Porter Cable Replacement Pad No Hole 5" Pad - Non-Vacuum PSA, - 13700

Porter Cable Replacement Pad For 5 Inch Sanders

Porter Cable replacement pad gives a straightforward way to refresh a 5 inch sanding setup when the original pad is worn, so the sander can keep delivering consistent contact on wood and similar materials during regular shop use.

The 5 inch no hole pad design matches non-vacuum sanding where dust extraction holes are not required, so the sanding disc presents a continuous surface to the workpiece and maintains even pressure across its face while you work edges or flat panels.

This non vacuum PSA pad is designed for pressure sensitive adhesive discs, which allows sanding discs to be pressed on for solid grip and peeled off when spent, helping keep changeovers quick while maintaining a secure bond during sanding passes.

The pad is 3/4 inch thick, giving the surface enough depth to contour and support the disc without feeling overly rigid, so it can better follow slight surface variations while still backing the abrasive for efficient stock removal.

Porter Cable Corporation branding and the 13700 manufacturer part number provide a clear identifier for matching this pad to the correct tool family, which streamlines reordering and reduces the chance of grabbing the wrong style pad for a given sander.

Key Details That Support Sanding Results

• The 5 inch diameter aligns with common small sander formats, so the pad can cover a practical working area on cabinet parts and trim while remaining easy to control on edges and tight spots.
• The no hole configuration suits non-vacuum sanding setups, keeping a full uninterrupted abrasive face on the work, which helps maintain consistent scratch patterns on surfaces during extended sanding sessions.
• The non vacuum PSA pad backing is designed for pressure sensitive adhesive discs, holding discs firmly in place under load while still allowing spent discs to be removed and replaced without tools between sanding grits.
• The 3/4 inch thick contour construction gives some cushioning behind the abrasive, helping the pad adapt to mild curves or uneven spots while still supporting the disc so it cuts rather than digging or gouging.
• The Porter Cable Corporation brand and the clearly defined 13700 part number mark this as a specific replacement pad, simplifying identification when aligning shop inventory with particular sanders and minimizing downtime.

Installation And Use Of The 5 Inch NH PSA Pad

The 5 inch NH PSA pad is intended as a replacement pad in a sander setup where the original backing pad has worn out, so swapping to this pad restores a flat, supportive surface for PSA discs and keeps the sander working to its intended performance level.

The no hole, non vacuum configuration means the face of the pad is a solid disc, which supports pressure sensitive adhesive sanding discs across their entire area, helping them stay seated against the work without areas that flex differently around dust holes.

The 3/4 inch thick contour pads br description highlights that the pad has measurable thickness and contour capability, so it can better support sanding on both flat faces and slightly contoured profiles, which is valuable on cabinet doors, moldings, and similar components.

The REPL PAD, 5'NH PSA description reinforces that this pad is purpose-built as a replacement pad with a 5 inch no hole PSA format, so installers and shop staff can quickly match it to tools that specify this size and style when refreshing sanding equipment.

Using This Replacement Pad In Daily Woodworking

Where This Porter Cable Replacement Pad Fits Best

This Porter Cable replacement pad is categorized under Sanders and Accessories within Woodworking Tools and Equipment, positioning it squarely for use in woodworking shops and on jobs where power sanders are part of the workflow for preparing wood surfaces.

The 5 inch format lines up with compact sanders commonly used on cabinetry components, drawer fronts, and trim pieces, so one pad size can handle a wide range of shop parts without switching to larger sanding gear for detail work.

The non vacuum PSA pad configuration suits sanding tasks where dust collection through the pad is not part of the setup, which can be helpful on quick touchups or smaller pieces where a hose would interfere with handling or access.

The 3/4 inch thick contour design gives the pad enough body to support sanding along profiled edges and light contours, so the abrasive can reach into gentle shapes on moldings while still supported by a consistent backing layer.

Because the pad sits in the Sanders and Accessories category, it fits into existing power sander workflows as a straightforward replacement component, helping keep equipment in service rather than shifting to different sanding methods when an original pad wears.

Details That Help Deliver Consistent Sanding Results

The Porter Cable 13700 manufacturer part number clearly identifies this specific replacement pad, which matters when shops run multiple sanders and need pads that match particular tools to maintain consistent sanding feel across stations.

The 5 inch NH PSA pad description specifies a no hole, pressure sensitive adhesive disc format, so users know the pad is intended to present a full-face contact area under PSA discs, encouraging an even finish on panels and case parts.

The 3/4 inch thick Contour pads br wording points to a comparatively substantial pad thickness, which supports the disc more evenly during sanding passes and helps distribute pressure to reduce localized wear on the abrasive surface.

The non vacuum design means air is not drawn through the pad, so the structure is dedicated purely to supporting the disc, which can be beneficial in applications where the full backing integrity is used to control edge rounding and surface flatness.

The SAP description REPL PAD, 5'NH PSA reinforces that this component is a replacement pad for a 5 inch no hole PSA setup, giving purchasing and shop staff a concise way to match paperwork and inventory to the correct sander configuration for ongoing work.

Common Questions About The Porter Cable 13700 Pad

Selecting This 5 Inch Pad For Your Sander

This Porter Cable 5 inch no hole pad, identified as REPL PAD, 5'NH PSA and manufacturer part 13700, offers a 3/4 inch thick contour design for PSA discs, aligning with non-vacuum sanding setups in woodworking and cabinet-focused shops.

The non vacuum PSA pad format and clear 5 inch sizing simplify matching this replacement pad to existing sanders, so sanding stations can return to consistent operation with a full-face backing ready for pressure sensitive adhesive discs.