
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Toilet partition hardware one way slotted shoulder screws 1-3/16 are Jacknob Corporation shoulder screws designed for toilet partition hardware installations where a one-way drive is required. The screws are part of Jacknob's standard screw packs, so they match common toilet partition hardware setups in commercial restrooms that specify this style. Each screw uses a one-way slotted drive, which accepts installation with standard one-way drivers and resists removal with conventional flat or Phillips tools, helping deter tampering. The 1-3/16 inch length provides a defined shoulder size for joining partition hardware components with consistent engagement. All screws and barrel nuts are made of steel, providing a solid metal fastener for typical partition hardware loads. The chrome plated finish on the steel gives the hardware a bright, finished appearance that aligns with common partition trims while helping the metal surface resist wear in busy restroom environments.
These Jacknob one way slotted shoulder screws are designed so they can only be removed with one way screw removers, which means installed screws are not easily backed out with general-purpose drivers. In a toilet partition application, that one-way design helps keep pilaster and panel connections more secure against casual disassembly. During installation, the one-way slot accepts the matching driver, so screws advance smoothly into the barrel nuts made of the same steel material. The 1-3/16 inch length gives a predictable fit through typical partition hardware thicknesses specified for this screw, so installers can work to a known fastener dimension. Because the screws and barrel nuts share a chrome plated steel construction, the assembled connection maintains a uniform finish around brackets and hardware in the stall layout.
These toilet partition hardware one way slotted shoulder screws 1-3/16 are suited to builders hardware and toilet partition hardware projects that call for Jacknob Corporation standard screw packs. The combination of steel screws and steel barrel nuts with a chrome plated finish aligns with restroom partition hardware that uses bright chrome fittings. In practical terms, an installer working on partitions that specify this shoulder length can rely on the 1-3/16 inch dimension to pass through brackets and panels and draw tight into the matching barrel nut. Because the screws are one way slotted, they serve well in high-traffic or public restrooms where fastener heads remain exposed yet need some resistance to casual removal. The part being designated as toilet partition hardware signals its role in the fastener set that ties together hardware components in these assemblies.
The one-way slotted design means these Jacknob one way slotted shoulder screws accept torque in the tightening direction while resisting reverse turning with ordinary tools, supporting repeatable tamper-resistant joints across a toilet partition run. The 1-3/16 inch shoulder screw length provides a fixed dimension, so once an installer is set up for this size, multiple stalls can be fastened using the same screw geometry without constant adjustment. Having all screws and barrel nuts made of steel keeps both sides of the connection in the same robust material family, which benefits alignment because the paired components respond similarly under load. The chrome plated finish on the steel screws and barrel nuts creates a uniform, bright appearance around hinges, brackets, and other visible hardware points, helping finished stalls look consistent from unit to unit in a bank of partitions.
The Jacknob Corporation 9813 screws use a one way slotted drive, which installs with one-way drivers and resists removal with general-purpose tools in toilet partition hardware.
The toilet partition hardware one way slotted shoulder screws are 1-3/16 inch long, giving a defined shoulder length for partitions that are designed around this specific screw size.
The screws and barrel nuts are made of steel, providing a metal fastener system suitable for the structural needs of toilet partition hardware assemblies.
The Jacknob shoulder screws and barrel nuts have a chrome plated finish, giving a bright look that matches chrome partition hardware while helping surfaces handle routine contact.
One way slotted screws in toilet partitions allow installation with one-way drivers but can only be removed with one way screw removers, helping deter casual tampering with exposed fasteners.
These toilet partition hardware one way slotted shoulder screws 1-3/16 are manufactured by Jacknob Corporation, a brand focused on toilet partition hardware components.
The toilet partition hardware one way slotted shoulder screws 1-3/16 from Jacknob Corporation give installers a defined steel fastener system with one-way slotted drive, matching barrel nuts, and chrome plated finish. That combination supports toilet partition hardware projects that rely on a specific shoulder screw length and desire exposed fasteners that resist casual removal. For work using chrome-finished partition components built around Jacknob standard screw packs, these screws align with that hardware design so stall connections stay consistent from fastener to fastener.
Sold In: 100 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 100 Each | JN9703 Mfr# 990009703 | 1/2" Truss Head One-Way Barrel Nuts, Slot Drive #10-24 Thread, Polished Chrome, Box of 100 by Jacknob | ||||
Sold in: 100 Each | JN9713 Mfr# 990009713 | 5/8" Truss Head One-Way Barrel Nuts, Slot Drive #10-24 Thread, Polished Chrome, Box of 100 by Jacknob | ||||
Sold in: 100 Each | JN9783 Mfr# 990009783 | Toilet Partition Hardware One Way Slotted Shoulder Screws 3/4" | ||||
Sold in: 100 Each | JN9823 Mfr# 990009823 | 1-5/16" One-Way Shoulder Screw, Slot Drive #10-24 Thread, Polished Chrome, Box of 100 by Jacknob |