Fluidall Hose Assemblies - Binks 71-3303 is a 25 foot fluid hose assembly with a 3/8 inch inside diameter, so it moves finishing materials a practical distance from pumps or pressure pots to spray equipment on real jobs. The working pressure rating of 500 psi supports demanding finishing operations where stable flow at higher pressures matters for consistent spray patterns. A nylon tube provides excellent chemical resistance, which supports use with a wide range of resins, solvents, and coatings in professional finishing environments. The hose is described as having excellent flexibility, helping installers route it around equipment and along walls or ceilings without fighting stiff hose memory. Good chemical resistance and non-corrosive construction support durability when exposed to varied finishing materials. The nylon lined construction is stated as offering maximum versatility, so one hose can serve multiple fluid applications in a shop setup.
This fluid hose uses three-piece plated brass reusable connections, which allows repeated assembly and disassembly at the hose ends during installation or maintenance. The connection thread size is 3/8 inch NPS (female), so it mates with equipment that uses 3/8 inch NPS male threads in spray systems. The hose reinforcement consists of a high tensile synthetic braid, specially designed for maximum flexibility under pressure and maximum coupling retention, helping the connection stay secure once fitted. The Class B oil resistant black synthetic smooth rubber cover supports hose life in environments where oil contact may occur. A temperature range from 0 degrees F to 190 degrees F (maximum) allows use in many shop conditions where materials and ambient temperatures vary during daily operation.
This Binks fluid hose assembly is recommended as a premium, versatile fluid hose for finishing operations plus a wide range of fluid applications, so it fits well in professional spray finishing setups. Fluidall is stated as ideal for resins and solvents contained in latices, epoxies, urethanes, alkyds, primers, acrylics, polyesters, silicones, bitumastic coatings, oil and water based paints, lacquers, alcohol, and latex coatings, so one hose can serve many coating types in a finishing workflow. The nylon tube and nylon lined construction deliver excellent chemical resistance with these materials, which helps maintain hose integrity when running different coatings through the same line. Good chemical resistance and non-corrosive characteristics also matter when hoses are left charged with material between shifts. The smooth cover helps cleaning when overspray or drips collect along the hose path in spray booths or production lines, supporting a tidier and safer work area.
The high tensile synthetic braid reinforcement is specially designed for maximum flexibility under pressure and maximum coupling retention, so the hose can flex as operators move without stressing the fittings. This combination supports stable flow and reduces the likelihood of connection problems during use. A working pressure of 500 psi provides a comfortable margin for many spray finishing systems, helping maintain consistent atomization at the gun when pressures rise. The Class B oil resistant smooth black synthetic rubber cover offers resilience if the hose is exposed to oil in the work area, which can support longer service life. The versatile 3/8 inch inside diameter and 25 foot length allow installers to standardize hose runs for many stations, simplifying layout changes or equipment moves. Using standard or existing fittings is supported by the 3/8 inch NPS female thread and three-piece plated brass reusable design, which helps integrate this hose into existing spray rigs or manifolds without special adapters.
The Binks 71-3303 fluid hose assembly is 25 feet long with a 3/8 inch inside diameter, which supports dependable fluid flow over a practical distance in spray finishing setups.
The fluid hose has a working pressure rating of 500 psi, allowing it to operate in many higher pressure finishing systems without becoming a limiting component in the setup.
The hose is described as ideal for resins and solvents in latices, epoxies, urethanes, alkyds, primers, acrylics, polyesters, silicones, bitumastic coatings, oil and water based paints, lacquers, alcohol, and latex coatings.
The hose uses a nylon tube for excellent chemical resistance and a high tensile synthetic braid reinforcement designed for maximum flexibility under pressure and strong coupling retention in use.
This fluid hose assembly uses three-piece plated brass reusable connections with a 3/8 inch NPS female thread, which works with equipment using matching 3/8 inch NPS male fittings.
The Fluidall hose has a temperature range from 0 degrees F to 190 degrees F maximum, supporting operation in many shop and finishing environments.
The Fluidall Hose Assemblies - Binks 71-3303 fluid hose assembly combines a 25 foot length, 3/8 inch inside diameter, and 500 psi working pressure to serve demanding finishing operations. Its nylon tube, high tensile synthetic braid reinforcement, and Class B oil resistant smooth black synthetic rubber cover provide chemical resistance, flexibility, and durability with many coatings. Three-piece plated brass reusable connections with 3/8 inch NPS female threads help integrate this hose into existing spray systems. For shops running varied coatings within its stated range, this versatile nylon lined fluid hose supports efficient, consistent fluid delivery across multiple stations.
Sold In: 1 Each