498mm W Series Extension Hanger, Nickel/Black

Sugatsune W-300 Extension Hanger For Closets

Sugatsune W-300 extension hanger is a 498mm W Series extension hanger designed to carry clothing on a sliding arm below a shelf. Constructed of steel rods, it provides a rigid structure that supports garments while resisting bending in everyday closet use. The nylon guides support the sliding action, so the hanger arm moves smoothly in and out from under the shelf during access. This extension hanger is designed to mount perpendicularly to underneath of shelf, which lets the bar project straight out from the cabinet or closet for easier reach. The finish is Nickel with Black nylon, giving a neutral, job-site-friendly appearance that blends with typical closet hardware. The product is part of the Closet Extension Hangers class, so it suits projects that need a pull-out hanging point where a fixed rod is not practical.

Key Extension Hanger Details That Save Time

• The 498mm W Series extension hanger length provides a defined hanging zone, so garments can be organized on a pull-out arm where depth is available but side space is tight.
• Construction of steel rods creates a solid support arm, which maintains alignment under normal clothing loads during repeated sliding cycles.
• Nylon guides support the movement of the hanger arm, reducing friction so the extension action stays consistent over many open-and-close operations.
• The design to mount perpendicularly to underneath of shelf positions the hanger at a right angle to the shelf, allowing front access in narrow closet or cabinet openings.
• The Nickel finish with Black nylon presents a clean, neutral appearance, helping the hardware coordinate with a wide range of closet interiors and shelf materials.
• The product is categorized as a Closet Extension Hanger, aligning it with closet, shelf, and garage organization layouts that need extendable hanging space.

Under-Shelf Extension Hanger Mounting Details

This extension hanger is designed to mount perpendicularly to underneath of shelf, so the main rail runs straight out from the shelf surface. That orientation allows the hanger arm to clear face frames or door openings where side-mount hardware would interfere. The hanger uses 3/4 inch (M3.5 x 20) long screws, giving a defined fastener length that matches typical shelf thicknesses while seating the bracket firmly. The Nickel and Black nylon finish sits below the shelf line, so installed hardware visually recedes while still offering a clear pull point for day-to-day use. As a closet extension hanger, it works where a fixed rod would be difficult to reach without a sliding movement.

Using The W-300 Clothing Carrier In Projects

Where This Closet Extension Hanger Fits Best

The W-300 clothing carrier belongs to the Closet Extension Hangers product class, aligning it with closet, shelf, and garage organization projects needing pull-out hanging capacity. Its 498mm W Series extension hanger length lets the arm reach forward into workable space from deeper shelving, which suits full-depth closet shelves or upper cabinets. Because it mounts perpendicularly to underneath of shelf, the hardware fits in layouts where the shelf spans side to side and the access opening is at the front, such as reach-in closets. The Nickel and Black nylon finish coordinates with typical closet rods and white or wood-grain shelves, making it suitable for both residential closet systems and shop-built storage units. Steel rod construction supports everyday hanging of shirts, jackets, or similar garments along the bar.

Details That Support Repeatable Hanger Installation

The combination of steel rods and nylon guides gives the W-300 a consistent sliding path that helps installations perform the same way across multiple units in a project. Using 3/4 inch (M3.5 x 20) long screws provides a known fastening depth, which helps installers maintain similar pull-out alignment from one shelf bay to the next. The perpendicular under-shelf mounting pattern sets a clear reference line relative to the front edge of the shelf, so the hanger arms can be lined up visually across a run of closets. The W Series 498mm extension length is fixed, so planning rod spacing and clearances can follow a repeatable dimension from job to job. As a Nickel and Black nylon closet extension hanger from Sugatsune America, the unit ties into closet and organization layouts where consistent hardware appearance and motion support professional results.

Common Questions About The Sugatsune W-300 Hanger

Selecting This W-300 Hanger For Closet Runs

The 498mm W Series extension hanger from Sugatsune America offers steel rod construction, nylon guides, and a Nickel with Black nylon finish in one under-shelf unit. Its design to mount perpendicularly to underneath of shelf supports pull-out hanging space in reach-in closets and cabinets. With a defined 498mm extension length and 3/4 inch (M3.5 x 20) long screws, the W-300 suits installers planning repeatable closet extension hanger layouts across multiple bays.