Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt oval closet rod is a steel closet tubing solution designed for hanging storage where a continuous, straight run is needed. The rod is constructed of steel, so it delivers a rigid hanging surface that supports typical closet loads without deforming in normal use. Its wall thickness is 1/2 inch, which provides substantial material between the hanging load and the hollow interior, helping the rod resist denting when hangers are concentrated in one area. The oval profile measures 1-1/8 inch high by 5/8 inch wide, creating a low-profile front edge while maintaining vertical strength, which helps keep hanging items aligned while reducing side-to-side twist. The chrome finish gives the tubing a bright surface that suits visible closet interiors, so the rod can be used in both residential and commercial storage where appearance matters alongside function.
This Knape and Vogt closet rod has an oval cross-section that is 1-1/8 inch high and 5/8 inch wide, so layout for supports and related hardware can be planned precisely around those dimensions. The 1/2 inch wall thickness means that cutting and drilling operations work through substantial steel, which supports clean cuts when sizing pieces to specific openings. The 12 foot length designated by 880 CHR 144 provides continuous stock that can be cut into multiple segments, so sections can be tailored to reach between end supports while maintaining the same profile throughout a project. Because the tubing is steel with a heavy gauge welded seam, the profile stays consistent along the length, which helps when aligning mating components that match the oval shape.
The Knape and Vogt chrome 880 CHR 144 closet rod is suited to closet, shelf, and garage organization layouts where an oval steel tube is needed for hanging garments or gear. Its 12 foot length supports long wall-to-wall closet designs, allowing a single continuous rod to span multiple cabinet sections before being cut to size. The 1-1/8 inch by 5/8 inch oval profile works with layouts that expect a taller vertical dimension for strength, so the rod aligns well with closet designs that concentrate weight along the length. The steel construction with a heavy gauge welded seam gives the rod the rigidity expected in closet rods and flanges projects, which helps maintain alignment between mounting points in typical storage environments. The chrome finish coordinates with other chrome closet hardware, supporting visually consistent installations in wardrobe areas or storage rooms.
The 1-1/8 inch height and 5/8 inch width provide a predictable oval shape, so once measurements are established for one opening, installers can repeat the same dimensions across multiple closets for consistent clearances. The 1/2 inch wall thickness supplies enough material for cutting operations without crushing the tube, which aids in producing square ends that seat properly in supporting components. Because the tubing is built from steel with a heavy gauge welded seam, the seam helps hold the oval geometry during handling, reducing distortion as lengths are moved, stored, or cut. The 12 foot stock length under the 880 CHR 144 designation is especially useful on multi-unit projects, since one length can be divided into several shorter rods while keeping the same chrome finish and profile across all sections. The chrome surface also offers a smooth interface with hanger hooks, so garments can be shifted along the rod without snagging, which supports user-friendly day-to-day closet use.
The Knape and Vogt closet rod has an oval profile measuring 1-1/8 inch high by 5/8 inch wide, so planning for clearances and mating components can use those fixed dimensions.
The 880 CHR 144 closet rod is supplied as a 12 foot length, allowing long continuous runs or multiple shorter rods cut from the same piece for consistent installations.
This oval closet rod is constructed of steel with a heavy gauge welded seam, which provides a rigid tube profile that supports typical closet hanging loads along its length.
The 1/2 inch wall thickness gives the steel tubing substantial material, helping it resist denting from hanger hooks and supporting clean cuts when sizing pieces to the opening.
The chrome finish provides a smooth, bright surface, so metal hanger hooks slide easily along the rod while also giving closets a clean, finished appearance.
The 12 foot steel rod with a consistent 1-1/8 by 5/8 inch oval profile can be cut into several sections, supporting multiple closets that share the same rod specification.
The Knape and Vogt chrome 1-1/8 inch by 5/8 inch oval closet rod, in the 12 foot 880 CHR 144 length, suits projects that need long, continuous steel hanging runs with a consistent profile. Its 1/2 inch wall thickness and heavy gauge welded seam give the tubing strength useful for typical closet hanging tasks. The chrome finish coordinates well with other chrome storage components, supporting unified closet, shelf, and garage organization layouts. For projects where multiple openings must share the same rod dimensions and appearance, this steel oval rod provides a repeatable specification from one job to the next.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  KV880CHR-96 Mfr# 880 CHR 96 | KV 15 mm x 30 mm x 96" Oval Closet Rod, Chrome, 880 CHR 96 |
