Hole and Flush Cut Trimmer is a Bosch router bit designed to drill through surface lamination into a pre-cut opening and trim the edge flush in one operation, so a fabricator can handle drilling and trimming in a single pass. This bit is built as a solid carbide router bit, which means the cutting portion is entirely carbide, supporting consistent cutting performance during demanding laminate work. As a trim bit in the Bits, Blades and Cutters category, it is intended for shaping and finishing edges rather than bulk material removal, which suits laminate cutouts. The bit uses a 1/4 inch shank, so it fits routers and trimmers that accept this common shank size used in many woodworking shops. Identified as Bosch part number 85287, it matches ordering and reordering by that specific manufacturer reference.
This solid carbide router bit is designed to handle drilling through surface lamination into a pre-cut opening and trimming the edge flush in one operation, so a fabricator can align on the opening and then complete the pass without changing tools. With its 1/4 inch shank, the Hole and Flush Cut Trimmer fits into routers and laminate trimmers built for this shank size, which helps integrate it into existing laminate routing setups. Being a trim bit within the router bits product class, it is oriented toward controlled passes along the edge of a pre-cut opening, supporting accurate edge definition where laminate wraps over an underlying cutout.
This Bosch Hole and Flush Cut Trimmer is described as drilling through surface lamination into a pre-cut opening and trimming the edge flush, so it is applied after a substrate opening already exists and laminate has been laid over that opening. In this situation, the bit first creates the breakthrough through the surface lamination into the pre-cut opening, then follows the edge of that opening to trim the laminate flush to the underlying cut, giving a clean, even edge around the perimeter. As part of the trim bits category, it is suited to detailed laminate edge work rather than heavy stock removal, which fits finishing stages in cabinet and surfacing fabrication.
The Bosch 85287 solid carbide router bit performs drilling through surface lamination into a pre-cut opening and edge trimming in one operation, reducing the number of tool changes and passes needed around each opening, which supports consistent workflow from one cutout to the next. Because the bit is solid carbide, the cutting section is made from carbide, which supports precise cutting action on laminate surfaces where edge quality influences the finished appearance of cutouts. Its 1/4 inch shank connects the bit to routers designed for this shank size, helping maintain secure mounting during the combined drilling and trimming pass. Classified as a router bit in the trim bits category, it is intended to follow the edge of the pre-cut opening closely, supporting repeatable flush edges in surface lamination projects where the substrate is already cut.
The Bosch 85287 router bit is described as solid carbide, so the cutting section is made from carbide, supporting accurate cutting on laminate surfaces.
The Hole and Flush Cut Trimmer uses a 1/4 inch shank, so it fits routers and laminate trimmers designed for 1/4 inch shank tools.
The solid carbide bit drills through surface lamination into a pre-cut opening and trims the edge flush in one operation, combining breakthrough and trimming in a single pass.
This product is in the router bits class and trim bits category, indicating it is intended for trimming and finishing laminate edges around openings.
The Bosch Hole and Flush Cut Trimmer works with a pre-cut opening by first drilling through the surface lamination and then trimming the laminate edge flush to the existing cutout.
The manufacturer part number is 85287, which identifies this specific Bosch Hole and Flush Cut Trimmer router bit for ordering and replacement.
The Bosch Hole and Flush Cut Trimmer, part number 85287, is a solid carbide router bit built to drill through surface lamination into a pre-cut opening and trim the edge flush in one operation, suiting fabricators who work with laminate over pre-cut substrates. Its 1/4 inch shank allows use in routers that accept this common shank size, integrating into existing trim setups. For shops creating or finishing laminate cutouts where a pre-cut opening already exists, this trim bit offers a dedicated option focused on flush edge definition.
Sold In: 1 Each