Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Bosch flush trim bit 1/2 inch x 2-1/2 inch is a router bit designed for flush trim work where a clean, even edge is required along a template or workpiece. This Bosch router bit is built as a carbide tipped, ball bearing pilot trim bit, so it performs cutting and guiding in one pass for efficient workflow at the router table or hand-held. The 3-flute cutting design on this Bosch flush trim bit supports chatter free production trimming, which helps maintain consistent edge quality across multiple parts. A 1/4 inch shank connects the bit to the router collet, matching many light and mid-duty routers used in cabinetry and trim work. The compact ball bearing assembly at the tip guides the cut while the glue shield feature on the bearing assembly helps the bearing operate in trimming situations where adhesive squeeze-out is present along the edge.
This 1/2 inch x 2-1/2 inch flush trim bit, 3-flute, 1/4 inch shank format allows the bit to be mounted in routers equipped for 1/4 inch shank tooling, aligning the bit securely in the router collet. The carbide tipped, ball bearing pilot design means the cutting edges trim material flush to the surface contacted by the bearing, so setup involves referencing the bearing to a guide surface and letting the bit follow that edge through the cut. The compact ball bearing assembly positions the bearing close to the cutters, helping maintain accuracy where the bit follows a template or work edge. With its chatter free production trimming intent, the 3-flute layout is suited to routing passes where a smooth finish and controlled feed along the guide surface are priorities.
The Bosch 1/2 inch x 2-1/2 inch flush trim bit is a router bit in the trim bits class, so it is suited to routing tasks that require bringing an overhanging edge flush with a reference surface. The carbide tipped cutting edges support trimming operations in woodworking or similar shop environments where repeated passes are common. Because the bit is described as providing chatter free production trimming with extra smooth flush trim cuts, it aligns with production or shop work where multiple identical parts follow a template or straightedge. The ball bearing pilot sits at the cutting end of the router bit and rides against a template, cabinet part, or panel edge, guiding the cutters to follow that surface and bring laminate or stock edges even with the reference. The glue shield on the bearing assembly is designed for situations where adhesive is present near the trim line, helping the bearing continue to operate when trimming along glued joints or laminated edges in cabinet and casework building.
The 3-flute configuration on this Bosch router trim bit spreads the cutting load across three carbide edges, which supports smoother cutting action and helps limit chatter in production trimming, giving more consistent surfaces from part to part. The 1/4 inch shank provides a defined interface to routers designed for 1/4 inch tooling, allowing the bit to seat properly in the collet for consistent alignment each time it is installed. The compact ball bearing assembly and its position relative to the cutters mean the guidance point and the cutting edges remain close together, minimizing offset between where the bearing runs and where material is removed, which supports accurate flush trimming along patterns. The bearing with glue shield is specified so the pilot can run in environments where glue squeeze-out is present along edges, which is common when trimming glued panels or laminates, and this helps maintain guided rotation of the bearing during those passes. The identification of the bit as manufacturer part number 85216M and as a ROUTER BIT, FLUSH TRIM provides a clear reference when selecting or repeating this specific trim bit in a shop standard.
The Bosch 85216M is a carbide tipped flush trim router bit with a ball bearing pilot, so it trims material flush to a reference surface while the bearing guides the cut.
This flush trim router bit is described as 1/2 inch x 2-1/2 inch, which defines the trim diameter and cutting length for bringing edges even with a template or workpiece.
The 3-flute layout on this bit supports chatter free production trimming, which helps produce extra smooth flush trim cuts across multiple routed parts.
This Bosch router trim bit uses a 1/4 inch shank, so it fits routers that accept 1/4 inch shank tooling for mounting in the collet.
The ball bearing pilot rides along a template or work edge while the cutters remove overhanging material, keeping the flush trim cut aligned with the reference surface.
The bearing assembly is equipped with a glue shield, which is designed so the pilot can operate in trimming situations where glue squeeze-out is present near the trim line.
The Bosch flush trim bit 1/2 inch x 2-1/2 inch, 3-flute, 1/4 inch shank combines carbide tipped cutting edges with a ball bearing pilot to handle guided trimming along templates or work edges. Its chatter free production trimming design suits repetitive routing where extra smooth flush trim cuts support tight-fitting parts. The compact ball bearing assembly with glue shield is tailored to trimming tasks near glued joints or laminated edges. For projects that call for a clearly identified ROUTER BIT, FLUSH TRIM, manufacturer part 85216M from Bosch provides a defined option for consistent, guided flush trimming work.
Sold In: 1 Each