Toilet Door Hardware Kits, Left In-Swing Surface Mount Hinges and Components

Toilet Door Hardware Kit Left In-Swing Use

toilet door hardware kit left in-swing identifies this Jacknob Corporation kit as a complete set of hinges and components for a left-hand in-swing toilet door, so installers can match the hand and swing needed for a specific stall layout with confidence. The Jacknob toilet door hardware kit is classified as toilet door hardware within builders hardware, which aligns it with commercial stall and partition work where consistent parts and finishes matter across multiple doors. The hardware kit is designed for 1 inch thick doors and 1-1/4 inch thick pilasters, so installers can plan material selection and layout knowing the kit is sized around these common partition dimensions. The hand of the door is determined from the outside of the stall, which gives a clear rule for selecting left-hand in-swing hardware when reading plans or walking a job site. All items are available as hardware kits and individual components, which helps maintenance teams match this 20100 kit when replacing only specific toilet door hardware parts.

Key Jacknob 20100 Hardware Details In Use

• The Jacknob toilet door hardware kit with surface mount hinges provides a coordinated group of parts for one door, so hinge, latch, strike, and hook work together with matching geometry and finish on a single stall opening.
• All hardware kits will complete one door, letting installers quantify how many 20100 kits are required on a restroom project simply by counting door openings instead of breaking down separate component counts.
• All items are made of Zamak with a chrome plated finish, giving a uniform metal base and appearance that supports a consistent look across latches, strikes, and hooks on every stall front.
• The surface mount hinges are made of brass with a chrome plated finish, pairing a brass hinge body with the same chrome appearance so hinge performance and visual match both support a professional stall installation.
• The hardware kit is designed for 1 inch thick doors and 1-1/4 inch thick pilasters, which aligns hinge and latch engagement to these thicknesses so clearances and keeper alignment fall into place more predictably.
• All hardware kits are supplied with mounting screws, so each 20100 kit can be installed using the provided fasteners without sourcing separate screw sizes for the hinges and components.

Left In-Swing Stall Mounting And Layout

Jacknob 20100 door hardware is identified as DOOR HDWE, LH INSWING, so it is configured for left-hand in-swing operation where the door swings into the stall. The hand of the door is determined from the outside of the stall, meaning that when facing the stall from the outside, a door swinging into the stall with hinges on the left aligns with this left in-swing kit, which simplifies ordering and field identification. Surface mount hinges in this kit attach directly to the face of the door and pilaster, streamlining installation on 1 inch thick doors and 1-1/4 inch thick pilasters commonly used in toilet partitions. Matching chrome plated finishes across the components support a clean stall front when doors are aligned across a restroom run.

Toilet Door Hardware Role In Stall Assemblies

Where This Toilet Door Hardware Kit Fits

This Jacknob toilet door hardware kit with surface mount hinges is designed specifically for toilet door hardware applications, so it fits into builders hardware projects involving toilet partitions and stalls. The kit is built for 1 inch thick doors and 1-1/4 inch thick pilasters, aligning it with many standard partition systems where these dimensioned components are used, which helps hinge leaves, latches, and keepers register correctly on the faces of doors and pilasters. The toilet stall left hand in-swing orientation is defined from the outside of the stall, so on a layout where the door swings into the stall and the hinges are on the left, this 20100 kit matches the required hand. Because all items are part of a coordinated Jacknob Corporation toilet door hardware kit, the latch, strike/keeper, and hook work together around a consistent geometry, which is important when building or servicing multiple stalls in the same restroom.

How The Components Support Repeatable Results

The Jacknob 20100 door hardware kit uses Zamak components with a chrome plated finish for the latch, strike/keeper, and hook, which provides a common base alloy and surface treatment so fastener bite, machining, and finish appearance are consistent from part to part. The surface mount hinges in this kit are made of brass with a chrome plated finish, pairing a brass hinge structure with a matching chrome surface so the hinges visually match the Zamak pieces while providing their own material characteristics at the pivot points. This combination of Zamak chrome plated components and brass chrome plated surface hinges creates a unified look across the entire stall front, reducing visual mismatches when doors are aligned in a row. All hardware kits will complete one door, which means that for field replacements or new installations, each opening can be handled as a single Jacknob 20100 kit, simplifying planning for installers and maintenance staff responsible for toilet partition hardware.

Common Questions About Jacknob 20100 Hardware

Select Jacknob 20100 For Left In-Swing Stalls

The Jacknob 20100 toilet door hardware kit, identified as DOOR HDWE, LH INSWING, is aimed at left in-swing toilet stall doors using 1 inch doors and 1-1/4 inch pilasters. The combination of Zamak chrome plated components and brass chrome plated surface mount hinges gives a coordinated Jacknob toilet door hardware kit solution for one door, tied to specific component numbers for each part. For projects or maintenance work where left-hand in-swing stall doors are required, this Jacknob Corporation kit offers a defined set of parts under one manufacturer part number.