Sugatsune Magnetic Touch Latch For Clean Door Lines

Sugatsune magnetic touch latch gives cabinet and furniture doors a push-to-open action using an internal spring-loaded mechanism and magnet, so doors open smoothly without a traditional knob or pull in tight or clean-lined projects. The 1-3/4 inch length keeps the ML-80/WHT compact, which helps it fit into shallow cabinet frames or tight clearances common in built-ins. A white finish on the housing blends with light-colored casework, so the latch stays visually quiet on white cabinets and fixtures. Plastic ABS material in the housing keeps weight low while providing a consistent molded form, which supports repeatable mounting positions across multiple doors. The latch is classified as a single, one door type, so each unit is dedicated to operating one door in a run. This ML-80 magnetic touch latch design uses a 3.5 lb magnetic pull force to hold doors closed, which sets a defined feel for opening and helps keep doors from drifting open.

Key ML-80 Touch Latch Details For Pros

• The spring-loaded mechanism pushes the door open when pressed, which creates a simple, handle-free way to access cabinets where projecting hardware could interfere with use.
• Medium throw distance on this magnetic touch latch lets the door move out far enough to grasp, which supports everyday opening without adding excessive travel in shallow spaces.
• The 1-3/4 inch latch length keeps the ML-80/WHT compact, which helps with layout in narrow rails, stiles, or face frames where hardware space is limited.
• A 3.5 lb magnetic pull force holds the door against the cabinet, which provides a consistent closing feel that suits medium-light doors commonly used in cabinetry.
• The white finish on the plastic housing works with white or light finishes, which helps keep hardware visually unobtrusive in finished installations.
• Plastic ABS material in the housing provides a stable molded body, which supports accurate positioning relative to the strike plate in repeat installations.

Mounting This Magnetic Touch Latch For Operation

The ML-80/WHT magnetic touch latch operates by being mounted so its spring-loaded face lines up with the mating strike plate, allowing a push to release the door and a magnetic pull to draw it closed. The medium 9/16 inch throw length defines how far the mechanism can push the door out, which helps determine the setback from the cabinet front during layout. Mounting screws are not included for this latch, so fastener selection is chosen to match the cabinet substrate and the molded ABS housing. The single, one door type design means each latch-to-strike relationship is laid out for an individual door, which simplifies setting consistent gaps and reveals across a cabinet run. The compact 1-3/4 inch body makes it easier to position the latch where internal partitions or shelves restrict available mounting space.

Using The ML-80 Magnetic Touch Latch In Projects

Where This Touch Latch Integrates In Cabinet Work

The ML-80/WHT magnetic touch latch fits into cabinet, furniture, or fixture projects that call for a push-to-open function with a neutral white component. Its classification under locks and latches with latches product class places it in the core door hardware set, so it serves as the primary door securing method where magnetic pull is appropriate. The single, one door type layout suits individual cabinet doors or small panels, allowing each opening to have its own push-to-open point. The 3.5 lb magnetic pull force pairs well with medium throw distances, which creates a distinct closing and opening feel that works for frequently used doors. The 1-3/4 inch length and plastic housing make the latch suited to interior cabinetry where space efficiency and non-metallic hardware are preferred. White ABS material helps it visually align with white casework, so it integrates cleanly in residential or commercial millwork that uses light finishes.

Details That Support Consistent Push-To-Open Results

The spring-loaded mechanism in this Sugatsune magnetic touch latch defines how the door reacts to a push, giving a predictable pop-open motion that installers can plan around when setting gaps and stops. The medium 9/16 inch throw length indicates how far the door can move outward under spring force, which guides setback positioning so the door projects enough to grip without over-travel. The 3.5 lb magnetic pull force determines how firmly the door seats against the cabinet, which supports consistent alignment of the door edge with surrounding fronts. Plastic ABS housing keeps the latch profile uniform, helping alignment between the latch body and strike plate across multiple doors in a bank. The white finish on the housing means the visible portion of the latch blends with white interiors, which maintains a clean look when the cabinet door is open. As an ML-80/WHT single door type unit, each latch-strike pair can be tuned to the specific weight and swing behavior of that door.

Common Questions About The ML-80/WHT Touch Latch

Select The ML-80/WHT Latch For Push-To-Open Doors

The ML-80/WHT Sugatsune magnetic touch latch combines a 1-3/4 inch compact body, 3.5 lb magnetic pull force, and medium 9/16 inch throw to create a predictable push-to-open function on single doors. White ABS housing aligns with light cabinetry, while the spring-loaded mechanism delivers repeatable opening and closing behavior across cabinet or furniture projects that specify this latch type.