
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Famowood wood filler solvent based is a 6 oz oak/teak wood filler designed to repair holes and cracks so they can be finished like surrounding wood. The solvent-based formula can be stained, sawed, drilled, sanded, planed and nailed like real wood, which lets you treat patched areas using the same tools and steps already used on the job. The filler shows no noticeable signs of shrinkage, cracking or crumbling, supporting stable repairs where movement would stand out under stain or paint. It can be used indoors or outdoors, so the same product can serve for cabinet work, trim, or exterior repairs where exposure varies. The filler adheres to any clean surface and has outstanding adhesive properties, helping it bond to prepared substrates so the patch stays tight through later sanding and finishing steps.
This solvent-based wood filler is quick dry and ready to use out of the can, so it goes directly from container to the repair without separate mixing steps and supports steady progress on site or in the shop. The filler spreads smoothly and fills holes or cracks evenly, which helps create a level surface for later sanding and reduces the effort needed to flatten the repair. Once cured, the patch can be sanded and planed to blend into surrounding material, allowing clean transitions between original wood and the filled area. Because it can be painted, varnished, lacquered, stained and oiled, the same repair can move into almost any common finish schedule and visually tie into the final surface.
This Famowood wood filler, classified as a wood filler in the adhesives and caulks category, is intended for filling any hole or crack where a solid, workable surface is required before finishing. The 6 oz oak/teak version aligns with oak and teak tones, which supports color coordination when staining or finishing similar species. Its ability to be used indoors or outdoors means it can serve on interior trim, cabinetry and furniture as well as exterior areas that will receive compatible finishes. Because the filler adheres to any clean surface and has outstanding adhesive properties, it can bond to properly cleaned repair areas so the filled region becomes part of the surface system before coatings are applied.
The fact that this solvent-based filler can be stained, sawed, drilled, sanded, planed and nailed like real wood means the repaired area can go through cutting, fastening and shaping steps without switching materials, which simplifies sequencing. Its resistance to noticeable shrinkage, cracking or crumbling helps the patch remain stable under finishes so edges stay tight and surfaces stay smooth after curing. Quick drying behavior helps fit into schedules where repairs must be completed and finished without extended downtime. Compatibility with paint, varnish, lacquer, stain and oil allows one repair to accept different topcoats, so finish decisions can follow project requirements rather than filler constraints. Being ready to use out of the can with smooth spreading and even filling supports repeatable application, giving a consistent base for sanding and final appearance.
Famowood 36141128 is a solvent-based wood filler classified under wood putty and fillers, so it is intended to fill defects in wood before the finishing steps.
This Famowood wood filler can be used indoors or outdoors, so a single filler can serve both interior and exterior repair locations when finishing requirements match.
The solvent-based filler can be stained, sawed, drilled, sanded, planed and nailed like real wood, letting the repaired area follow the same tooling steps as surrounding stock.
The Famowood filler can be painted, varnished, lacquered, stained and oiled, which allows the repair to align with a wide range of finish systems on the project.
The filler shows no noticeable signs of shrinkage, cracking or crumbling, helping repairs stay stable so surface quality is maintained after finishing work.
This filler adheres to any clean surface and has outstanding adhesive properties, so once applied to a clean area it remains bonded through sanding and finishing stages.
The Famowood solvent-based 6 oz oak/teak wood filler combines indoor and outdoor use with the ability to be worked like real wood, so it supports a wide range of repair tasks. Its quick dry, ready-to-use formula with smooth spreading and even filling of holes or cracks helps move projects efficiently from repair to finishing. With strong adhesion to clean surfaces and resistance to noticeable shrinkage, cracking or crumbling, it is suited to repairs that need to remain stable under paint, varnish, lacquer, stain or oil. For woodworking and finishing workflows that need a filler that integrates into normal tooling and coating steps, this Famowood wood filler aligns with those job demands.
Sold In: 1 Can