Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PULL 96MM GRAY NYLON identifies this Hardware Concepts pull as a gray nylon handle sized for 96 mm, giving installers a concise way to match the pull to layout drawings that specify metric drilling patterns. The stated 4-1/8 inch length defines the overall handle span, which helps in checking visual proportion on doors or drawers where edge clearances and rail widths matter. The 3-3/4 inch center to center dimension describes the mounting hole spacing, tying directly to drilling jigs and existing bores on replacement jobs. A 1-1/4 inch projection sets how far the pull stands off the surface, providing enough clearance for fingers while keeping the profile tight for narrow walkways and close-fitting cabinetry. The 3/8 inch width gives a slim gripping surface that reads clean and modern, which suits projects where a low-profile pull is preferred.
The 3-3/4 inch center to center dimension defines the exact spacing between mounting points, so installers can set up jigs or boring equipment to that measure for repeatable layouts. The 4-1/8 inch overall length shows how far the pull extends end to end, which matters when centering it on narrow rails or between panel details. With a 1-1/4 inch projection, the pull stands off the surface enough for a comfortable grasp without extending excessively into walk paths or interior clearances. The 3/8 inch width keeps the pull slim on the face of the cabinet, which can be useful when hardware needs to sit comfortably between adjacent doors or design elements.
This Hardware Concepts 4-1/8 inch length gray pull is classified under Handles and Pulls, positioning it as a general cabinet handle for doors and drawer fronts. The Nylon Series material and nylon construction provide a non-metallic option, which suits cabinetry where a softer-feeling pull is preferred over metal. Its gray finish gives a neutral appearance that can sit quietly against many wood tones, painted fronts, or laminate surfaces in shops, offices, and residential spaces. The 3-3/4 inch center to center spacing aligns with a common mounting pattern, so it works where that drilling layout is desired for new cabinetry or when pairing with other pulls using the same spacing. Because the overall length is 4-1/8 inches, the pull offers a moderate hand span that works well on both mid-size doors and typical drawer widths without dominating smaller fronts.
The 3-3/4 inch center to center specification keeps fastener locations fixed, which supports consistent alignment across a run of cabinets when repeated with a drilling template. A 1-1/4 inch projection defines how far the grip stands off the surface, providing clearance that can help reduce contact between hands and the door or drawer finish during regular use. The 3/8 inch width keeps the profile narrow, which helps maintain clean lines when multiple cabinets sit closely together or when hardware is placed near panel edges. The 4-1/8 inch overall length allows installers to visually balance the pull relative to stile or drawer heights, creating a proportional look that matches common cabinet dimensions. Together, these dimensions help maintain uniform spacing, alignment, and appearance wherever this pull is used.
This product is a Hardware Concepts pull classified under Handles and Pulls, so it functions as a cabinet handle for doors or drawers.
This pull has a 3-3/4 inch center to center mounting dimension, which sets the distance between the two mounting holes for layout and drilling.
The Hardware Concepts 2524-021 pull has an overall length of 4-1/8 inches, giving a moderate hand span on cabinet doors and drawers.
This pull is part of the Nylon Series with nylon material and a gray finish, providing a neutral, non-metallic handle option.
The gray nylon pull has a 1-1/4 inch projection, setting the stand-off distance from the cabinet surface for hand clearance.
This cabinet pull has a 3/8 inch width, giving a slim grip that keeps the hardware visually light on the cabinet front.
The Hardware Concepts 4-1/8 inch length gray pull with a 3-3/4 inch center to center layout offers a defined mounting pattern for cabinet projects that use this spacing. Its Nylon Series nylon construction and gray finish provide a neutral, non-metallic handle where that look and feel are desired. When a project calls for a pull with 1-1/4 inch projection and a slim 3/8 inch width, this PULL 96MM GRAY NYLON configuration gives those dimensions in a straightforward cabinet handle.
Sold In: 1 Each