Paramount 72" Hanging Rail 3/4", Black, 2126-6B

72 Inch Pendaflex Hanger Rail For File Drawers

72 inch Pendaflex hanger rail from Paramount Extrusions Company is a file drawer component designed to support Pendaflex-style hanging files along a drawer or cabinet run. The rail height of 3/4 inch sets a clear reference line for how the files sit, which helps keep rows of folders even in drawer systems or custom casework. The 72 inch length lets the installer cut the aluminum bar to suit multiple drawer widths along a bank, so one piece can serve several openings where layout allows. As part of Wurth Baer Supply's drawer construction systems and drawer box accessories offering, this black rail fits into projects where file storage needs to be integrated into cabinetry or casework.

Key Pendaflex Rail Details That Support Builds

• The rail is constructed of 1/8 inch thick aluminum flat stock, giving a solid edge for hanging file hooks and providing a straight reference line during installation whether the rail is used full-length or cut to custom size.
• The 3/4 inch height defines how high the hanging files ride, which helps maintain consistent spacing in deeper file drawers where vertical alignment of folder tops affects usability and labeling visibility.
• The rail is 72 inches long, so it can be cut down to span one wide file drawer or several narrower drawers on the same cabinet run, which supports efficient material use on multi-drawer installations.
• This version uses a black finish, allowing the rail to visually blend with darker drawer interiors or match other dark hardware components in the drawer box assembly.
• Pendeflex hanger rails are available in two finishes - plain aluminum and black - so the builder can stay with the same geometry while matching different interior design schemes across multiple casework runs.
• Pendeflex hanger rails are also available in two heights - 1/2 inch and 3/4 inch - so the 3/4 inch option can be chosen where slightly taller file support helps align with specific drawer side or file tab heights.

Hanger Rail Fit And Layout In Drawer Systems

This black Pendaflex hanger rail sits within the file drawer components category, so it is intended to work as part of a broader drawer construction system rather than as a stand-alone shelf part. The 1/8 inch aluminum flat stock profile gives a predictable edge thickness for setting out drawer interior clearances and side-to-side spacing of files. With a 3/4 inch height, the rail engages hanging file hooks at a consistent elevation along the drawer length, which aids in maintaining smooth sliding contact between the folders and the supporting rails. The 72 inch overall length supports layout flexibility: one rail can be cut to match several drawer interior spans on a single cabinet project when dimensions allow.

Where This Pendaflex Rail Fits And Why It Matters

Using The 72 Inch Rail In File Drawer Layouts

This 72 inch Pendaflex hanger rail is positioned by Wurth Baer Supply as part of drawer construction systems and drawer box accessories, so it is intended for drawer-based file storage rather than open shelving. Being a file drawer component, it serves as the structural edge that engages the hooks on Pendaflex-style hanging files. The 3/4 inch height determines where along the drawer side the files hang, which directly affects how much of the tab and folder top is visible above the drawer front. Because the rail is 72 inches long, a fabricator can cut multiple shorter rails from a single piece to suit individual drawer widths, which can reduce offcut waste on banks of standard-width file drawers. The 1/8 inch thick aluminum flat stock construction keeps the interface between the rail and file hook consistent across all drawers derived from the same bar length.

Details That Support Consistent File Storage Results

The 1/8 inch thick aluminum flat stock used for this Pendaflex hanger rail provides a uniform bearing surface for hanging file hardware, helping folders track evenly when drawers are opened and closed. The black finish on this version helps integrate the rail visually in darker drawer interiors, which can be important where exposed hardware edges would otherwise stand out against dark materials. With two available heights - 1/2 inch and 3/4 inch - the 3/4 inch rail gives a slightly taller profile, which can align folder tops with particular drawer front heights or interior dividers in a planned system. Having both plain aluminum and black finish options within the same Pendeflex hanger rail line lets a shop keep geometry and cutting patterns consistent while meeting different appearance requirements in various projects.

Common Questions About This Pendaflex Hanger Rail

Selecting This 72 Inch Rail For File Storage

This 72 inch Pendaflex hanger rail from Paramount Extrusions Company combines 1/8 inch thick aluminum flat stock, a 3/4 inch height, and a black finish to support organized hanging file storage in drawer-based systems. As part of Wurth Baer Supply's file drawer components offering, it fits projects where Pendaflex-style hanging files are integrated into custom drawer construction. When a file drawer layout calls for a long bar that can be cut to multiple spans while keeping folder alignment consistent, this rail provides a defined geometry for the hanging interface and visual appearance.