Quickscrews #6 x 1-1/4" Modified Pan Head Face Frame and Pocket-Hole Screw Square Drive - Type 17 Auger Point Fine Thread Plain, 2722 - 8000/Box | ||||
Sold in: 7000 Each |  WL3B61500B Mfr# 2724 | Quickscrews #6 x 1-1/2" Modified Pan Head Face Frame and Pocket-Hole Screw Square Drive - Type 17 Auger Point Fine Thread Plain, 2724 - 7000/Box | ||||
Sold in: 1000 Each |  WL3B61500P Mfr# 3656 | Quickscrews #6 x 1-1/2" Modified Pan Head Face Frame and Pocket-Hole Screw Square Drive - Type 17 Auger Point Fine Thread Plain, 3656 - 1000/Box |