Outwater Industries Tambour Track Curve 2-5/8"W x D, Plastic - 4C55

Tambour Track Curve 4C55 For Cabinet Doors

tambour track curve 4C55 is a brown plastic curve section from the value line of tambour door track hardware, so it forms the curved path your tambour door needs to travel smoothly in appliance garages and similar cabinet applications. This curve is part of the Outwater Industries system designed specifically for tambour material 1/4 to 5/16 inch thick, which keeps the slats guided correctly when paired with matching straight track. The outside dimensions of this curve match the other value line track type, which helps maintain consistent clearances when laying out cabinet interiors. As a plastic component, the curve works with spray silicone or similar spray lubricant, supporting low-friction movement along the bend of the track. The manufacturer part number 4C55 identifies this specific curve style within the value line family, helping align it with the correct straight track and tambour thickness range during planning or replacement.

Key Tambour Curve Details That Support Use

• The brown plastic construction provides a uniform surface for the tambour door to glide over, which supports consistent movement along the curved section of the track run.
• Being part of a value line of tambour door track hardware, this curve is matched to a coordinated system, which helps maintain predictable fit with the specified tambour thickness range.
• The design for 1/4 to 5/16 inch thick tambour material keeps the door centered in the track, which reduces binding as the door transitions through the curve.
• Outside dimensions that are identical to the alternate track type allow layouts using either style to share similar cabinet clearances, simplifying planning around interior space.
• The curve works within a two-track system using track and curve components, which establishes a complete guided path for opening and closing a tambour door in cabinetry.

Tambour Curve Mounting And Track Connection Details

The track and curves are attached to cabinetry with screws or staples through the track's leading edge, so installers can fasten the curve directly to cabinet panels while keeping fasteners positioned along the front side of the track profile. A tab on the curve track piece fits into a slot on the straight track piece to hold the straight and curved pieces together, which locks the joint and keeps the running surface aligned where the tambour travels from straight run into the bend. The track and curves must be lubricated with a spray lubricant such as spray silicone, so the moving tambour slats experience reduced friction as they slide through the curve and along the straight sections. Together, these details support a secure installation and a smoother operating path for the tambour door over repeated openings and closings.

Using This Outwater Tambour Track Curve In Cabinets

Where Tambour Track Curve 4C55 Fits Best

This Outwater Industries tambour track curve 2-5/8 inch wide is part of an appliance garages and tambour doors product class, so it fits cabinet situations where a rolling, flexible door needs to travel around a curve into an upper or rear compartment. The curve pairs with straight track identified as OW4C55 and OWT54, which are designed for tambour material 1/4 to 5/16 inch thick, so both straight and curved sections share the same channel size for a continuous run. Because the outside dimensions of this curve and the alternate value line track type are identical, the curve can be integrated into layouts that rely on consistent track size where cabinets line up. In practice, this allows the tambour door to follow a controlled, repeatable path as it moves from the straight opening area into the storage zone guided by the curve.

How Track Details Support Smooth Tambour Door Travel

The requirement that the track and curves be lubricated with a spray lubricant such as spray silicone reduces friction where the tambour slats contact the brown plastic curve, which supports quieter, easier door movement along the full track route. The tab on the curve track piece that fits into a slot on the straight track piece keeps the joint tight and aligned, which limits snag points and helps the tambour pass from straight into curved sections without catching. The design that matches 1/4 to 5/16 inch thick tambour material holds the door within a defined channel width, so the slats stay guided while flexing through the bend. As a value line tambour door track hardware component, this curve works within a coordinated system of track and curve parts, supporting repeatable installations across multiple cabinets using the same tambour thickness and track profile.

Common Questions About This Tambour Track Curve

Choose Tambour Track Curve 4C55 For Matched Systems

The Outwater Industries tambour track curve 4C55 offers a brown plastic curve sized for tambour material 1/4 to 5/16 inch thick, so it fits directly into systems using the matching OW4C55 and OWT54 track components. The tab-and-slot joint between the curve and straight track keeps the running surface aligned, supporting reliable travel as the door moves into the cabinet. With outside dimensions identical to the alternate value line track type, this curve maintains consistent cabinet clearances across layouts. For appliance garages and other tambour door cabinets built around this thickness range and track profile, selecting this curve helps create a coordinated, smooth-running tambour door path.