Extruded aluminum pulls 6 foot give you a continuous gripping edge across long cabinet or fixture runs, which helps create a consistent handling feel from one end of the panel to the other. This Dave Sanders and Company 1500 Series pull is made from extruded aluminum, so the profile stays uniform along the full 6 foot length, useful when multiple doors or panels must line up visually. The anodized aluminum finish adds a hard surface layer over the metal, which supports wear resistance in regular open-and-close use. A 1/16 inch wall thickness keeps the pull light while still providing a defined gripping edge where hands meet the panel. The pull is designed for 3/4 inch material, which matches common cabinet carcass and door thicknesses and helps you match the pull profile to standard shop layouts without reworking panel dimensions.
This Dave Sanders 1500 Series pull is specified for 3/4 inch material, so it is sized around one of the most common cabinet panel thicknesses. That helps you plan your edge profiles knowing the pull is intended to sit correctly with 3/4 inch stock. The 1/16 inch wall thickness means the metal profile occupies limited space at the edge, which is useful when you need to keep clearances tight between doors, drawer fronts, or adjoining panels. Because the pull is an extruded 6 foot length, it can be cut down to match specific door or panel widths during layout, which supports jobsite or shop adjustment to final dimensions.
The 6 foot overall length of the 1500SVC-6 part suits long cabinet runs, tall pantry doors, or wide fixture panels where a single continuous pull is preferred over multiple short pieces. As part of the Dave Sanders and Company 1500 Series, this pull matches that collection profile, which matters when coordinating new work with existing 1500 Series details. The design for 3/4 inch material aligns with standard cabinet carcasses and doors, so it fits naturally into many shop-built casework programs. Extruded aluminum keeps the profile straight along its length, which supports neat alignment across multiple doors when cut into shorter sections for uniform handles.
The extruded aluminum material used in this pull provides a stable, predictable shape over the full 6 foot run, which simplifies setting up stops or jigs when cutting multiple pieces to the same size. The 1/16 inch wall thickness creates a defined but slim edge, which helps maintain consistent reveals between adjacent 3/4 inch panels once the pull profile is integrated into the layout. The anodized aluminum finish adds a controlled surface layer, which supports a uniform appearance across all pieces cut from the same length, important when several fronts sit side by side. Matching the pull to 3/4 inch material thickness helps reduce rework because the geometry is already oriented to that common dimension, and the 1500 Series designation ties the piece to a known profile family for repeat use on future projects.
The Dave Sanders and Company 1500SVC-6 pull is specified as 6 foot long, which lets you span wide cabinet sections or cut multiple shorter pulls from a single length.
The 1/16 inch wall thickness keeps the pull profile slim while still defining a clear grip edge, which helps maintain tight door and drawer clearances on 3/4 inch panels.
The 1500 Series 1500SVC-6 pull is made from extruded aluminum, which provides a consistent shape along the 6 foot length for uniform cutting and alignment.
The 1500SVC-6 pull has an anodized aluminum finish, giving the surface a treated metallic appearance suited to the 1500 Series look.
This Dave Sanders and Company pull is designed for 3/4 inch material, aligning with common cabinet panel and door thicknesses used in many shops.
The 1500SVC-6 designation identifies a 1500 Series extruded aluminum pull in a 6 foot length, which helps match this piece to other 1500 Series components.
The Dave Sanders and Company 1500 Series 1500SVC-6 extruded aluminum pull ties a 6 foot length, anodized aluminum finish, and 1/16 inch wall thickness to standard 3/4 inch material. That combination supports straightforward planning when laying out cabinet fronts, fixture panels, or casework runs using the 1500 Series profile. For projects built around 3/4 inch stock where a continuous aluminum gripping edge is desired, this pull provides a defined, consistent profile ready to cut to your required dimensions.
Sold In: 1 Each