Formica 2041-99 Polished Gold Aluminum Metal defines this decorative metal laminate as a polished aluminum sheet in a gold tone bonded to a phenolic back, so it acts as a hard-wearing vertical surfacing material with a refined metal appearance. The 48"x120" size provides a large-format panel, which helps cover tall walls or casework faces with fewer seams for a more continuous metal look. The Grade 85, .040 inch (1.0 mm) thickness creates a substantial laminate layer, which supports a solid feel on suitable substrates. The phenolic back restrains the metal from creasing, which helps the sheet stay flatter while handling and bonding. This phenolic back also improves adhesion to appropriate substrates, which supports strong, even bonding across the full panel area.
This DecoMetal metal laminate is engineered for vertical interior applications, so it is suited to wall panels, columns, and casework faces where a metal look is needed without structural loading. The 48"x120" format supports full-height layouts in many commercial interiors, which can simplify layout and reduce joint detailing. The Grade 85, .040 inch (1.0 mm) construction provides enough body for standard laminate fabrication, which works well with typical shop cutting and trimming methods on suitable equipment. The phenolic back improves adhesion to appropriate substrates, which helps maintain bond integrity along edges and around cutouts in these vertical uses.
This Formica Corporation laminate is categorized as Formica HPL and listed as DecoMetal metal laminate, which positions it for decorative surfacing work where a real metal appearance is needed on interior vertical surfaces. The polished gold aluminum face delivers a metallic finish, which suits reception areas, retail fixtures, and other interior zones where visual impact is important. The 48"x120" sheet size lets fabricators span many standard wall and panel heights, which can reduce layout breaks and simplify seam positioning. As a laminate product, it works as a surfacing layer over suitable substrates in millwork and fixture construction, giving the project a metal aesthetic without relying on solid metal plate fabrication.
The Grade 85 designation with .040 inch (1.0 mm) thickness defines a specific laminate build, which helps fabricators anticipate how the sheet will cut, route, and finish on their equipment. This thickness gives the installer enough material to work cleanly at edges, which supports crisp reveals and edge treatments on vertical interior work. The phenolic back prevents creasing in the metal face, which is valuable when moving full 48"x120" sheets around the shop or jobsite because it helps preserve the polished surface. That same phenolic back improves adhesion to substrates, which supports an even bond line across the panel and helps the laminate lie flat after pressing. As a Formica metal laminate, it aligns with established laminate fabrication practices, which lets shops integrate it into existing casework and panel workflows while delivering a distinct polished gold aluminum finish.
This laminate uses polished aluminum sheet in a DecoMetal metal laminate with a phenolic back, which provides a real metal surface supported by a stable backing for decorative vertical interior use.
The product is a 48"x120" laminate sheet, which covers a large area in a single piece and supports full-height wall or panel applications in many interior installations.
This laminate is Grade 85 at .040 inch, or 1.0 mm, which offers a substantial decorative metal layer suitable for standard laminate fabrication steps on appropriate equipment.
The phenolic back prevents creasing of the metal and improves adhesion to substrates, which supports flatter handling and stronger bonding over the full sheet area.
This DecoMetal metal laminate is engineered for vertical interior applications, which makes it suited to wall panels and casework faces where structural loading is not required.
The polished gold aluminum surface delivers a reflective metallic appearance, which creates a distinct decorative statement on interior vertical surfaces and feature elements.
The Formica 2041-99 Polished Gold Aluminum Metal, 48"x120" metal laminate combines a polished gold aluminum face with a phenolic back, which supports decorative vertical interior panels that handle well and bond effectively. The Grade 85, .040 inch (1.0 mm) thickness and large sheet size align with typical laminate shop workflows, which lets fabricators integrate this DecoMetal metal laminate into casework, wall panels, and interior features where a polished metal look is part of the design. For projects that call for a gold-toned metal surface on vertical interior substrates, this laminate offers a defined construction that supports predictable fabrication and consistent visual results.
Sold In: 1 Sheet