Porter Cable Replacement Pad No Hole 5" Pad - Non-Vacuum PSA, - 13900

Porter Cable Replacement Pad 13900 For Sanding

Porter Cable replacement pad 13900 is a 5 inch non-vacuum PSA pad designed as a sanding pad for woodworking sanders. The PSA pad construction supports pressure-sensitive adhesive-backed abrasives, which lets installers and woodworkers refresh worn discs quickly during production or finishing work. The pad is identified as PSA PAD, RK332, tying it to the RK332 sanding platform so the part number directly matches the intended tool series when specifying replacements. Being 5 inches in diameter keeps the pad in line with common small-orbit sanders, so the contact area stays familiar when changing from an original pad to this replacement. The pad thickness is noted as 3/4 inch, which builds in a cushion layer between the sander backing and the abrasive disc, so it can better conform to slight contours without cutting through edges aggressively. This 3/4 inch thick contour design supports controlled sanding along profiles while still backing the abrasive evenly.

Key Porter Cable Pad Details For Pros

• The 5 inch pad size matches compact sanding footprints, so users can stay in the same orbit class when changing pads and keep edge reach and control consistent across cabinets, trim, or furniture parts.
• The non-vacuum PSA pad format omits dust extraction holes, so the full face supports adhesive-backed discs and keeps pressure uniform across the surface when sanding solid faces or narrow parts.
• The 3/4 inch thick contour pad construction adds a compliant layer under the abrasive, helping the pad follow gentle curves while still backing flat faces predictably in typical woodworking tool setups.
• The PSA PAD, RK332 designation connects the pad to the RK332 sanding configuration, giving buyers a direct reference when matching this Porter Cable pad to the intended sander family or service stock.
• The manufacturer part number 13900 ties directly to Porter Cable Corporation documentation, supporting straightforward reordering for shops that track sanding components by exact part code.

Porter Cable Pad Fit, Size, And Setup Use

The Porter Cable Corporation 13900 pad uses a 5 inch diameter, so the working face lines up with sanders designed around this disc size and preserves the familiar sweep pattern during use. As a non-vacuum PSA pad, the face is uninterrupted by holes, which helps distribute sanding pressure evenly across the full circle when using pressure-sensitive adhesive discs in finishing or between-coat work. The 3/4 inch thick contour pad structure gives the backing some depth, so it can absorb small variations in surface profile and feel less harsh on edges compared with very thin backers. With its PSA PAD, RK332 identification and 13900 part number, this pad integrates into shops that standardize on Porter Cable sanding platforms and stock parts by code for repeatable maintenance and tool setup.

Using This Porter Cable PSA Pad On The Job

Where This 5 Inch PSA Sanding Pad Fits Best

This 5 inch non-vacuum PSA pad sits in the Sanders and Accessories class and is listed under Woodworking Tools and Equipment, Power Tools, Sanders, Accessories, so it is positioned for woodworking shop and site sanding tasks. The pad size and PSA format suit sanders taking 5 inch pressure-sensitive adhesive discs, so it works naturally in workflows that rely on stick-on abrasive changes between grits on doors, drawer fronts, trim parts, and furniture components. The classification and PSA PAD, RK332 description place it within the kind of sanding systems used by cabinet shops and finish carpenters, so it fits into existing abrasive programs where 5 inch discs are already standard. With a 3/4 inch thick contour build, the pad supports work on slightly profiled edges and gentle curves commonly found in moldings or raised panel transitions, helping keep contact even along those shapes.

Why The 3/4 Inch Contour Design Supports Results

The 3/4 inch thick contour pads design gives the Porter Cable replacement pad 13900 more cushioning than a thin rigid backing, which helps distribute hand pressure across the disc when guiding the sander. That contour thickness allows the pad to settle into minor undulations in wood surfaces, so abrasive discs maintain better contact without digging into isolated high spots during leveling passes. As a non-vacuum PSA pad with no holes, the solid face supports adhesive bond across the full 5 inch circle, which keeps discs seated flat as they flex with that 3/4 inch core while working near edges. The RK332 identification in the PSA PAD, RK332 description ties performance expectations to the intended tool family, so pros can align sanding feel and balance with other Porter Cable Corporation components in their setups. The combination of 5 inch diameter, non-vacuum PSA surface, and 3/4 inch contour build gives shops a defined backing feel they can repeat across jobs when standardizing finishes.

Common Questions About Porter Cable Pad 13900

Selecting This Porter Cable Pad For Your Sander

The Porter Cable replacement pad 13900 combines a 5 inch diameter, non-vacuum PSA face, and 3/4 inch thick contour construction, so it supports pressure-sensitive adhesive discs in woodworking sanding tasks. Its PSA PAD, RK332 and 13900 identifiers align with Porter Cable Corporation sanding platforms, giving shops a defined reference when stocking or replacing pads. For buyers working within Woodworking Tools and Equipment and Sanders and Accessories categories, this contour pad offers a clearly specified backing option built for 5 inch PSA sanding workflows.