Pencil Drawer Mount 75 lb Ball Bearing Slides 3/4" Extension Slides with Variable Height Adjustment Anochrome 14" Length

Pencil Drawer Mount Slides For Adjustable Trays

Pencil drawer mount ball bearing slides describe Knape and Vogt model 8250P 14, which are 14 inch length pencil drawer and keyboard tray slides built to support up to 75 lb, so they handle typical office or workstation loads with consistent movement. These slides use ball bearing construction, which provides a smoother travel under load, helping drawers feel controlled along their full 3/4 extension. The slides are specified as 3/4 extension, meaning the drawer or tray opens most of its depth while some length remains engaged, which aids stability for writing surfaces or keyboard use. The product is identified as a pencil drawer and keyboard tray slide class, so it is intended for shallow, work-surface-mounted pullouts rather than deep storage drawers. Available finishes are listed as anochrome, so the slides present a neutral metallic appearance that suits common commercial and shop environments.

Key Working Details For Drawer Slide Selection

• These slides carry a recommended load rating of 75 lb, which supports typical pencil drawers and keyboard trays in office or shop furniture without overstressing the mechanism in normal duty.
• The 14 inch length specification defines how far the tray can extend, so builders can size the pencil drawer or keyboard tray depth around that working dimension for predictable reach.
• Side clearance is given as 1-5/8 inch per side outboard and 17/32 inch per side inboard, which informs how to size the tray and surrounding structure so the slide members align and run freely.
• The side height, or overall drop height, adjusts from 2-11/32 inch to 3-11/16 inch in 7/32 inch increments, letting installers position the tray height under the work surface to match ergonomics or clearance needs.
• Mounting brackets adjust to 7 heights within that 2-11/32 inch to 3-11/16 inch range in 7/32 inch increments, so installers can repeatedly set tray height using discrete steps rather than measuring from scratch each time.
• An anti-bounce feature is stated, which helps the tray stay seated when closed, reducing unwanted movement during normal use in office or shop environments.

Installation Details For 8250P 14 Slide Setup

The manufacturer identifies these as KV model 8250, made in the USA, which gives a clear reference for matching the slides to documentation and other 8250 series components during layout. Recommended fasteners are #7 x 1/2 inch Phillips pan head (WW44190), so installers can choose a screw size and head style that matches the slide holes and provides proper bearing without overhanging. The listed side clearances of 1-5/8 inch per side outboard and 17/32 inch per side inboard guide how to locate the members relative to the tray and supporting structure, helping the ball bearing sections run without binding. The adjustable overall drop height range of 2-11/32 inch to 3-11/16 inch in 7/32 inch increments allows installers to set consistent tray spacing under countertops or desktops across multiple stations.

Using Pencil Drawer And Keyboard Tray Slides Effectively

Where These Adjustable Pencil Drawer Slides Fit

These slides are defined under the product class Pencil Drawer and Keyboard Tray Slides, so they are intended for shallow pullouts mounted under work surfaces where writing instruments, paperwork, or keyboards are stored. The 14 inch length works well for common desk and workstation layouts, giving enough travel for access while keeping the slide members under the supporting panel. Side clearance values of 1-5/8 inch per side outboard and 17/32 inch per side inboard steer cabinetmakers toward building tray widths and supports that match the slide geometry, which helps reduce alignment problems in repetitive production. The adjustable overall drop height from 2-11/32 inch to 3-11/16 inch in 7/32 inch increments lets installers position trays below the top surface to match user reach, monitor height, or existing casework reveals. The anochrome finish supports use in environments where a neutral metallic appearance is preferred under desks, counters, or shop benches.

Details That Support Consistent Alignment And Results

Mounting brackets that adjust to 7 heights between 2-11/32 inch and 3-11/16 inch in 7/32 inch increments simplify repetitive installations, because installers can use the same increment settings to replicate tray height station to station. The 3/4 extension action provides most of the tray travel while keeping some slide length engaged, which contributes to stability when a user rests weight on a pencil drawer or keyboard tray near full extension. The 75 lb rating sets expectations for how the slides respond under typical office and light shop loading, helping specifiers match these to pencil drawers instead of heavy filing drawers. The anti-bounce feature reduces tray movement after closing, which is useful where frequent in-and-out use could otherwise leave trays drifting open. The recommended #7 x 1/2 inch Phillips pan head fasteners (WW44190) match the slide design, which supports consistent clamping and reduces deformation at the mounting points during installation.

Common Questions About 14 Inch 8250P Slides

Selecting 14 Inch Slides For Pencil Drawers

Choosing Knape and Vogt pencil drawer mount ball bearing slides with 14 inch length, 75 lb rating, and adjustable drop height from 2-11/32 inch to 3-11/16 inch lets you match tray depth, side clearance, and under-counter spacing to the 8250P 14 specification for consistent installations.