Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Excel Dowel 8mm x 30mm multi groove dowel pin defines the joint as a precise 8mm diameter by 30mm length, giving you a consistent reference for drilling depth and hole sizing in cabinet and furniture work. The multi groove detail describes a grooved surface along the dowel body that engages the drilled hole more positively, supporting a tight mechanical fit in standard woodworking substrates. As a dowel pin in the Fasteners | Dowels & Biscuits category, it serves as a solid wood-to-wood alignment element inside the joint, helping parts locate accurately during assembly. Being part of the Dowel Rods and Pins product class further clarifies that this piece is meant to be fully concealed in the joint, so faces and edges line up off the pin instead of surface hardware. The Excel Dowel brand and DP-830 MM identifier give a repeatable spec for shops standardizing on one size.
The 8mm dimension on this Excel Dowel dowel pin tells you the nominal hole diameter it is intended to work with, so boring setups can be centered on an 8mm bit across multiple machines. The 30mm length defines how far the pin extends into the stock, which supports layouts where each side of a joint shares the embedment for balanced strength. Because it is identified as a dowel pin rather than a through rod, it is intended to sit entirely within bored holes, keeping edges clean and relying on hole placement for alignment. Being categorized under Fasteners | Dowels & Biscuits frames it as a primary joining element in wood assemblies, so it can be planned into construction methods that depend on hidden internal connectors.
This DOWEL PIN, 8MMX30MM M-G is sized for joints laid out around an 8mm bore, which aligns well with many cabinet and furniture drilling patterns that favor metric spacing. Within the Dowel Rods and Pins class, this piece functions as an internal locator that ties panels or rails together from the inside, so outer faces can be referenced off the pin centerline during clamping. As part of the Fasteners | Dowels & Biscuits category from Wurth Baer Supply, it suits woodworking shops that prefer solid wood connectors over exposed metal fasteners in visible areas. The 30mm overall length lets it act as a bridge between two parts with shared hole depth, so planners can design consistent embedment on each side of the joint. The Excel Dowel brand naming provides a recognizable source for shops documenting bill-of-material standards around metric dowel construction.
The multi groove detail in the SAP description DOWEL PIN, 8MMX30MM M-G points to a surface profile shaped with multiple grooves rather than a smooth cylinder, which allows the dowel to bite into the bore wall for a more positive mechanical seat. That grooved geometry gives the pin more edge length along its body, so contact occurs at many points in the drilled hole and helps stabilize alignment as parts are pressed together. When every Excel Dowel 8mm x 30mm multi groove dowel pin shares the same diameter and length, production drilling can run from fixed templates knowing each pin will sit at a predictable depth. The defined DP-830 MM part number links that geometry to purchasing and job documentation, so repeat orders deliver the same multi groove profile that line workers are set up to use. Because it resides in the dowel pin segment of Fasteners | Dowels & Biscuits, it can be counted on as a dedicated internal connector rather than a general-purpose rod, which supports consistent fixturing and assembly planning around a single style.
The Excel Dowel DP-830 MM dowel pin is specified as 8mm in diameter by 30mm in length, so drilling and layout can be built around those exact dimensions.
The multi groove description indicates a grooved surface along the dowel body, creating more contact points in the bore so the pin seats firmly in the joint.
This 8mm x 30mm dowel pin is used as an internal wood fastener in cabinet and furniture joints, aligning parts through bored holes for concealed connections.
This dowel pin is categorized under Fasteners | Dowels & Biscuits and the Dowel Rods and Pins product class, positioning it as a dedicated wood-joining component.
The 8mm diameter defines the boring size used with this pin, allowing drilling stations to standardize on metric 8mm tooling across matching assemblies.
The 30mm length sets the available embedment through both mating parts, helping designers split hole depth evenly so joints draw together around the dowel center.
The Excel Dowel 8mm x 30mm multi groove dowel pin gives woodworking shops a defined 8mm diameter and 30mm length to base boring and joinery patterns on, which streamlines cabinet and furniture runs. Its role as a dowel pin within Fasteners | Dowels & Biscuits means it is purpose-built as an internal connector, so construction methods can be planned around hidden alignment rather than exposed fasteners. With the DP-830 MM part number tying this exact metric, multi groove configuration to purchasing, teams can keep the same joint geometry across repeat jobs and standardize processes around a single dowel size.
Sold In: 19200 Each