Sugatsune 275.9mm Folding Bracket, Anodized, - 38830-25

Sugatsune Folding Bracket 38830-25 For Drop Leaves

Sugatsune folding bracket 38830-25 is a 275.9mm aluminum drop leaf support that adds a locking, folding work surface where you need extra table length. The aluminum material with an anodized aluminum finish creates a rigid yet lightweight support arm, which helps keep leaf sag down without adding bulk under the work surface. This drop leaf support automatically locks when the flap is in the open position, so the leaf stays up without extra catches or props. A built-in release lever provides unlocking, allowing the leaf to be folded down smoothly when you want the area cleared. Designed for panel thickness from 5/8 inch to 1-3/8 inch, it fits a range of common worktops and leaves used in woodworking, shop benches, and utility tables. Maximum width ratings guide how wide you can build the leaf while maintaining dependable support in use.

Key Drop Leaf Support Details For Setup

• The aluminum material with an anodized aluminum finish provides a solid structural support arm that resists wear in regular table or work surface use, while keeping overall weight low for easier folding motion.
• The 275.9mm folding bracket length establishes a firm support footprint under the leaf, which helps carry the load of typical drop leaf extensions without extending too far into knee space.
• The drop leaf support automatically locks when the flap is in the open position, so once the leaf is raised it stays in working height, reducing the chance of accidental collapse during loading or work.
• The integrated release lever for unlocking lets you lower the leaf in a controlled way, streamlining daily changeover between open work surface and compact stored position.
• The design is intended for panel thickness from 5/8 inch to 1-3/8 inch, which covers many common top constructions and helps standardize leaf build-up across different projects.
• The maximum width for one drop leaf support is 23-5/8 inch, and the maximum width for two drop leaf supports is 51-3/16 inch, giving clear layout limits for single- or dual-support leaf designs.

Folding Bracket Mounting And Panel Sizing

This Sugatsune aluminum drop leaf support works by locking automatically when the flap reaches its open position, so mounting focuses on aligning the bracket with the leaf edge and fixed surface. With a design intended for panel thickness from 5/8 inch to 1-3/8 inch, it suits many standard tops built from plywood or composite cores with laminate or veneer. The maximum width rating of 23-5/8 inch for one support points to narrower leaves where a single bracket can carry the load, while 51-3/16 inch maximum width for two drop leaf supports supports wider extensions by spreading the load between brackets.

Using This Aluminum Table Hardware In Projects

Where This Folding Bracket Works Best

This aluminum table hardware support fits work surface and table applications where an extra section needs to pivot up and out of the way. The 275.9mm folding bracket length gives a balanced support arm under drop leaves on benches, service counters, and utility tables. With a design intended for panel thickness from 5/8 inch to 1-3/8 inch, it fits many shop-built tops using common sheet goods and edging methods. The automatic locking action in the open position suits situations where hands may be full while lifting the leaf, such as loading tools or materials onto an extended bench. An anodized aluminum finish pairs with the aluminum material to deliver a clean, metal appearance that ties in with other modern table hardware components.

Details That Support Reliable Drop Leaf Operation

The automatic lock when the flap is in the open position means the bracket provides dependable support without extra latches, helping reduce rework from misaligned catches. The release lever for unlocking gives a clear, single point of control when folding the leaf down, which simplifies the motion pattern for repeated daily use. Maximum width for one drop leaf support at 23-5/8 inch defines a practical upper limit for narrow leaves where one bracket handles the load, keeping deflection under control. Maximum width for two drop leaf supports at 51-3/16 inch lays out a straightforward rule for wider leaves, so spacing two supports under the panel spreads weight more evenly. The aluminum material with an anodized aluminum finish supports long-term use in typical woodworking and shop environments while keeping moving weight lower than many steel-based brackets.

Common Questions About This Drop Leaf Support

Select This Folding Bracket For Drop Leaf Projects

The Sugatsune folding bracket 38830-25 combines a 275.9mm aluminum arm, anodized aluminum finish, and automatic locking drop leaf support to handle everyday work surface extensions. Defined panel thickness and maximum width ratings give clear limits when sizing leaves for benches, counters, or tables. With a release lever for unlocking, the bracket supports repeat open-and-close cycles without separate catches, aligning well with trade and shop environments that need dependable folding work areas.