Edgebanding 2002, White .018" Thick x 7/8" Width

Edgebanding 2002 White .018 x 7/8 For Panels

Edgebanding 2002 White .018 x 7/8 identifies this Doellken Woodtape PVC edge banding as a white 0.018 inch thick, 7/8 inch wide solution for finishing exposed panel edges, so it covers typical board thickness while keeping the edge profile relatively slim. The white color works with light laminate designs when you want the edge to visually blend with the face. The .018 inch thickness keeps the material modest in build, which suits straightforward cabinet and casework edges where a thinner edge detail is preferred. The 7/8 inch width gives a bit of overhang on common 3/4 inch substrates, supporting clean trimming and a consistent reveal after machining. Supplied in a 600 foot roll, it supports longer runs of cabinetry or multiple smaller jobs from a single part number, which helps standardize material selection and reduce changeovers.

Key White PVC Edgebanding Work Advantages

• The Doellken Woodtape brand PVC edge banding provides a synthetic edge solution, so it pairs with laminate and similar surfaces where a matching plastic edge is desired for a coordinated appearance and straightforward processing.
• The 0.018 inch thickness manages the balance between coverage and a lean profile, which supports tight reveals on doors and drawer fronts while still masking raw substrate edges along cabinet components.
• The 7/8 inch width offers working room on 3/4 inch panels, so installers can trim back to a flush edge without starving the edge of material, helping reduce visible substrate after final sizing and finishing passes.
• The 600 foot roll length supports extended production runs, which lets shops run repeated cabinet or casework parts from the same roll, helping keep color and gloss level consistent from cabinet to cabinet.
• The white color provides a neutral edge solution, aligning with many light decorative surfaces so the edge reads as part of the overall design rather than a contrasting strip along shelves and verticals.

Edgebanding Size Details For Installation Fit

This PVC edge banding is 7/8 inch wide, which gives extra coverage beyond a 3/4 inch panel and allows trimming for a clean, flush fit along both faces. The 0.018 inch thickness keeps the applied edge relatively thin, so it suits edge banding setups where the cutter or trimmer is dialed in for lean profiles without heavy rounding. The 600 foot roll format supports edge banding machines or hand-fed setups over many parts, so installers can run doors, drawer fronts, and cabinet sides using the same material for a uniform edge look across the job.

Applying This White PVC Edge Banding On Jobs

Where This Doellken Edge Banding Is Used

This Doellken Woodtape edge banding serves as a PVC edge solution for projects using coordinating decorative surfaces. The web description notes a color match to Nevamar S7024 Chalk in a textured finish as good, which positions this banding for use when that Nevamar design is on the faces and a close edge color is required. It also indicates a close match to Pionite SW813 Ice White in a suede finish and a good match to Pionite SW836 Winter White suede, so it works where those Pionite designs appear on cabinets, fixtures, or casework and the edge needs to sit visually near the face color. For Tafisa, it is described as close to L175 White Crystalite and good for L178 Classic White Crystalite and L191 Glacier White Crystalite, which gives shops a single white edge option that visually coordinates with several Tafisa designs on panels, partitions, or fronts.

Why These Size And Match Details Matter

The 7/8 inch width and 0.018 inch thickness give installers a known edge geometry, so edgebanders and trimmers can be set once for a job that uses common 3/4 inch substrates. This consistent size helps reduce rework caused by under-coverage or excessive edge build, which is important when doors and drawer fronts must align cleanly. The identified color matches to Nevamar, Pionite, and Tafisa designs let shops reference specific decorative surfaces during planning, so they can select this single part number when those designs appear on a project and keep edges visually in the same color family. Using one white PVC edge banding across those listed designs simplifies inventory and helps maintain a unified look across cabinets, panels, and shelving where those laminates or board finishes are specified.

Common Questions About This White PVC Edgebanding

Selecting This White Edgebanding For Your Project

This Doellken Woodtape PVC edge banding provides a white 0.018 inch thick, 7/8 inch wide solution in a 600 foot roll that aligns with several Nevamar, Pionite, and Tafisa designs, so it supports consistent, coordinated edges across cabinet and casework projects using those surfaces.