Hardware Concepts 4-9/16" (116 mm) Length White Pull, 2121-010 (WITH SCREWS)

Hood Pull White Plastic For Cabinet And Hood Use

Hood pull white plastic from Hardware Concepts, Inc. is a 4-9/16 inch length white pull designed as a functional handle for cabinets, hoods, and similar openings where a simple grip is needed. The pull is part of the 2121 Series, so it follows a consistent profile that helps maintain a uniform look across multiple doors in the same project. Its plastic material provides a lightweight pull that is easy to handle during layout and installation on wood surfaces. The white finish gives a neutral appearance that works with a wide range of cabinet and hood color schemes in shops, kitchens, or utility spaces. With a center to center dimension of 3-3/4 inches, this pull aligns with a common drilling pattern, supporting straightforward placement on new work or when updating existing fronts. The pull width of 1-3/8 inches offers a usable gripping surface that helps with everyday operation.

Key Details Of The 2121 Series White Pull

• The 4-9/16 inch length provides a compact pull that fits smaller doors or hood fronts while still giving enough hand contact for a controlled opening stroke during daily use.
• The 3-3/4 inch center to center dimension matches a common boring layout, which streamlines drilling jigs and speeds repetitive installations across banks of doors or hoods.
• The 7/8 inch projection sets the pull off the surface enough for comfortable finger clearance, helping users grab the handle without scraping knuckles against the face material.
• The 1-3/8 inch width offers a stable bearing surface against the door, which helps spread hand force across the pull and supports smooth opening and closing cycles.
• The white finish creates a clean, neutral look that ties in with many cabinet styles, so installers can use a single pull style across different rooms or project zones.
• The plastic material keeps the pull lightweight, which reduces added load on smaller hinges and supports use on lighter doors or hoods without stressing their hardware.

Mounting And Alignment Details For This Hood Pull

This hood pull is set up for a 3-3/4 inch center to center mounting layout, giving installers a clear reference for drilling two through-holes in the door or hood face. The 4-9/16 inch overall length leaves some material beyond the mounting points, which helps visually balance the pull on narrower fronts. A projection of 7/8 inch positions the gripping area slightly off the surface, which assists when pulling from above or below the handle. The 1-1/4 inch wood screw size is specified for mounting, so the fastener length is matched to pull thickness and typical cabinet materials. The 1-3/8 inch width sits flat against the surface, offering a consistent contact area once the pull is tightened down.

Using This Hardware Concepts Hood Pull In Projects

Where The 4-9/16 Inch White Pull Works Best

The 4-9/16 inch length suits smaller cabinet doors and hood panels where a compact pull is preferred over wide handles, helping keep fronts uncluttered. As a hood pull white plastic design from the 2121 Series, it fits jobs that call for a straightforward handle on utility cabinets, shop storage, or basic kitchen hoods. The white finish supports use on light-colored casework, creating a uniform look across multiple doors in banks or runs. With a 3-3/4 inch center to center spacing, the pull aligns with many existing drilling patterns, which is helpful when replacing old pulls that already use this hole layout. The 1-3/8 inch width offers enough presence to look proportional on standard door rails while still fitting on narrow stiles.

Why The Verified Dimensions Support Consistent Results

The 3-3/4 inch center to center measurement gives a fixed drilling reference that works well with templates, reducing layout variation from door to door. The 4-9/16 inch length allows some edge margin beyond the screw locations, which helps the pull look centered and intentional even on slim fronts. A 7/8 inch projection allows fingers to wrap behind the pull, supporting a secure grip during repeated openings without needing excessive force. The 1-1/4 inch wood screw size is matched to typical cabinet construction, which helps achieve solid thread engagement into wood substrates once the holes are bored. The plastic material keeps the handle weight low, so the pull adds minimal additional loading to existing hinges and door hardware. Being part of the 2121 Series, the pull profile can be repeated across multiple doors, promoting consistent alignment lines and visual continuity throughout a run.

Common Questions About The 2121 Series White Pull

Selecting This White Plastic Hood Pull For Your Job

The Hardware Concepts, Inc. 2121 Series hood pull white plastic design offers defined dimensions for predictable layout on cabinets and hoods. With a 4-9/16 inch length, 3-3/4 inch center to center spacing, and 7/8 inch projection, it fits projects needing a compact, neutral white pull. The specified 1-1/4 inch wood screw size, plastic construction, and 1-3/8 inch width support straightforward mounting on typical wood casework. For jobs that call for a simple white handle pattern repeated across multiple fronts, this 2121-010 hood pull provides a clear, measurable option ready to integrate into drilling plans.